Journal of Theoretical, Computational and Applied Mechanics最新文献

筛选
英文 中文
Crack branching at low tip speeds: spilling the T 裂纹分支在低尖端速度:溢出T
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-08-31 DOI: 10.46298/jtcam.10172
E. Eid, R. Seghir, J. Réthoré
{"title":"Crack branching at low tip speeds: spilling the T","authors":"E. Eid, R. Seghir, J. Réthoré","doi":"10.46298/jtcam.10172","DOIUrl":"https://doi.org/10.46298/jtcam.10172","url":null,"abstract":"Using the criterion that a crack will extend along the direction of maximum circumferential stress, this paper demonstrates the influence of the coupling between the crack-parallel T-stress and the tip speed on the directional (in)stability of dynamics cracks in brittle materials, i.e., branching, turning, and limiting velocities. The proposed (in)stability criterion evolves within the theory of dynamic fracture: we build on the work of Ramulu and Kobayashi (1983) by introducing a reference distance ahead of the crack-tip to incorporate the contribution of the higher-order terms in the asymptotic solution of the elastic crack-tip fields. The theoretical aspect is first explored, a methodology to numerically (and experimentally) advocate the instability—as a co-action of T-stress and a fast-running crack—is then proposed and validated on Borden et al. (2012)’s branching benchmark. An experimental setup combining Ultra-High-Speed High-Resolution imaging with advanced Digital Image Correlation algorithms and a novel crack-branching inertial impact test enables for never-seen-before quantification of the rich dynamical behaviour of the fracture. This permits the experimental validation of the developed crack (in)stability criterion.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"225 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115557639","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
The average conformation tensor of inter-atomic bonds as an alternative state variable to the strain tensor: definition and first application ś the case of nanoelasticity 原子间键的平均构象张量作为应变张量的可选状态变量:纳米弹性的定义和首次应用
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-06-06 DOI: 10.46298/jtcam.7366
T. Desoyer
{"title":"The average conformation tensor of inter-atomic bonds as an alternative state variable to the strain tensor: definition and first application ś the case of nanoelasticity","authors":"T. Desoyer","doi":"10.46298/jtcam.7366","DOIUrl":"https://doi.org/10.46298/jtcam.7366","url":null,"abstract":"Most of the mechanical models for solid state materials are in a methodological framework where a strain tensor, whatever it is, is considered as a thermodynamic state variable. As a consequence, the Cauchy stress tensor is expressed as a function of a strain tensorÐand, in many cases, of one or more other state variables, such as the temperature. Such a choice for the kinematic state variable is clearly relevant in the case of infinitesimal or finite elasticity. However, one can ask whether an alternative state variable could not be considered. In the case of finite elastoplasticity, the choice of a strain tensor as the basic, kinematic state variable is not totally without issue, in particular in relation to the physical meaning of the internal state variable describing the permanent strains. In any case, this paper proposes an alternative to the strain tensor as a state variable, which is not based on the deformation (Lagrangian) gradient: the average conformation tensor of inter-atomic bonds. The purpose, however, is restricted to (1) a particular type of materials, namely the pure substances (copper or aluminium, for instance), (2) the nanoscale, and (3) the case of elasticity. The very simple case of two atoms of a pure substance in the solid state is first considered. It is shown that the kinematics of the inter-atomic bond can be characterized by a so called łconformationž tensor, and that the tensorial internal force acting on it can be immediately deduced from a single scalar function, depending only on the conformation tensor: the state potential of free energy (or interaction potential). Using an averaging procedure, these notions are then extended to a finite set of atoms, namely an atom and its first neighbours, which can be seen as the łunit cellž of a pure substance in the solid state considered as a discrete medium. They are also transposed to the Continuum case, where an expression of the Cauchy stress tensor is proposed as the first derivative of a state potential of density (per unit mass) of average free energy of inter-atomic bonds, which is an explicit function of the average conformation tensor of inter-atomic bonds. By applying a standard procedure in Continuum Thermodynamics, it is then shown that the objective part of the material derivative of this new state variable, at least in the case when the pure substance can be considered as an elastic medium, is equal to the symmetric part of the Eulerian velocity gradient, that is the rate of deformation tensor. In the case of uniaxial tension, a simple relationship is eventually set out between the average conformation tensor and a strain tensor, which is correctly approximated by the usual infinitesimal strain tensor as long as the conformation variations (from an initial state of conformation) are łsmallž. From this latter result, and assuming an elastic behavior, a simple expression for the state potential of density of average free energy is inferred, showing great simil","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114708376","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Reduced order modeling of geometrically nonlinear rotating structures using the direct parametrisation of invariant manifolds 利用不变流形直接参数化的几何非线性旋转结构的降阶建模
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-06-01 DOI: 10.46298/jtcam.10430
A. Martin, A. Opreni, A. Vizzaccaro, Marielle Debeurre, L. Salles, A. Frangi, O. Thomas, C. Touzé
{"title":"Reduced order modeling of geometrically nonlinear rotating structures using the direct parametrisation of invariant manifolds","authors":"A. Martin, A. Opreni, A. Vizzaccaro, Marielle Debeurre, L. Salles, A. Frangi, O. Thomas, C. Touzé","doi":"10.46298/jtcam.10430","DOIUrl":"https://doi.org/10.46298/jtcam.10430","url":null,"abstract":"The direct parametrisation method for invariant manifolds is a nonlinear reduction technique which derives nonlinear mappings and reduced-order dynamics that describe the evolution of dynamical systems along a low-dimensional invariant-based span of the phase space. It can be directly applied to finite element problems. When the development is performed using an arbitrary order asymptotic expansion, it provides an efficient reduced-order modeling strategy for geometrically nonlinear structures. It is here applied to the case of rotating structures featuring centrifugal effect. A rotating cantilever beam with large amplitude vibrations is first selected in order to highlight the main features of the method. Numerical results show that the method provides accurate reduced-order models (ROMs) for any rotation speed and vibration amplitude of interest with a single master mode, thus offering remarkable reduction in the computational burden. The hardening/softening transition of the fundamental flexural mode with increasing rotation speed is then investigated in detail and a ROM parametrised with respect to rotation speed and forcing frequencies is detailed. The method is then applied to a twisted plate model representative of a fan blade, showing how the technique can handle more complex structures. Hardening/softening transition is also investigated as well as interpolation of ROMs, highlighting the efficacy of the method.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120988076","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Optimization of a dynamic absorber with nonlinear stiffness and damping for the vibration control of a floating offshore wind turbine toy model 基于非线性刚度和阻尼的海上浮式风力机模型振动控制动态减振器优化
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-05-16 DOI: 10.46298/jtcam.10123
Pierre-Olivier Mattei, R. Côte
{"title":"Optimization of a dynamic absorber with nonlinear stiffness and damping for the vibration control of a floating offshore wind turbine toy model","authors":"Pierre-Olivier Mattei, R. Côte","doi":"10.46298/jtcam.10123","DOIUrl":"https://doi.org/10.46298/jtcam.10123","url":null,"abstract":"Passive vibration mitigation of offshore wind turbines using nonlinear absorbers or nonlinear energy sinks has started to receive attention in the literature. In most cases, little attention has been paid to the possibility of detached resonances that occur when the nonlinear energy sink is attached to the linear system describing the wind turbine. Sea motions that alter the initial conditions of the floating offshore wind turbine may cause the nonlinear energy sink to operate at one or more detached resonances, completely negating its ability to control turbine vibration. In this paper, we are interested in optimizing the parameters of a nonlinear energy sink with nonlinear stiffness and nonlinear viscous damping for vibration control of a toy model (e.g., a linear mass-spring-damper system) of a floating offshore wind turbine over its entire operating range. The mechanism of cancellation of the detached resonance is studied analytically under 1:1 resonance. It is shown that the nonlinear energy sink with properly tuned nonlinear viscous damping allows the complete elimination of undesired regimes and completely restores the absorber's ability to strongly limit the vibration of a floating offshore wind turbine over its entire forcing range. The results obtained over a wide range of parameters suggest that both the optimal nonlinear energy sink parameters (linear and nonlinear stiffness and nonlinear damping) and the damping of floating offshore wind turbine vibration depend on simple power laws of nonlinear energy sink mass and linear damping.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"232 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-05-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126167897","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Plasticity and ductility of an anisotropic recrystallized AA2198 Al-Cu-Li alloy in T3 and T8 conditions during proportional and non-proportional loading paths: simulations and experiments AA2198 Al-Cu-Li各向异性再结晶合金在T3和T8条件下的比例加载和非比例加载的塑性和延性:模拟和实验
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-03-13 DOI: 10.46298/jtcam.8913
X. Kong, Jianqiang Chen, Y. Madi, D. Missoum-Benziane, J. Besson, T. Morgeneyer
{"title":"Plasticity and ductility of an anisotropic recrystallized AA2198 Al-Cu-Li alloy in T3 and T8 conditions during proportional and non-proportional loading paths: simulations and experiments","authors":"X. Kong, Jianqiang Chen, Y. Madi, D. Missoum-Benziane, J. Besson, T. Morgeneyer","doi":"10.46298/jtcam.8913","DOIUrl":"https://doi.org/10.46298/jtcam.8913","url":null,"abstract":"The anisotropic material behaviour of a recrystallized AA2198 Al-Cu-Li alloy in T3 and T8 conditions was assessed by proportional loading of uniaxial-tension specimens in rolling (L), transverse (T) and diagonal (D) orientations. The width and longitudinal strains were measured to quantify plastic anisotropy. Notched-tension samples were tested in L and T directions. The material showed weak anisotropy in terms of stress strain curves and a moderate plastic anisotropy, consistent with its texture obtained by EBSD. An anisotropic Bron-Besson type material model was identified using this data base and a micro shear-only (SO) test. The model succeeded in predicting the behaviour of micro specimens for proportional tension-only (TO) loading and non-proportional load path changes including 'shear to tension' (ST) as well as 'tension to shear' (TS) tests. The non-proportional loading was achieved using a newly designed cross shaped sample. It was loaded in one direction, unloaded and subsequently loaded in the orthogonal direction till fracture. The average stretch to fracture of both alloys measured by a four point frame optical extensometer decreased by 29 % and 16 % for T3 and T8 respectively for the 'shear to tension' experiment compared to the proportional TO experiment. The average stretch to fracture of 'tension to shear' tests was reduced by 10 % for 2198T3 and hardly reduced for 2198T8 compared to the stretch to fracture of the SO tests, but subject to strong scatter. FE simulations showed local accumulated strain to fracture values that were similar for all loading histories for the T8 condition (0.73 − 0.84). Lower strain to fracture values were found in T3 condition (0.45 − 0.73), despite the enhanced macroscopic ductility in tension. This was attributed to larger less localized plastic zones, especially for the ST test. The ductility scatter was attributed to necking and damage development in tension that can affect strain localization, associated fracture path and ductility, as observed by DIC and fractography.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-03-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114749180","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Thermal and energy analysis of DMTA tests DMTA测试的热能和能量分析
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-03-09 DOI: 10.46298/jtcam.9726
A. Chrysochoos, O. Arnould
{"title":"Thermal and energy analysis of DMTA tests","authors":"A. Chrysochoos, O. Arnould","doi":"10.46298/jtcam.9726","DOIUrl":"https://doi.org/10.46298/jtcam.9726","url":null,"abstract":"This paper investigates the suitability of the isothermal linear viscoelastic framework to describe the behavior of polymers observed during DMTA tests. A good interpretation of these tests is important because, in practice, they are used to construct master curves using the time-temperature superposition principle at small strain. These curves are then considered to predict the material behavior under experimentally unreachable thermal and/or loading frequency conditions. Currently, the DMTA protocol neglects the temperature variations induced by the deformation of polymers. We wonder if these temperature variations can have an influence on the measurement of dynamic moduli. To answer this question, quantitative infrared techniques were developed and used to assess small temperature variations of samples undergoing cyclic loadings during mechanical spectrometry tests. Thermal and mechanical data were used to quantify the viscous dissipated and the thermoelastic coupling energies that can be both associated with the hysteretic stress-strain response of polymers. Energy balances were then performed to quantify the relative importance of dissipative and thermoelastic coupling heat sources. From the energy standpoint, it is found that the thermoelastic energy rate was dozens of times higher than the dissipation. Especially at low frequencies, thermoelastic effects can have a greater influence on the loss modulus value than viscosity.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-03-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127432439","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Fatigue crack growth under large scale yielding condition: a tool based on explicit crack growth 大规模屈服条件下疲劳裂纹扩展:一种基于显式裂纹扩展的工具
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-02-03 DOI: 10.46298/jtcam.9296
V. Maurel, V. Chiaruttini, A. Köster, D. Missoum-Benziane
{"title":"Fatigue crack growth under large scale yielding condition: a tool based on explicit crack growth","authors":"V. Maurel, V. Chiaruttini, A. Köster, D. Missoum-Benziane","doi":"10.46298/jtcam.9296","DOIUrl":"https://doi.org/10.46298/jtcam.9296","url":null,"abstract":"Fatigue crack growth under large-scale yielding condition is studied for high-temperature loading. The applied strains are so important that diffuse damage phenomena are visible as a network of micro-cracks in front of the major crack. The survey of a macroscopic cracked surface is nevertheless possible, and numerical simulations with explicit representation of this crack are carried out to evaluate crack driving forces. The proposed numerical scheme takes into account plastic wake in the course of crack growth in a 3D model. A non-local model of fatigue crack growth rate, based on partition of strain energy density into elastic and plastic terms, yields improved results as compared to classical assessment of ∆J by numerical methods.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"183 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115009040","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Machine learning and micromechanics as allies to establish composition-property correlations in cement pastes 机器学习和微观力学作为盟友,建立水泥浆的成分-性能相关性
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2023-01-26 DOI: 10.46298/jtcam.9830
Tulio Honorio, Sofiane Hamadouche, A. Fau
{"title":"Machine learning and micromechanics as allies to establish composition-property correlations in cement pastes","authors":"Tulio Honorio, Sofiane Hamadouche, A. Fau","doi":"10.46298/jtcam.9830","DOIUrl":"https://doi.org/10.46298/jtcam.9830","url":null,"abstract":"Composition-property correlations are fundamental to understand cement-based materials behavior and optimize their formulation. Modelling based on fundamental material component constitutes a reliable tool to establish these correlations with the advantage of better exploring formulation space when compared with the often adopted experimental trial-and-error approaches. In this context, Machine Learning (ML) and Micromechanics-Based (MB) methods have been concurrently used for property prediction from material composition. Here, we show that these techniques can be allies for establishing composition-property correlations. We focus on predictions of Ordinary Portland Cement pastes elastic properties, but the outlined strategy can be extended to other cement systems. Various microstructures representations are considered in MB estimates, including multiscale representations and representations with ellipsoidal inclusions. In contrast, ML predictions do not need any a priori assumption on material microstructure. Predictions using ML and MB yield similar accuracy when compared against test datasets (but ML performed much better regarding the error estimated in training datasets). Working as allies, ML can be deployed to evaluate the (lack of) knowledge over the multi-dimensional parametric domains, and micromechanics provides a theoretical background for property data curation and is a tool to make up for missing data in databases.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128575243","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Photometric DIC: a unified framework for global Stereo Digital Image Correlation based on the construction of textured digital twins 基于纹理数字孪生体构建的全球立体数字图像相关统一框架
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2022-08-31 DOI: 10.46298/jtcam.7467
Raphaël Fouque, R. Bouclier, J. Passieux, J. Perie
{"title":"Photometric DIC: a unified framework for global Stereo Digital Image Correlation based on the construction of textured digital twins","authors":"Raphaël Fouque, R. Bouclier, J. Passieux, J. Perie","doi":"10.46298/jtcam.7467","DOIUrl":"https://doi.org/10.46298/jtcam.7467","url":null,"abstract":"An innovative approach allowing to rigorously address surface curvature and lighting effects in Digital Image Correlation (DIC) is proposed. We draw inspiration from the research work in Computer Vision (CV) regarding the physical modelling of a camera and adopt it to bring novel and significant capabilities for full-field measurements in experimental solid mechanics. It gives rise to a unified framework for global stereo DIC that we call Photometric DIC (PhDIC). It is based on the irradiance equation that relies on physical considerations and explicit assumptions, which stands for a clear breakthrough compared to the usual grey level conservation assumption. Most importantly, it allows to define a Digital Twin of the Region of Interest, which makes it possible to compare a model with different observations (real images taken from different viewpoints). This results in a consistent formalism throughout the framework, suitable for large-deformation and large-strain displacement measurements. The potential of PhDIC is illustrated on a real case. Multi-view images are first used to measure (or scan) the shape and albedo (sometimes called intrinsic texture) of an open-hole plate. The kinematic basis considered for the displacement measurement is associated to a Finite-Element mesh. Results for the shape and albedo measurement are compared for two completely different sets of pictures. Eventually, a large displacement of the structure is measured using a well-chosen single image.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121947616","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Effects of the microstructural uncertainties on the poroelastic and the diffusive properties of mortar 微观结构不确定性对砂浆孔隙弹性和扩散性能的影响
Journal of Theoretical, Computational and Applied Mechanics Pub Date : 2022-06-30 DOI: 10.46298/jtcam.8849
A. Socié, Y. Monerie, F. Péralès
{"title":"Effects of the microstructural uncertainties on the poroelastic and the diffusive properties of mortar","authors":"A. Socié, Y. Monerie, F. Péralès","doi":"10.46298/jtcam.8849","DOIUrl":"https://doi.org/10.46298/jtcam.8849","url":null,"abstract":"The assessment of the durability of civil engineering structures subjected to several chemical attacks requires the development of chemo-poromechanical models. The mechanical and chemical degradations depend on several factors such as the initial composition of the porous medium. A multi-scale model is used to incorporate the multi-level microstructural properties of the mortar material. The present paper aims to study the effect of morphological and local material properties uncertainties on the poroelastic and diffusive properties of mortar estimated with the help of analytical homogenization. At first, the proposed model is validated for different cement paste and mortar by comparison to experimental results and micromechanical models. Secondly, based on a literature study, sensitivity and uncertainty analysis have been developed to assess the stochastic predictions of the multi-scale model. The main result highlights the predominant impact of the cement matrix phases (C-S-H) and interfacial transition area at the mortar scale. Furthermore, the sensitive analysis underlines that the material properties induce more variability than the volume fraction.","PeriodicalId":115014,"journal":{"name":"Journal of Theoretical, Computational and Applied Mechanics","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121391792","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书