Traktory i sel hozmashiny最新文献

{"title":"The Method of Determination of Properties of Air Springs with Two Pressure Stages and Counterpressure","authors":"O. Nakaznoy, A. Tsipilev","doi":"10.17816/0321-4443-100285","DOIUrl":"https://doi.org/10.17816/0321-4443-100285","url":null,"abstract":"BACKGROUND: The issues of choosing reasonable properties for suspension system of wheeled vehicles, including vehicles for agricultural purposes, still remain relevant, especially for the vehicles, which load capacity is comparable to their curb mass. Significant difference between static loads, acting in suspension under the curb and total masses of a vehicle, is a consequence of high load capacity. Two or three times difference is possible (depending on axles load distribution), whereas 70% to 80% of mass of trailing load is on rear axles. Use of convenient suspension systems with metal springs is not able to ensure demanded nonlinearity of properties, where non-zero static wheel travel under the curb mass is kept with reasonable value of period of vertical eigenmodes for curb-massed and total-massed vehicle as well as with dynamic factor value. Air springs with two pressure stages are more advanced solution, as they allow choosing stiffness for small and large wheel travel by means of operation of different pressure stages, which volumes are conditioned by differents stiffnesses in area of static displacement. \u0000AIMS: The aim of the study, which results are given in this paper, is to develop the method of determination of main design parameters and characteristics of air springs with two pressure stages (stiffnesses) and counterpressure, applicable for ensuring non-zero static wheel travel of curb-massed vehicles with keeping the given value of dynamic factor. \u0000METHODS: The analytical analysis methods are used. \u0000RESULTS: An example of implementation of the developed method for the KamAZ-53215 Selhoznik truck is given as the study result. \u0000CONCLUSIONS: The dependencies, presented in the paper, make possible to determine main design parameters of uncontrolled air suspensions with two pressure stages (and stiffnesses) and counterpressure for wheeled vehicles, which give an opportunity to ensure given values of static wheel travel and dynamic factor and, in addition, provide insignificant increase of stiffness in comparison to air suspensions without counterpressure.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"509 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122761427","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The creators of tracked agricultural tractors. Dedicated to the 90th anniversary of the first domestic tractor engineering bureau","authors":"Vyacheslav V. Kosenko","doi":"10.17816/0321-4443-108130","DOIUrl":"https://doi.org/10.17816/0321-4443-108130","url":null,"abstract":"90 years ago, in 1932, Design and Experimental Department (DED STP) was established at Stalingrad Tractor Plant the first specialized design department of tractor engineering in our country. During the time of existence of this department, the factory chief design engineers were V.G. Stankevich (19321938), M.M. Romanov (19381940), V.A. Kargopolov (19431949), A.K. Platonov (19491950), A.Ya. Merilov (19511957), M.A. Sharov (19581980), V.P. Shevchuk (19801996), V.Ya. Bokov (19961998), I.A. Dolgov (19982005), V.V. Kosenko (20062010). The article contains the review of main achievments, made by the department, led by each of them. Throughout these years 5 families of tracked agricultural tractors were developed at Stalingrad (Volgograd from 1961) Tractor Plant, such as STZ-NATI, DT-54, DT-75, DT-175S and VT-100, with a wide range of special modifications (transport, swamp, hillside, peat, plowing and cultivating, etc) and configurations. Short stories of the creation of these machines, their characterisics and advantages over the predcessors are given. The tractors of STP (VgTP) were used in agriculture as well as in many other areas of our countrys economy, were exported to foreign countries and deserved respect and love from tractor drivers and maintenance specialists. Overall about 4 million tractors were produced according to technical documentation, developed by design engineers of STP (VgTP) or with their direct involvement.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"95 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123289426","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Physical and chemical analysis of watered engine oil","authors":"A. Kolunin","doi":"10.17816/0321-4443-101115","DOIUrl":"https://doi.org/10.17816/0321-4443-101115","url":null,"abstract":"BACKGROUND: The condition of engine chemistroils работыdefines reliability of piston engines operation additivessubstantially. However, colloid-chemical transformation, influenced by various factors, including oil watering, takes place in oils during storage and application. There is variety of ways how water may inflow in engine oils. \u0000AIMS: The aim of the study is to reveal consequences of oil watering and negative influence of water on operational properties of engine oils. \u0000METHODS: Watering of production engine oils was carried out in laboratory conditions. Mixes hazievof engine oils with water were prepared in various proportions. Influence of water on the condition of engine ёмкостoils уровнемwas estimated by visual observation, as well asокисления with application of the methods according to GOSTя and ASTM standards. The laboratory equipment, produced in Russia and the USA, provides comprehensible depth of scientific knowledge of physical and chemical processes. \u0000RESULTS: The assessment of water influence on the engine oil condition was carried out on the basis of observation and the analysis of charactieristic curves. Change of concentration of additives, dissolved at the oil base, was estimated with change of base number and indicator elements. \u0000CONCLUSIONS: The practical significance of this study involves integrity of the approach to the issueизменению of the engine oil condition change, influenced by water, regarding the concentration of the dissolved additives. Unjustifiably active processes of corrosion and wear of details surfaces are possible consequences of oil watering. Crankshaft bearings coating has the highest vulnerability to the influence of acids. The mentioned consequences have a negative impact on service life and reliability of piston engines operation.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"43 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114875491","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Experimental assessment of the temperature state of tractor diesel pistons","authors":"V. P. Belov, D. V. Apelinskiy, Vadim N. Bezhenar","doi":"10.17816/0321-4443-105717","DOIUrl":"https://doi.org/10.17816/0321-4443-105717","url":null,"abstract":"INTRODUCTION: The paper presents the operating conditions of tractor diesel engines that cause the appearance of thermal fatigue cracks on the edges of the piston combustion chamber. The presence of sharp edges of the combustion chamber in the pistons, which are stress concentrators, leads to an increase in the probability of their destruction and thereby limits the engine life of the diesel engine. The main reasons for the formation of cracks in the zone of the edge of the combustion chamber are indicated. \u0000AIMS: The aim of this study is the assessment of the temperature state of pistons of the D-240 and the D-245 tractor diesel engines, produced by Minsk Motor Plant (MMP). \u0000METHODS: Temperature gauging was carried out according to the method in order to identify the nature of changing of piston heads temperatures under stationary and nonstationary operation modes of diesel engines. Transfering of thermal electromotive force from thermocouples to measuring devices was carried out by means of an intermittent current collector. Imitaion of nonstationary operation modes was carried out by means of changing the cyclic feed of a high pressure fuel pump, using a reversible electric motor. \u0000RESULTS: The data of the temperature state of pistons under various stationary and nonstationary operation modes of engines is provided. It is noted that the temperature state of the D-245 diesel pistons has a higher level of heat stress compared to the D-240 diesel pistons. The maximum amplitude of low-frequency temperature fluctuations at the edge of the combustion chamber and their radial differences along the piston bottom are determined, depending on the parameters of thermal loading cycles. It is noted that the most dangerous modes of diesel operation, in terms of the destruction of the edge of the combustion chamber, are sharply changing modes (eg.: theloading unloading mode). \u0000CONCLUSIONS: It is proposed to increase the fuel injection advance angle in the thermal loading cycle in order to conduct accelerated comparative tests of piston variants for thermal resistance. The developed thermal loading cycle, in which the total duration of the load increase is 180 s and the total duration of the load decrease is 90 s, can be recommended for accelerated motor tests of pistons for thermal cycling resistance. The obtained temperature measurement data is recommended to clarify boundary conditions of the first kind when calculating the piston using the FEM method.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"215 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123038807","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Justification of the design parameters of the blade of the rotary working body of the solid fertilizer spreader","authors":"Anatoly A. Shvarts, I. V. Korotkov","doi":"10.17816/0321-4443-105128","DOIUrl":"https://doi.org/10.17816/0321-4443-105128","url":null,"abstract":"BACKGROUND: Organic, mineral and organomineral fertilizers in both granular and powder form are used in agricultural production in order to increase of soil fertility significantly, as well as to replenish soil reserves of micro-, meso- and macroelements. For fertilizer screening on a surface of a field, agricultural producers use machines with centrifugal-type working bodies which have horizontal or vertical rotation axis. In pursuance of the task of reducing the shift time consumption, a number of researchers find it reasonable to use a low-frame design of the machine to make direct loading of it from the dump truck body possible. For machines, having such design, rotary spreading working bodies with blades on a horizontal rotation axis are the most suitable. \u0000AIMS: The article is concerned with the justification of the design parameters of the blades of the rotary spreading working body of the low-frame body spreader of solid mineral and organomineral fertilizers. \u0000METHODS: The length of the working surface of the rotor blade with a horizontal rotation axis is justified theoretically for the most uniform distribution of solid fertilizers. An example of calculating the length of the blade of such a device based on the previously established overall dimensions of the spreader is given. \u0000RESULTS: On the basis of experimental data, the expediency of using trough-shaped blades with a length of 110 mm was confirmed. The most effective design parameters of the dimensions of the rotor blades for screening fertilizers were established, taking into account the reduction of possible options for fertilizer granules crushing by means of preventing their recirculation inside the rotor casing. The relevance of research of devices with rotary working bodies on horizontal axes of rotation is argued. \u0000CONCLUSIONS: Possible prospects for future research and the possibility of further improvement of the low-frame granular fertilizer spreader are proposed.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"41 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122153587","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Modernization of the granular materials dryer","authors":"T. A. Altukhova, S. Altukhov, S. Shukhanov","doi":"10.17816/0321-4443-100577","DOIUrl":"https://doi.org/10.17816/0321-4443-100577","url":null,"abstract":"BACKGROUND: The solving of priority tasks for the development of the agro-industrial complex considers the creation of advanced scientific developments. Innovative research of technical means and technologies of mechanization of agricultural production is not an exception in this regard. In the agricultural sector of Russia, crop production occupies a key place, in which the cultivation of grain crops is a priority. In the whole range of operations in the production of grain, the most important part of it is post-harvest processing of grain. One of the main stages in the post-harvest processing of grain is drying, in which the raw materials are brought to the moisture regain (down to 14%). Proper preparation of grain for storage ensures its reliable safety. \u0000AIMS: Modernization of the granular materials dryer by means of new technical solution at the level of patentability. \u0000METHODS: Research of the state of the issue on the topic under consideration with the help of a review of literary sources. Patent search for technical devices of grain dryers. Studying the principle of their functioning and design features. Analysis and generalization of the material for the adoption of a new design solution. \u0000RESULTS: The use of innovative technologies with the new generation harvesters, characterized by high productivity, has significantly reduced the duration of harvesting, and this, in turn, has significantly aroused the interest in drying. The use of dryers with improved quality indicators of functioning significantly reduces the time for preparing raw materials for long-term storage, reduces grain losses in the field during harvesting, and, in addition, makes it possible to carry out the process of transferring grain from the field to a special long-term storage warehouse in the shortest possible time and with the least losses. There are various ways of drying granular materials. These are main methods based on increasing the temperature of the processed material. Drying of grain with the help of heated air has become the most widespread. \u0000CONCLUSIONS: As a result of the conducted research, the drawbacks of existing technical devices for granular materials drying, as well as the principles of their functioning, have been revealed. A detailed analysis of literary sources, including a patent search, made it possible to upgrade the processed raw materials dryer, characterized by a simple and reliable design.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128248228","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Optimization of the main parameters of the diesel engine during its operation on the multicomponent biofuel composition","authors":"S. Plotnikov, A. N. Kartashevich, M. Simonov, Alexandr I. Shipin","doi":"10.17816/0321-4443-106567","DOIUrl":"https://doi.org/10.17816/0321-4443-106567","url":null,"abstract":"BACKGROUND: When conducting experimental studies aimed at finding optimal parameters of the diesel engine operating mode, as well as other objects, the issue of reducing the volume of the experiment becomes acute. The use of modern methods of planning, obtaining, processing and analyzing experimental data allows to reduce significantly the number of experiments conducted without notable loss of the reliability of the data obtained. \u0000AIMS: The aim of this study is to determine the optimal operating characteristics of the diesel engine, which uses the multi-component bio-fuel composition. \u0000METHODS: In order to determine the optimal values of the main parameters, affecting the effective indicators of the 4ChN 11.0/12.5 diesel engine when operating on the multicomponent biofuel composition and a mathematical description of their relationship, a second-order three-factor Box Benken plan was implemented. These factors are effective load, crankshaft rotational speed, and fuel injection advance angle. The diesel engine operation studies were performed on the most stable mixture of the multicomponent biofuel composition, including the following ingredients, wt %: rapeseed oil 34.5; ethanol 31.0; diesel fuel 34.5. The search of a compromise solution for the optimal combination of the levels of studied factors was performed with the method of superimposing of bidimensional sections of the response surfaces of the effective efficiency factor and the specific effective fuel consumption. \u0000RESULTS: Adequate models of second-order regression analysis of changes in effective efficiency factor and specific effective fuel consumption have been obtained. The factor space is described and grapho-analytical studies are carried out. The analysis of regression models and bidimensional sections of response surfaces allowed to determine the optimal values of the studied factors. The method for determining the optimal load and speed ranges of the diesel engine operation, using the multicomponent biofuel composition, has been optimized due to the application of the experimental plan and the description of the factor space by mathematical models, while number of experiments was reduced. \u0000CONCLUSIONS: The optimal area of the combination of the factors is in the range of varying the rotational speed of the diesel engine crankshaft n=1400...1550 rpm and the effective load Pe=0.68...0.85 MPa at the fuel injection advance angle Ѳinj=23.5 degrees to TDC. Considering the variable nature of the load and speed modes of a diesel engine in a real operation environment, the obtained data are of practical interest.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125208902","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Results of the simulation of tracked vehicles ride considering the interaction with a deformable road","authors":"S. Nosov, Nicholay E. Peregudov","doi":"10.17816/0321-4443-106446","DOIUrl":"https://doi.org/10.17816/0321-4443-106446","url":null,"abstract":"BACKGROUND: Tracked vehicles motion on a deformable road, which can be, for instance, cross-country terrain or field of various agricultural plants, is defined with various indicators. Depending on environment conditions, road surface properties etc., some of these indicators are chosen as main criteria of vehicles operational and technical performance assessment. Search of optimal parameters and operation modes of tracked vehicles demands using numerical modelling of considered processes. \u0000AIMS: Using imitational modelling, to obtain visual representation of influence of path unevenness, path microprofile, tracked vehicle velocity, its layout, nature of relation between particular unit assemblies, systems and their properties, physical and mechanical road properties regarding rheological approach to determination of them, state parameters of road material on change of tracked vehicles ride comfort indicators. \u0000METHODS: Results of simulation of ride comfort indicators for various tracked vehicles, obtained with the known earlier mathematical model, which considers design and technological properties of them as well as road surface state parameters, presented as physical and mechanical properties, based on a well-known rheological approach, are presented in the article. Agricultural tractors of different mass and the S-300 anti-aircraft missile systems, based on the 832M tracked chassis, are considered as tracked vehicles. \u0000RESULTS: Analysis of obtained relations, based on use of imitational modelling, revealed a set of patterns of tracked vehicles ride comfort indicators changing. It is defined that consideration of rheological characteristics and state parameters of a soil layer helps to improve simulation accuracy significantly. The obtained data shows the influence of velocity, mass and base length of tracked vehicles, offset of pressure center of caterpillar mover and other design parameters on growth of vertical and longitudinal-angular oscillations. \u0000CONCLUSIONS: The conducted study contributes to optimal development of tracked vehicles and assembling of different machine-tractor units, performing demanded technological operations in different conditions with specific road surface state parameters.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116952603","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Combing the standing crops with preliminary separation of loose grains","authors":"V. Ozhereliev, V. V. Nikitin, Natalia V. Sinyaya, Michael Y. Chaplygin, Tatyana O. Fedina","doi":"10.17816/0321-4443-100849","DOIUrl":"https://doi.org/10.17816/0321-4443-100849","url":null,"abstract":"SUBJECT OF THE STUDY: Is the process of preliminary separation of loose grains from combed grain heap on the slatted bottom of the feed elevator of a combine harvester. \u0000AIMS: Is an efficiency evaluation of the combed grain heap separation on the slatted bottom of the inclined chamber of a combine harvester in the field and to compare the degree of crushing of free grain depending on its supply to the threshing device or directly to the cleaning system. \u0000METHODS: All studies were carried out on winter wheat of the Moskovskaya 56 variety with a yield of 30 c/ha. Plant height varied within 0,60,9 m with a grain ripeness of at least 98% and a moisture content of 14%. The serial grain header ZHO-5 OZON manufactured by PJSC Penzmash was aggregated by the Niva-Effect combine harvester with a constant speed of 8 km/h and a stripping cylinder speed of 485 min-1. The field experiments were divided into two stages. The first series of experiments was devoted to evaluating the efficiency of preliminary separation of combed grain heap on the slatted bottom of the experimental feed elevator. During the second series of the experiment, grain was harvested with a serial feed elevator without its preliminary separation. \u0000RESULTS: According to the results of the first series of studies, it was found that the passage of loose grain through the holes of the slatted bottom of the inclined chamber is 91,6%. At the same time, grain crushing in the feed elevator did not exceed 0,5%, and in the bunker 1,75%. During the operation of the combine with a serial feed elevator without preliminary separation of the combed grain heap, the crushing of the bun-ker grain was within 5,25%. \u0000CONCLUSION: The practical implementation of such a technical solution makes it possible to 3 times the grain crushing in a bunker by the working bodies of the threshing machine.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"87 4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123174519","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"About the possibility of using natural gas as a fuel on agricultural tractors","authors":"A. R. Kulchitskiy","doi":"10.17816/0321-4443-96419","DOIUrl":"https://doi.org/10.17816/0321-4443-96419","url":null,"abstract":"AIMS: Evaluation of the effectiveness of converting diesel engines used in agricultural self-propelled vehicles to fully or partially natural gas (methane) fueled engines. \u0000METHOD: Is analytical. \u0000RESULTS: In agriculture up to 25% of operating expenses are fuel costs. However, the only number of the concomitant objective and subjective factors allow us to estimate expedience and efficiency of converting diesel engines used in agricultural self-propelled vehicles for full or partial supply of natural gas (methane). On the one hand, the price of an equivalent amount (in terms of work performance) of natural gas is more than 2 times lower than the price of diesel fuel. At the same time, natural gas is the most environmentally friendly hydrocar-bon fuel. But, on the other hand, the underdeveloped refueling infrastructure is obvious, and the environmental friendliness of natural gas itself is not a guarantee of the environmental friendliness of the engine itself. Also, the safety of gas equipment operation under high pressure is an important matter. \u0000CONCLUSIONS: Firstly, the use of natural gas instead of diesel fuel requires taking into account the difference in the physicochemical characteristics of these fuels, which determines both the requirements for the organization of the working process and the advantages and disadvantages of such replacement. Secondly, the combustion process of natural gas, compared to diesel fuel, is characterized by in-creased formation of water leading to more intensive watering of lubricating oil, although it re-duces carbon dioxide emission into the atmosphere. Safety of natural gas equipment operation plays an important role, and first of all, it is concern of cylinders that are filled at pressure of 20.025.0 MPa.","PeriodicalId":136662,"journal":{"name":"Traktory i sel hozmashiny","volume":"170 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133031001","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}