K. Ilves, Franz Taffner, S. Norrga, A. Antonopoulos, L. Harnefors, H. Nee
{"title":"A submodule implementation for parallel connection of capacitors in modular multilevel converters","authors":"K. Ilves, Franz Taffner, S. Norrga, A. Antonopoulos, L. Harnefors, H. Nee","doi":"10.1109/TPEL.2014.2345460","DOIUrl":"https://doi.org/10.1109/TPEL.2014.2345460","url":null,"abstract":"The modular multilevel converter is a suitable converter topology for high-voltage high-power applications and consists of series-connected submodules. Typically, these submodules are half-bridges with dc capacitors. A voltage ripple in the submodule capacitors is inevitable due to the current flowing in the arms. The converter should therefore be controlled in such a way that the capacitor voltages are kept balanced and close to their nominal values over time. This paper presents a new submodule circuit which alleviates the balancing of the capacitor voltages. The proposed submodule circuit consists of two capacitors and eight switches, forming a three-level submodule. Ideally, the voltage and current rating of the switches can be chosen such that the combined power rating of the semiconductors is the same as for equivalent half-bridge submodules. The proposed submodule circuit provides the possibility of connecting the two capacitors in parallel when the intermediate voltage level is used. This will reduce the capacitor voltage ripple, especially at low switching frequencies and thus allow for a reduction of the size, weight, and cost of the submodule capacitors. The proposed submodule circuit is validated by both simulation results and experiments on a laboratory prototype. It is found that the parallel connection of the submodule capacitors will, in fact, significantly improve the balancing of the capacitor voltages.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"170 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121560397","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Robust motion-tracking control for multilateral systems","authors":"Ayaka Matsui, K. Miura, S. Katsura","doi":"10.1109/EPE.2013.6634384","DOIUrl":"https://doi.org/10.1109/EPE.2013.6634384","url":null,"abstract":"This paper proposes a robust motion-tracking control for multilateral systems. The multilateral systems have been proposed as the system of acquiring and transmitting the haptic information between some systems. In the multilateral systems which this paper addresses, the operator manipulates one master robot and some slave robots work toward objects as following the operator's motion. Since the operator can work toward some objects at one time, this system leads to better productivity. In the conventional method, however, the reproduced motion is different from the operator's motion when something inputs an unexpected force into the system. As a result, the conventional system may cause the destruction of the objects. This research aims to improve the performance of slave robots and to reproduce the operator's motion accurately in real time. By using the proposed method, the risk of destroying the objects are decreased. The validity of the proposed method is confirmed through the experiments.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-12-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133349173","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ewan M. Farr, R. Feldman, A. Watson, J. Clare, P. Wheeler
{"title":"A sub-module capacitor voltage balancing scheme for the Alternate Arm Converter (AAC)","authors":"Ewan M. Farr, R. Feldman, A. Watson, J. Clare, P. Wheeler","doi":"10.1109/EPE.2013.6634456","DOIUrl":"https://doi.org/10.1109/EPE.2013.6634456","url":null,"abstract":"A per-phase sub-module capacitor voltage balancing scheme for the Alternate Arm Converter (AAC) is proposed. Leg balancing regulates the sum of sub-module capacitor voltages in a leg to its set-point. Arm balancing regulates each sub-module capacitor voltage to the nominal sub-module capacitor voltage. Additional converter control requirements and the modulation scheme are also discussed. The control and modulation scheme has been verified by simulation. The leg balancing control loop was designed to be critically damped to primarily limit oscillations in the output variable caused by changes in AC-side power demands; the simulation results indicated this specification was met.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"159 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115264417","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Frequency domain evaluation of a traction PMSM drive with direct torque control including field weakening area","authors":"T. Glasberger, M. Janda, Z. Peroutka","doi":"10.1109/EPE.2013.6634472","DOIUrl":"https://doi.org/10.1109/EPE.2013.6634472","url":null,"abstract":"This paper presents a method for frequency analysis of traction drives supplied from a dc trolley wire with an input LC filter. The proposed method is suitable for frequency analysis of the traction drive in whole speed range and enables to find resonant or other observed harmonics in the operating drive circuit which could cause dangerous oscillations particularly at resonant frequencies of the power circuit. The method is used for detailed frequency analysis of a direct torque controlled traction drive with a surface mounted permanent magnet synchronous motor. The analysis is performed in a wide speed range including field weakening area and the dangerous resonant frequency is found and the behaviour of the drive in dependence on the stator frequency is observed. A solution based on demanded machine torque correction is used for the drive stability enhancement. The behaviour of the drive with this improvement is evaluated with the proposed method as well. The proper function of the frequency analysis in the wide speed range for the non-stabilized and stabilized drive is verified by simulations as well as by experimental measurements on a down scaled traction drive with rated power of 10.7 kW.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124432783","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Paul L. Evans, A. Castellazzi, S. Bozhko, C. M. Johnson
{"title":"Automatic design optimisation for power electronics modules based on rapid dynamic thermal analysis","authors":"Paul L. Evans, A. Castellazzi, S. Bozhko, C. M. Johnson","doi":"10.1109/EPE.2013.6634661","DOIUrl":"https://doi.org/10.1109/EPE.2013.6634661","url":null,"abstract":"A novel approach is presented that shows how mathematical optimisation algorithms can be applied to optimise multi-chip power electronic modules based on their dynamic thermal performance. By using Model Order Reduction techniques which allow rapid dynamic thermal simulation and evaluation of potential designs, even optimisation algorithms that require a large number of design evaluations can be used to determine theoretical optimum designs within realistic time-scales on a standard desktop PC. The optimisation approach has been integrated into prototype power electronics design software under development and an overview of this software is first given. The optimisation approach is then demonstrated by means of two simple multichip power module examples.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"133 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117120418","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimization of the passive thermal control system of a lithium-ion battery with heat pipes embedded in an aluminum plate","authors":"K. Murashko, J. Pyrhonen, L. Laurila","doi":"10.1109/EPE.2013.6631856","DOIUrl":"https://doi.org/10.1109/EPE.2013.6631856","url":null,"abstract":"In the design and operation of batteries, effective heat transfer and protection against high operation temperatures are significant issues affecting the lifetime of the battery. This is particularly the case for batteries intended for hybrid machines, where the peak power and current requirements are high. This paper introduces a structure of the thermal protection system for the high-power lithium-ion batteries to be applied to hybrid machines and a methodology for their optimization. The proposed structure is based on the use of metal plates and heat pipes, providing an opportunity to decrease the nonuniform temperature distribution in pouch-type cells. The efficiency of the proposed thermal control system is verified by modeling in Comsol Multiphysics, which is connected to MATLAB for the optimization of the placement and number of heat pipes. Multidimensional unconstrained nonlinear minimization is applied during the optimization in MATLAB.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"79 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117133744","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Fail-safe modular control platform for power electronic applications in R&D environments","authors":"N. Cherix, S. Delalay, P. Barrade, A. Rufer","doi":"10.1109/EPE.2013.6634428","DOIUrl":"https://doi.org/10.1109/EPE.2013.6634428","url":null,"abstract":"This paper presents a modular control platform which is tailored for teaching and research applications. It aims at being entirely “student-proof” and features software-independent safety mechanisms, extensive signal conditioning and easy-to-use interfaces, dedicated to power electronics. A practical example with various HIL simulation results illustrates the attractiveness of the presented platform.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121256623","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Modelling and simulation of hybrid electric ships with DC distribution systems","authors":"B. Zahedi, L. Norum","doi":"10.1109/EPE.2013.6631762","DOIUrl":"https://doi.org/10.1109/EPE.2013.6631762","url":null,"abstract":"DC power system in ship applications is an emerging technology, which provides new opportunities for reducing fuel consumption and emission. However, the resulted power electronic-based system onboard the ship requires effective analysis tools to facilitate a full-realization of the advantages. This paper reviews the modelling of hybrid electric ship components including mechanical and electrical elements. Power electronic converters are modeled by nonlinear averaging methods to suit system-level studies. A unified model for bidirectional converters is proposed to avoid transitions between two separate models. A simulation platform using the derived models is developed for system-level analysis of hybrid electric ships. Simulation results of a hybrid electric ship with two diesel generators, a fuel cell, and an energy storage module are presented for different modes of operation.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125122057","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Zijian Xiao, L. Kerachev, M. Cousineau, J. Crebier, E. Sarraute, T. Meynard, Y. Lembeye
{"title":"Concept and design of hybrid interleaved and isolated micro-converter for low power applications","authors":"Zijian Xiao, L. Kerachev, M. Cousineau, J. Crebier, E. Sarraute, T. Meynard, Y. Lembeye","doi":"10.1109/EPE.2013.6631871","DOIUrl":"https://doi.org/10.1109/EPE.2013.6631871","url":null,"abstract":"In this paper, a hybrid interleaved and isolated micro-converter (5V/2A/1MHz) dedicated to low power conversion is presented. In order to be able to address a lot of different applications, its structure is isolated (implementation of a planar coupler) and uses interleaved parallel legs with coupled inductors (lowering internal losses). For very high integration purpose, two chips have been done: one dedicated to the control of the switching-cells and the other implementing the drivers and the power switches. The control part implements an original modular approach dedicated to provide the interleaved carriers and to guaranty the current balancing. The power part discusses the layout constraints to optimize the power density.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125937786","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimal LCL filter design for 3-phase Space Vector PWM rectifiers on variable frequency aircraft power system","authors":"Lei Shen, G. Asher, P. Wheeler, S. Bozhko","doi":"10.1109/EPE.2013.6631911","DOIUrl":"https://doi.org/10.1109/EPE.2013.6631911","url":null,"abstract":"Regulations restrict the harmonics permitted on civil aircraft electrical power supplies. However, the More Electric Aircraft (MEA) will see a significant increase in high switching frequency power electronic conversion which may include 3-phase active PWM rectifiers. This paper describes an optimal LCL filter design method for 3-phase 2-level active rectifiers affixed to a variable frequency grid. The current harmonics for both synchronous and asynchronous Space Vector PWM are analytically calculated. A search method is used to find the optimal filter solution to meet the RTCA DO-160E harmonic specifications for variable grid frequency from 360Hz to 800Hz.","PeriodicalId":134379,"journal":{"name":"2013 15th European Conference on Power Electronics and Applications (EPE)","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2013-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126860054","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}