Linlin Chen, Ziqiang Wang, Chen Jia, Fule Li, Wenhan Hao, Bin Xiao, Chun Zhang, Zhihua Wang
{"title":"A RF remote-control transceiver with zero-standby power based on RFID technology","authors":"Linlin Chen, Ziqiang Wang, Chen Jia, Fule Li, Wenhan Hao, Bin Xiao, Chun Zhang, Zhihua Wang","doi":"10.1109/PRIMEASIA.2010.5604917","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604917","url":null,"abstract":"A zero standby power remote control system used for household appliances is presented in this paper. The system consists of two parts. One is transmitting unit and power amplifier which send RF modulated signal. The other is receiving unit and power management block which recover energy, demodulate the RF signal and control the power switch of the household appliances. Both transmit and receive ends only work during switching process so that the whole system has zero standby power consumption. The chip in transmitting unit is fabricated in 0.18um CMOS technology and occupies a core area of 0.47mm2. It works around 915MHz and has a max output power of OdBm. The total working power consumption of the chip is 16.45mW. The energy recovery block and ASK demodulation block in the receiving unit are verified.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"88 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117161196","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Low-cost RFID authentication under the EPCglobal framework","authors":"Hung-Lin Li, Chien-Chang Lai, Ying-Liang Chen, Yu-Jung Huang","doi":"10.1109/PRIMEASIA.2010.5604913","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604913","url":null,"abstract":"In this paper, we study the RFID tag-reader mutual authentication scheme. A hardware design of an RFID authentication protocol conforming to EPC Class 1 Generation 2 Standards is proposed. The proposed RFID tag-reader mutual authentication protocol was simulated using Modelsim XE II and synthesized using Altera's Quartus II software. The system has been successfully verified in hardware using an Altera DE2 board that included an Altera Cyclone II Field Programmable Gate Array (FPGA).","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126713873","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"FEM-based thermal analysis of IGBT","authors":"Jian Zhang, Changzhi Lu, Xiaoling Zhang, Yueqiang Huang, Xianlei Meng","doi":"10.1109/PRIMEASIA.2010.5604896","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604896","url":null,"abstract":"A novel 3-D IGBT thermal model is implemented. The temperature distribution in different conditions was analyzed by using finite element thermal analysis software ANSYS. Simulation results under the conditions of different heat source spacing, respectively 5μm, 10μm and 15μm, show that increasing the heat source spacing appropriately can reduce the thermal coupling effect, thereby reducing the peak temperature of IGBT. Temperature dependent thermal conductivity of Si was considered during simulation, the results indicate the peak temperature rise 4.8K in the same power. The results of thermal resistance obtained by simulation are in agreement with the measured value.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116088849","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Variable Bitline Data Cache for low power design","authors":"Jiongyao Ye, Takahiro Watanabe","doi":"10.1109/PRIMEASIA.2010.5604932","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604932","url":null,"abstract":"Reducing the power consumption is one of the most important design problems at present. Modern microprocessors employ caches to bridge the great speed variance between the main memory and the central processing unit, but these caches propose larger and larger proportion in the total power consumption. In fact, many values rarely need the full-bit dynamic range supported by a cache. The Narrow-Width Value (NWV) occupies a large portion of cache access and storage. It is unreasonable that the storage space for value of any data width is the same in the cache, even if NWV needs only a few bits to be stored. This paper proposes a Variable Bitline Data Cache (VBDC) which exploits the popularity of NWV stored in the cache. In VBDC design, the cache data array is divided into several sub-arrays to adapt each data pattern with the different bitline length to access. The VBDC can shut off the corresponding unused high arrays to reduce its dynamic and static power consumption. The VBDC achieves low power consumption through reducing the bitline length. Experimental results employing SPEC 2000 benchmarks show that our proposed VBDC can reduce both the dynamic power consumption ant the static power consumption by 44.75% and 42.86%.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"58 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116437635","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of wireless power supply microsystem for capsule endoscope","authors":"S. Yao, Lei Wang, Jinyong Zhang, Xiaofeng Gu","doi":"10.1109/PRIMEASIA.2010.5604973","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604973","url":null,"abstract":"A novel wireless powering solution for active capsule endoscope has been presented in this paper. The self-resonant coil inside the human body is used to receive energy, and the energy is rectified and regulated to generate a stable voltage for charging a button battery, which provides stable power for controlling and driving the system by the low dropout (LDO) regulator fixed in the capsule endoscope. The charging microsystem is designed using a 0.18 μm CMOS high voltage process. Simulation results indicate that the rectifier conversion efficiency of voltage and power is about 82.14% and 83.50%, respectively. The regulator and LDO provide relatively constant output voltage in spite of the variations of input voltage and loading current. The design of power management integrated circuits meets the requirement for controlling the charging-recharging of the battery and providing stable voltage for the control and drive system of the capsule endoscope.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128622230","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An improved neutral-point-potential balance control strategy for three-level PWM rectifier","authors":"Zhu Rong-wu, Wu Xiao-jie, Jiang Xiao-yan, D. Peng","doi":"10.1109/PRIMEASIA.2010.5604978","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604978","url":null,"abstract":"Neutral point potential balance control is very important to three-level neutral-point-clamped (NPC) rectifiers. In this paper, the balance control strategy is studied with three-level space vector pulse width modulation (SVPWM) algorithm based on reference voltage decomposition. An improved neutral-point potential balance control strategy based on balance factor is proposed and the principle is analyzed. Simulation and experimental results verify the validity of the control strategy.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123654084","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The arithmetic of tracking before detecting of dim infrared targets based on particle filter","authors":"Qing Ji, Yang Yang","doi":"10.1109/PRIMEASIA.2010.5604918","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604918","url":null,"abstract":"Aiming at the detecting and tracking of the moving dim target with low SNR, this paper puts forward a new arithmetic of tracking before detecting based on particle filter (TBD-PF). The arithmetic proceeds background suppression with mathematical morphology filter firstly, and then estimates the state of the target using the arithmetic of particle filter. A threshold value is set when sampling newborn particles in the processing of tracking, and it not only improves the quality of particles but also reduces computation cost. The method of the hypothetic test of likelihood ratio is used to decide whether the target exists in the processing of detection. Finally, we obtain the track and detecting probability of the target. The excellent detecting capability and tracking precision of this presented arithmetic are well verified by the results of the simulation which utilizes the realistic infrared images with different SNR.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"126 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128077348","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Low power communication security design for RFID applications","authors":"Ying-Liang Chen, Chien-Chang Lai, Yeng-Chang Huang, Yu-Jung Huang","doi":"10.1109/PRIMEASIA.2010.5604914","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604914","url":null,"abstract":"This article mainly focuses on the application of AES in the radio frequency identification technology. The AES circuit module integrates into radio frequency identification module to increase system front-end identification mechanism. The power analysis at different modes is performed in this work. The concept of data security warning mechanism for RFID tag is demonstrated. The process of the authentication procedure for the integration of the radio frequency identification system and AES is illustrated. The functionality of the proposed system is verified by the simulation results.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125724667","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An efficient motion estimation algorithm for frame rate conversion","authors":"Jingjing Zhao, Eryan Yang, Daojin Liu","doi":"10.1109/PRIMEASIA.2010.5604953","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604953","url":null,"abstract":"In this paper, we propose a low-complexity motion estimation algorithm for frame rate conversion. Insteading of using sum of absolute difference (SAD) calculation, the algorithm adaptively uses simple comparison operation in different hierarchical motion estimation level to achieve good image quality and fast processing capability. Experiments are carried out on applying this algorithm for frame rate conversion and subjective and objective comparison results demonstrate the proposed algorithm is a good candidate for estimating the motion in complex frame rate up-conversion module.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115855341","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A low-power 8-read 4-write register file design","authors":"Hao Yan, Yan Liu, Dong-hui Wang, Chao-Huan Hou","doi":"10.1109/PRIMEASIA.2010.5604933","DOIUrl":"https://doi.org/10.1109/PRIMEASIA.2010.5604933","url":null,"abstract":"This paper gives a study of leakage in 90nm logic CMOS technology, and by analyzing the power constitutions in multi-ported register files and the leakage in different nMOS transistors with different power supply, a low-swing strategy for bit lines is used in saving power. In this paper an 8 read / 4 write ports write-through register file is designed and it dissipates 10.04mW at 500MHz, which save 33.36% power in read operation and 24.8% energy in average. The leakage power on the bit lines also reduces 1.7% by using high threshold voltage transistors in low-swing scheme.","PeriodicalId":136555,"journal":{"name":"2010 Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia)","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131428193","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}