发布求助
文献互助 智能选刊 最新文献

International Journal of Mechanical and Production Engineering Research and Development最新文献

筛选
英文 中文
Modeling And Improvement of the Surface Roughness Model in Hole Turning Process 3x13 Stainless Steel by Using Johnson Transformation 3x13不锈钢孔车削加工表面粗糙度模型的Johnson变换建模及改进
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun20201157
N. Nguyen, Tjprc
{"title":"Modeling And Improvement of the Surface Roughness Model in Hole Turning Process 3x13 Stainless Steel by Using Johnson Transformation","authors":"N. Nguyen, Tjprc","doi":"10.24247/ijmperdjun20201157","DOIUrl":"https://doi.org/10.24247/ijmperdjun20201157","url":null,"abstract":"In this paper, a study was performed to improve the accuracy of the surface roughness model when hole turning the 3X13 steel by using response surface methodology (RSM) and Johnson transformation. This study was presented including three contents that were determination of the influence degree of cutting velocity, feed rate, depth of cut, and cutter nose radius on the surface roughness, building the regression model of the surface roughness by a quadratic model of above input parameters, and building the surface roughness model by using Johnson transformation. By experimental data and using analysis of variance (ANOVA), the influence of input parameters on surface roughness was investigated. Feed rate that was a factor has the most influence on the surface roughness, the influence of the cutter nose radius and cutting velocity on the surface roughness was smaller than the influence of feed rate on the that one. Cutting depth has a negligible effect on surface roughness. The interaction between the feed rate and the depth of cutting has the greatest effect on surface roughness, followed by the degree of interaction between the cutting velocity and the cutter nose radius. The interaction between other factors has a negligible influence on the surface roughness. Besides, the surface roughness model was improved to increase the accuracy by using Johnson transformation. These models have been verified and evaluated by comparison process between the predicted and measured surface roughness. The model using the Johnson transformation was more accurate than the model using without the Johnson transformation. Johnson transformations can be applied to improve the accuracy of surface roughness prediction models in the hole turning processes.","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"86 3 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84012130","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Self Esteem and its Relationship To Life Satisfaction and Emotional Intelligence, An Exploratory Study Amongst Secondary 中学生自尊与生活满意度、情绪智力的关系
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun2020273
Amit Kumar et al., Amit Kumar et al.,
{"title":"Self Esteem and its Relationship To Life Satisfaction and Emotional Intelligence, An Exploratory Study Amongst Secondary","authors":"Amit Kumar et al., Amit Kumar et al.,","doi":"10.24247/ijmperdjun2020273","DOIUrl":"https://doi.org/10.24247/ijmperdjun2020273","url":null,"abstract":"","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"54 3 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82690175","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Role of Web Infrastructure in Influencing Security Concerns and Purchase Intention of Online Customers 网络基础设施对网络用户安全关注和购买意愿的影响
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun20201245
Rashmi S Chaudhry et al., Rashmi S Chaudhry et al.,
{"title":"Role of Web Infrastructure in Influencing Security Concerns and Purchase Intention of Online Customers","authors":"Rashmi S Chaudhry et al., Rashmi S Chaudhry et al.,","doi":"10.24247/ijmperdjun20201245","DOIUrl":"https://doi.org/10.24247/ijmperdjun20201245","url":null,"abstract":"","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"13 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83025151","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Design and Fabrication of Manual Paddy Sapling Transplanting Machine 人工水稻插秧机的设计与制造
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun20201274
Rajesh Kumbara S K et al., Rajesh Kumbara S K et al.,
{"title":"Design and Fabrication of Manual Paddy Sapling Transplanting Machine","authors":"Rajesh Kumbara S K et al., Rajesh Kumbara S K et al.,","doi":"10.24247/ijmperdjun20201274","DOIUrl":"https://doi.org/10.24247/ijmperdjun20201274","url":null,"abstract":"","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83125222","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Effect of Different Layup Sequences on Vibration Response of Kenaf Core Reinforced Composite Foam 不同铺层顺序对红麻芯增强复合泡沫材料振动响应的影响
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun20201278
M.Y. Yuhazri et al., M.Y. Yuhazri et al.,
{"title":"Effect of Different Layup Sequences on Vibration Response of Kenaf Core Reinforced Composite Foam","authors":"M.Y. Yuhazri et al., M.Y. Yuhazri et al.,","doi":"10.24247/ijmperdjun20201278","DOIUrl":"https://doi.org/10.24247/ijmperdjun20201278","url":null,"abstract":"","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89929683","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Electrically Operated Stair Lift for Differently Abled Person 为残疾人士而设的电动楼梯升降机
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun20201268
Keerthana D et al., Keerthana D et al.,
{"title":"Electrically Operated Stair Lift for Differently Abled Person","authors":"Keerthana D et al., Keerthana D et al.,","doi":"10.24247/ijmperdjun20201268","DOIUrl":"https://doi.org/10.24247/ijmperdjun20201268","url":null,"abstract":"In this fast-growing world with huge technologies and resources, the need for precise control of wheelchair over stairs is not so far into successful existence. Not all the wheelchair proposed are portable and handy to operate. This journal aims to present a wheelchair which could climb over the stairs. This describes the electrically operated wheelchair-using battery; it can climb upon stairs by the help of the belt drive placed at the rear side of the chair model. It includes a switch for forwarding, backward, starts and stop. The chair set up is already been made attached along with the drive belt and it tends to be portable and easy in handling, as the start button is pressed the battery-driven belt starts to rotate along forwarding direction when the forward button is pressed and the same happens when the chair is brought down with the reverse button. This overall setup is made portable and handy in operation when compared with other models.","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"17 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79230597","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
The Effects of Climate Change on Rural Livelihood Ecosystem 气候变化对农村生计生态系统的影响
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun2020583
Dr. Pavnesh Kumar et al., Dr. Pavnesh Kumar et al.,
{"title":"The Effects of Climate Change on Rural Livelihood Ecosystem","authors":"Dr. Pavnesh Kumar et al., Dr. Pavnesh Kumar et al.,","doi":"10.24247/ijmperdjun2020583","DOIUrl":"https://doi.org/10.24247/ijmperdjun2020583","url":null,"abstract":"","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"14 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"75784522","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A Simulation Study of Domestic Hot Water for Flat Plate Solar Collector Using Transient System Simulation Software (TRNSYS) 基于瞬态系统仿真软件(TRNSYS)的平板太阳能集热器生活热水模拟研究
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun20201275
Mohd Afzanizam Mohd Rosli et al., Mohd Afzanizam Mohd Rosli et al.,
{"title":"A Simulation Study of Domestic Hot Water for Flat Plate Solar Collector Using Transient System Simulation Software (TRNSYS)","authors":"Mohd Afzanizam Mohd Rosli et al., Mohd Afzanizam Mohd Rosli et al.,","doi":"10.24247/ijmperdjun20201275","DOIUrl":"https://doi.org/10.24247/ijmperdjun20201275","url":null,"abstract":"","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"366 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74913575","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Experimental Investigation on Flow Properties of Muskmelon Pulp using Controlled Stress Rheometer 控制应力流变仪对甜瓜果肉流动特性的实验研究
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun2020510
D. Ramesh Babu D. Ramesh Babu, Tjprc
{"title":"Experimental Investigation on Flow Properties of Muskmelon Pulp using Controlled Stress Rheometer","authors":"D. Ramesh Babu D. Ramesh Babu, Tjprc","doi":"10.24247/ijmperdjun2020510","DOIUrl":"https://doi.org/10.24247/ijmperdjun2020510","url":null,"abstract":"An experimental study was conducted on muskmelon fruit pulp using a controlled stress Rheometer. The flow behavior, Consistency index is calculated using the flow data of shear stress and shear strain. The pulp behaved thixotropic in nature. Three models are used to explain the flow behavior, viz. Casson, Ostwald and Herschel-Bulkley. Mathematical modeling of data from the curve of Shear Stress Vs Shear rate indicated that Herschel-Bulkley model fitted the best with correlation coefficient of 0.99. The stress required to indicate viscous nature is found to be 3.3 Pa as per Casson model, which precisely indicates the stress required to initiate flow. This behavior appears same as tomato ketchup or sauce flow from the thermally processed glass bottles. The thixotropic loop experiment has confirmed the solid nature of the pulp with a residual stress of 3.1 Pa. This data is useful to design equipment for thermal treatment of fruit pulp, fluid flow in heat exchangers of food processing lines and further reference studies of flow behavior of different fruit pulps. Dr S Jagan Mohan Rao has 29 years of work experience in teaching, research (Active power control of sub-merged arc furnaces for the production of Ferro-chrome and Ferro-silicon, and, Control of steam bus for 2 turbines) and industry (Power sector and Ferro alloys). Expertise in tailoring of Distributed Control Systems, Programmable Logic Controllers and SCADA systems.","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"2 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76188365","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Experimental Study of Non- Autoclaved Lightweight Concrete Prepared by Bagasse Ash 蔗渣灰制备非蒸压轻量混凝土的试验研究
International Journal of Mechanical and Production Engineering Research and Development Pub Date : 2020-01-01 DOI: 10.24247/ijmperdjun20201383
Nishant Kumar, Tjprc
{"title":"Experimental Study of Non- Autoclaved Lightweight Concrete Prepared by Bagasse Ash","authors":"Nishant Kumar, Tjprc","doi":"10.24247/ijmperdjun20201383","DOIUrl":"https://doi.org/10.24247/ijmperdjun20201383","url":null,"abstract":"This experimental study is mainly focused on the production of lightweight concrete using bagasse ash as the partial replacement of the cement in the non autoclaved concrete. The dead load of the building also consists of a load of partition walls and normal mortars. Bagasse Ash has a low density which also reduces the weight of concrete. The introduction of bagasse ash makes increment in compressive strength by 10% and split tensile Strength by 10.5%. it also decreases the cost of lightweight concrete by 12%. The prepared concrete has 20 percent more water absorption but 5% lesser dense.","PeriodicalId":14009,"journal":{"name":"International Journal of Mechanical and Production Engineering Research and Development","volume":"57 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76932642","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
首页 上一页
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整，为了账户安全，请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们：info@booksci.cn Book学术提供免费学术资源搜索服务，方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号：604180095
Book学术官方微信
小红书