P. Fredes, U. Raff, E. Gramsch, J. Cuenca, J. Pascal
{"title":"Thermoelectric Control of Deep UV LED to Improve Optical Performance","authors":"P. Fredes, U. Raff, E. Gramsch, J. Cuenca, J. Pascal","doi":"10.5772/intechopen.85964","DOIUrl":"https://doi.org/10.5772/intechopen.85964","url":null,"abstract":"A thermoelectric control system using thermoelectric cooler devices (TEC) combined with an aluminum heat dissipater and a fan heat extractor allows improving considerably the optical performance of deep UV LEDs (285 nm) operating at desired temperatures. A proportional, integral, and differential controller (PID) control technique was implemented to control the voltage in the TEC devices, and therefore, the desired range of temperatures can be achieved. The PID parameters are obtained with computational simulations based on physical models and experimental data recordings of the temperature, using a thermistor sensor for the temperature measurements and SiC photodiode with UV enhanced system for the optical power measurements. The experimental data show that decreasing the temperature of the UV-C LED light source using a TEC increases the optical output power, while it has been shown that the lifetime of the LED devices can be improved.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123353088","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Introductory Chapter: Introduction to Advanced Thermoelectric Materials for Energy Harvesting Applications","authors":"S. Memon","doi":"10.5772/intechopen.89640","DOIUrl":"https://doi.org/10.5772/intechopen.89640","url":null,"abstract":"Advanced Thermoelectric Materials for Energy Harvesting Applications is a research-intensive textbook covering the fundamentals of thermoelectricity and the process of converting heat energy into electrical energy. It covers the design, implementation, and performance of existing and advanced thermoelectric materials. Chapters examine such topics as organic/inorganic thermoelectric materials, performance and behaviors of thermoelectric devices, and energy harvesting applications of thermoelectric devices.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128831315","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Organic Thermoelectrics and Thermoelectric Generators (TEGs)","authors":"L. Tzounis","doi":"10.5772/intechopen.86946","DOIUrl":"https://doi.org/10.5772/intechopen.86946","url":null,"abstract":"Inorganic and organic thermoelectric (TE) materials have received an extensive scientific interest during the last decades, due to their ability to directly convert the thermal energy to electricity. This is described by the well-known “ Seebeck effect ” . TE materials can convert also electricity into cooling through the “ Peltier effect ” . As such, TE materials and thermoelectric generator (TEG) devices can be utilized for potential applications including (i) thermal energy harvesting, (ii) local cooling and (iii) temperature sensing. The direct conversion of heat into electricity has been one of the most attractive solutions to the severe environmental and energy issues the humanity is coming across. This chapter covers the fundamental working principle of TE materials, the synthetic protocols for inorganic and organic thermoelectric materials, techniques and technologies for the fabrication of thermoelectric generators (otherwise defined as thermoelectric module devices) and a number of applications. Finally, future aspects and outlooks for further advancements at the “ material ” or “ device ” level for efficient power generation are remarked.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-09-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114772183","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Quantum Theory of the Seebeck Coefficient in YBCO","authors":"S. Fujita, A. Suzuki","doi":"10.5772/INTECHOPEN.86378","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.86378","url":null,"abstract":"The measured in-plane thermoelectric power (Seebeck coefficient) S ab in YBCO below the superconducting temperature T c ( (cid:1) 94 K) S ab is negative and T -independent. This is shown to arise from the fact that the “ electrons ” (minority carriers) having heavier mass contribute more to the thermoelectric power. The measured out-of-plane thermoelectric power S c rises linearly with the temperature T . This arises from moving bosonic pairons (Cooper pairs), the Bose-Einstein condensation (BEC) of which generates a supercurrent below T c . The center of mass of pairons moves as bosons. The resistivity ρ ab above T c has T -linear and T -quadratic components, the latter arising from the Cooper pairs being scattered by phonons.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-05-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121980148","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Harnessing the Automotive Waste Heat with Thermoelectric Modules Using Maximum Power Point Tracking Method","authors":"D. Gandini, M. Chiaberge, A. Nepote","doi":"10.5772/INTECHOPEN.86232","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.86232","url":null,"abstract":"The present work shows a comprehensive methodology and design steps to recover energy from the automotive waste heat. A thermoelectric generator must be connected to a power converter in order to extract the maximum power from the generator and, also, satisfy different constrains to charge a battery. Starting from the electrical model of thermoelectric cells, it is evaluated their combination to realize a thermoelectric generator (TEG) comply with the automotive regulation, then considering input/output electric characteristics, it is evaluated the best converter topology to satisfy all constrains. Design steps and power dissipation estimation are deeply explained. TEG and power converter models are simulated in a model-based environment to allow the design of the control algorithms. The control system consists of nested control loops. Two maximum power point tracking (MPPT) algorithms are evaluated. The MPPT output is used as reference for a current control loop. The maximum power characteristic of a TEG has a quadratic behavior and working without the tracking of the maximum power point could drastically decrease the generated power from the TEG and the system efficiency. There are presented simulation results of the control algorithms and experimental data are shown in order to validate the design steps.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-05-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126519988","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Luis Vitório Gulineli Fachini, Pedro Leineker Ochoski Machado, L. Krambeck, R. M. Szmoski, T. A. Alves
{"title":"Heat Recovery and Power Generation Using Thermoelectric Generator","authors":"Luis Vitório Gulineli Fachini, Pedro Leineker Ochoski Machado, L. Krambeck, R. M. Szmoski, T. A. Alves","doi":"10.5772/INTECHOPEN.85122","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.85122","url":null,"abstract":"In this chapter, experimental analysis of the direct conversion of thermal energy into electric energy was carried out, in order to encourage the conscious use of energy and to reduce waste. The conversion of thermal energy into electrical energy occurs in a thermoelectric generator through the Seebeck effect. This effect is associated with the appearance of an electric potential difference between two different materials, placed in contact at different temperatures. This relation between temperature and electrical properties of the material is known as thermoelectricity. This experimental study has as objective the obtaining of operating characteristic curves of the thermoelectric generator TEG1-12611-6.0, for different temperature gradients and under constant pressure between the heater plate and the heat sink. Resistors were used to heat the thermoelectric generator, which simulates the residual heat, and insulation material to minimize the dissipation of heat to the environment. For cooling, a heat exchanger was used in order to maximize the temperature difference between the sides of the thermoelectric generator. In this way, it was possible to perform an experimental analysis of the obtained electric power for different temperature ranges between the faces of the generator and, with this, verify the applicability in real systems.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"87 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-04-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121052145","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Bismuth Telluride Solubility Limit and Dopant Effects on the Electronic Properties of Lead Telluride","authors":"Dana Ben-Ayoun, Y. Gelbstein","doi":"10.5772/INTECHOPEN.84602","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.84602","url":null,"abstract":"The demand for energy efficiency has motivated many researchers to seek for novel methods capable of enhancing the conversion of heat to electricity. Most of the recently published methods for thermoelectric (TE) efficiency enhancement discuss on the reduction of the lattice thermal conductivity, with a minor focus on improved electronic optimization. This is attributed mainly to the fact that the electronic properties are correlated and opposing each other upon increasing the carrier concentration. It has been reported that the system of PbTe-BiTe has potentially high TE performance; this chapter is focused on a detailed investigation of the co-effect of bismuth as an effective electronic dopant and at the same time, as a second phase promoter in the PbTe matrix. (PbTe)x(BiTe)1−x alloys were thermoelectrically examined and the values were analyzed analytically by the general effective media (GEM) approach.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129897882","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Dell, Michael Petralia, Ashish Pokharel, Runar Unnthorsson
{"title":"Thermoelectric Generator Using Passive Cooling","authors":"R. Dell, Michael Petralia, Ashish Pokharel, Runar Unnthorsson","doi":"10.5772/INTECHOPEN.85559","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.85559","url":null,"abstract":"This chapter presents an analysis of a point-of-use thermoelectric generator that is patented by one of the authors. The design, implementation and performance of the generator for powering electronic monitoring devices and charging batteries is discussed. This passive generator has no moving parts and relies on ambient air cooling. In one iteration it produces 6.9 W of steady state power using six Laird thermoelectric modules (Laird PB23 Series, HT8, 12) when placed on a 160°C steam pipe with a 30°C ambient environment ( Δ T of 130°C). The generator produced 31.2 volts (V) open circuit and 0.89 amperes (A) short circuit. It successfully powered two microcontroller-based security cameras, one with a wireless Local Area Network (LAN) and another with cellular connectivity. In another scenario, the generator produced approximately 6 W with a steam pipe temperature of 140°C and an ambient of 25°C ( Δ T of 115°C). This second system powered LED lights, a cellular-interfaced video surveillance system, and monitoring robots, while simultaneously trickle charging batteries. A third installation totally powered a stand-alone 3G web security camera system.","PeriodicalId":124160,"journal":{"name":"Advanced Thermoelectric Materials for Energy Harvesting Applications","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114669721","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}