{"title":"Optimization of SMT-systems by computer-aided planning, simulation and monitoring","authors":"K. Feldmann, J. Franke, B. Zollner","doi":"10.1109/IEMT8.1990.171094","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171094","url":null,"abstract":"At the University of Erlangen-Nuremburg a complete SMT line has been built in a model factory in order to ensure research work and education. With the aid of developed programs, computer-integrated SMT production can be demonstrated, from planning to the diagnosis of processes. In the planning stage the SMT line can be modeled on CAD systems, and the planned processes can be simulated. Line layout, buffer dimensions, and the machine setup of the several mounting devices can be optimized. The control programs for the mounting device which are generated and tested in the planning phase are transferred to the shop floor by the computer-integrated network. The running production programs are supported by a new monitoring concept. By means of the monitoring system, the operator can detect and remove failures much faster and more effectively.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"26 Pt 5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115373114","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Measurement of stress and temperature distribution in large area dies","authors":"J. Lanchbery, G. Shorthouse","doi":"10.1109/IEMT8.1990.171057","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171057","url":null,"abstract":"A method for the measurement of strain and temperature distribution in mounted silicon chips has been developed and successfully demonstrated. Generally, the results obtained confirmed predictions qualitatively but quantitatively showed considerable variance with theoretical models. The stress induced in dies as a result of epoxy bonding is typically a factor of 5 lower than predicted. The stress induced in solder-bonded dies is minimal. In general, the degree of stress induced in chips is proportional to the thermal expansion coefficient of the substrate, but the mechanical compliance, thickness, and homogeneity of the die bonding material are also of critical importance. The temperature distribution in locally heated silicon mounted on different substrate types is dependent upon heat dissipation, the proximity of the heat source, the efficiency of the thermal conduction route from the dies, and the thermal conductivity of the substrate. The results demonstrate the inadequacy of current modeling methods and the need for direct measurement of strain and temperature in VLSI die bonding and thermal assessment.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126145854","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Takahashi, A. Nagai, A. Mukoh, M. Wajima, K. Tsukanishi
{"title":"Low dielectric material for multilayer printed wiring boards","authors":"A. Takahashi, A. Nagai, A. Mukoh, M. Wajima, K. Tsukanishi","doi":"10.1109/33.62560","DOIUrl":"https://doi.org/10.1109/33.62560","url":null,"abstract":"A low-dielectric material for high-speed digital multilayer printed wiring boards (MPBs), maleimide-styryl (MS) resin, was developed by reacting styryl prepolymer with ether-type bismaleimide. Since MS resin has good processabilities, prepregs and copper clad laminates can be made under conventional conditions used for epoxy and polyimide laminates. The laminates are characterized by their excellent heat-resistant properties, which are almost the same as those of polyimide laminates, and low moisture absorption, which is the same as that of epoxy laminates. The laminates comprising the MS resin and several reinforcements have low dielectric constants, ranging from 3.3 to 3.7. Using the laminates, a high-density MPB with 62 printed wiring layers was made.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"153 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122542995","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Solder pastes tackiness: the influences of the process atmosphere and of the test method","authors":"B. Guillaume, J. Guinet, J. Hubert","doi":"10.1109/IEMT8.1990.171060","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171060","url":null,"abstract":"During the assembly of surface-mounted devices, a storage time may exist between screen printing and infrared reflow. For this reason, solder pastes have been characterized by their tackiness. Results given by two methods of tackiness measurement are presented in order to choose the more appropriate method for the present application. Tackiness evolution was observed during the storage of screen-printed circuits for different atmospheric compositions. A correlation between the pastes' tackiness and the intrinsic characteristics of their vehicles has been established. It is shown that the tack time is improved by storage of the screen-printed circuits in a dry atmosphere.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130494997","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Y. Sorimachi, K. Honda, I. Tusbata, Y. Ichinose, S. Miyauchi
{"title":"Structural and electrical properties of iron-silicide thin film resistor deposited by cosputtering","authors":"Y. Sorimachi, K. Honda, I. Tusbata, Y. Ichinose, S. Miyauchi","doi":"10.1109/IEMT8.1990.171046","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171046","url":null,"abstract":"The sheet resistance, TCR, thermoelectric power, and frequency characteristics of cosputtered iron-silicide thin film are examined. The values of sheet resistance and TCR for 1000-AA thick films are 20 Omega to 30 Omega and +200 to -4000 ppm/ degrees C, respectively, depending on composition in the range of 48 to 68 at.% Si. In particular, zero TCR film is formed at the composition of 54 at.% Si, and the film structure is considered to consist of FeSi and FeSi/sub 2/, which have positive and negative TCR, respectively.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126787303","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A tunable over controlled oscillator for space application based on a thick film hermetic hybrid","authors":"F. Revel, M. Monichino","doi":"10.1109/IEMT8.1990.171066","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171066","url":null,"abstract":"The design and manufacturing aspects of a tunable oven-controlled oscillator based on a thick-film hermetic hybrid are described. The goals to be achieved were volume reduction, weight reduction, power consumption reduction, keeping costs reasonable, flexibility for several applications, and ease of tuning at the frequencies of 5-10 MHz. A volume reduction of 80%, a weight reduction of 50%, and a power consumption reduction of 10%-20% were achieved.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122359773","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A calibration technique in robotic assembly of hybrid circuits","authors":"J. Zupancic","doi":"10.1109/IEMT8.1990.171098","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171098","url":null,"abstract":"A calibration technique used in a robotic cell for surface mount component (SMC) placement with a SEIKO D-TRAN 2000 industrial robot is described. Two automatic processes are available in the calibration scheme proposed. Online teaching requires calibration of peripheral devices in robot working space. It is realized with a special sensor-based robot gripper for SMC handling. When offline programming of the robot cell is active, a numerical method improves relative robot accuracy over a limited critical working area. Computer-based automatic measurement equipment enables fast acquisition of large amounts of data. An iterative inverse kinematic algorithm for required position definition was constructed.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"76 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130227978","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The new soldering process ('clean soldering' with residueless flux)","authors":"I. Kawakatsu, K. Yokoi","doi":"10.1109/IEMT8.1990.171061","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171061","url":null,"abstract":"A novel soldering process named 'clean soldering' is described. It is a soldering process in an inert gas atmosphere with a specially composed residueless flux. This process does not require any washing and cleaning operation. It is suggested that it will contribute to the solution of the pollution problem of organic solvents. The products manufactured by this soldering process have sufficient insulation resistance, are suitable for high-density PCBAs (SMT), reduce the defects in soldered joints, prevent oxidation of solder baths, and are safe for the human body.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126763839","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Up date on cleanliness of electronic assemblies","authors":"J. Lépagnol","doi":"10.1109/IEMT8.1990.171044","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171044","url":null,"abstract":"Various issues connected with the cleanliness conditions and cleaning of electronic assemblies are addressed. Presoldering and soldering procedures are examined. The cleaning operation is described. Methods for the technical assessment of cleanliness are discussed. They consist of measuring ionic contamination and measuring surface insulation resistance. Typical levels of cleanliness obtained with various types of fluxes and cleaning processes are tabulated. The cost of cleaning is considered.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115150145","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Special capabilities of an optimized contact/proximity aligner for applications using DuPont Riston","authors":"C. Reyerse","doi":"10.1109/IEMT8.1990.171099","DOIUrl":"https://doi.org/10.1109/IEMT8.1990.171099","url":null,"abstract":"The author describes the essential elements of a mask aligner configured to meet the demands of the high-density microinterconnect (HDMI) market. Emphasis is placed on the specific requirements of DuPont Riston when used with multichip module substrates. Issues specific to use of Dupont Riston on typical HDMI substrates, as well as the specifications of the exposure tool, are addressed. A formula is presented which is used as a basis for optimizing the mask aligner to provide a complete aligner that will address the issues unique to HDMI. Factors considered are method of exposure, available intensity, method of handling, and optics.<<ETX>>","PeriodicalId":124416,"journal":{"name":"8th IEEE/CHMT International Conference on Electronic Manufacturing Technology Symposium","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1990-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115646113","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}