{"title":"High-resolution spectral response measurement based on single sideband modulation","authors":"Dengcai Yang, Ling Feng, Feng Yang, Yunxin Wang","doi":"10.1117/12.2691429","DOIUrl":"https://doi.org/10.1117/12.2691429","url":null,"abstract":"The spectral response of passive optical devices reveals the important characteristics of their materials and functions and is an essential evaluation index in the development, production and application of optical devices. In this paper, a broadband and high-resolution spectral response measurement method is proposed based on single sideband modulation technology. The optical carrier emitted by the tunable light source is incident on the dual parallel Mach Zehnder modulator (DPMZM), and the Microwave signal emitted by the frequency source is loaded on the modulator. Combined with the bias voltage and the hybrid couple, carrier suppression single sideband (CS-SSB) modulation is realized. The modulated signal is received by the photodetector after passing through the passive optical device under test, and frequency of the single sideband modulated optical signal can be swept through the frequency source. This signal passes through the optical beam splitter, and the spectral response of the passive optical device is measured by the balance detection of two signals. A broadband high-resolution spectral response measurement system is constructed in the experiment. The experimental results show that the spectral measurement resolution of the system reaches at least 5 MHz, and the measurement range is 1528-1568 nm. This measurement method combines a tunable light source with a single sideband microwave photon scanning frequency. The system structure is simple, the measurement accuracy is high, and the measurement range is large. It can realize the spectrum response measurement of passive optical devices such as narrow linewidth filters and wavelength division multiplexers.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"70 38","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133085623","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jing Yin, Yan Zhao, Feng Yang, Dengcai Yang, Yunxin Wang
{"title":"A method for generating reconfigurable photonic arbitrary phase-coded microwave signals with fundamental/double/triple carrier frequencies","authors":"Jing Yin, Yan Zhao, Feng Yang, Dengcai Yang, Yunxin Wang","doi":"10.1117/12.2691672","DOIUrl":"https://doi.org/10.1117/12.2691672","url":null,"abstract":"A method for generating reconfigurable photonic arbitrary phase-coded microwave signal with fundamental/double/triple carrier frequencies is proposed and demonstrated. A dual-parallel dual-polarization Mach‒Zehnder modulator (DP-DPMZM) and an optical bandpass filter (OBPF) are cascaded to generate orthogonally polarized optical carrier signals and 1st/2nd/3rd -order sideband signals, which are sent into a polarization-dependent phase modulator (PD-PM), which can realize phase modulation with different polarization state optical signals. The phase modulated signal after PD-PM will be projected into the polarization direction with a polarizer (Pol) and the phase shifting microwave signal will be obtained with a photodetector (PD). This method enables the frequency multiplication factor to be changed by tuning the bias voltage of the modulator alone, which makes the system can work in a wide bandwidth, and it also reduces the frequency requirements of the local oscillator (LO) signal. In the simulation, binary phase-coded signals with center frequencies of 6 GHz, 12 GHz, and 18 GHz are generated, and their performance is verified.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"56 2","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114052972","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Xiao-jing Shi, Zhen Wang, Xinping Pan, Junjie Li, Ke Wang
{"title":"Dual-branch visible and infrared image fusion transformer","authors":"Xiao-jing Shi, Zhen Wang, Xinping Pan, Junjie Li, Ke Wang","doi":"10.1117/12.2691207","DOIUrl":"https://doi.org/10.1117/12.2691207","url":null,"abstract":"The process of combining features from two images of different sources to generate a new image is called image fusion. In order to adapt to different application scenarios, deep learning was widely used. However, existing fusion networks focued on the extraction of local information, neglected the long-term dependencies. In order to improve the defect, a fusion network based on Transformer was proposed. To accommodate our experimental equipment, we made some modifications to Transformer. A dual-branch autoencoder network was designed with detail and semantic branches, the fusion layer consists of CNN and Transformer, and the decoder reconstructs the features to get the fused image. A new loss function was proposed to train the network. Based on the results, an infrared feature compensation network was designed to enhance the fusion effect. In several metrics that we focus on, we compared with several other algorithms. As the experiments on some datasets, our method had improvement on SCD, SSIM and MS-SSIM metrics, and was basically equal to other algorithms on saliency-based structural similarity, weighted quality assessment, and dge-based structural similarity. From the experimental results, we can see that our method was feasible.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131960016","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Shuang He, Peng Zhang, Qi Li, Y. Ning, Yang Liu, Hao Yu, Tong Wu, Shoufeng Tong, Huilin Jiang
{"title":"1.7μm modulated digital signal transmission through water fog using a pump-modulated fiber laser","authors":"Shuang He, Peng Zhang, Qi Li, Y. Ning, Yang Liu, Hao Yu, Tong Wu, Shoufeng Tong, Huilin Jiang","doi":"10.1117/12.2691304","DOIUrl":"https://doi.org/10.1117/12.2691304","url":null,"abstract":"The 1.7 μm modulated digital signals transmission through water fog based on a homemade pump-modulated fiber laser is proposed and experimentally demonstrated. The 1.7 μm modulated fiber laser could improve transmission performance through water fog.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114319439","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"CotNet target tracking algorithm based on attention mechanism and context-awareness","authors":"Xinping Pan, Zhen Wang, Xiao Shi, Jianing Li","doi":"10.1117/12.2691214","DOIUrl":"https://doi.org/10.1117/12.2691214","url":null,"abstract":"In recent years, Siamese network algorithms based on deep learning classes have achieved better tracking accuracy and speed and become one of the research hotspots in the field of target tracking. However, the traditional Siamese network algorithm lacks a holistic view of the target and extracts shallow features, making it easy to lose track of the target in complex environments. The paper proposes a Contextual transformer network for visual recognition (CotNet) target tracking algorithm based on attentional mechanisms and contextual awareness to address this. The paper innovatively uses the CotNet50 network as the backbone network and adopts a residual network variant design scheme with a self-attention mechanism, which can enhance the feature representation capability of the network model and improve the performance of the algorithm. In addition, to handle changes in appearance during target tracking, an efficient channel attention module, and a global contextual feature module are embedded in the backbone network branch to enhance the network's overall perception of the target and improve the algorithm's tracking accuracy. The experimental results of this paper's algorithm on the VOT2018 data show that the accuracy, robustness, and EAO (Expected Average Overlap) are improved by 7.3%, 13.95%, and 11.9% respectively compared to SiamFC. It has good tracking results when dealing with complex scenes on the OTB100 dataset.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130297092","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An active mmWave antenna based on tunable zero-mode resonances","authors":"Ji-gang Cao, Yunlong Gu, Yong Luo","doi":"10.1117/12.2691191","DOIUrl":"https://doi.org/10.1117/12.2691191","url":null,"abstract":"An active millimeter wave (mmWave) antenna with tunable zero-mode[1] resonances is proposed in this paper. Based on the zero-mode theory, shorting pins are employed to the patch antenna so as to produce TM10 and the zero modes. Particularly, PIN diodes is utilized as the switch for tuning these resonances upwardly or downwardly, thereby obtaining a wide bandwidth from 24.3-28.8 GHz on the 0.508 mm thick substrate. This proposed antenna can be applied to B5G/6G scenarios wherever mmWave bands are needed.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126427712","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ruize Niu, Xiyang Zhi, Shikai Jiang, Wei Zhang, J. Gong
{"title":"Development of new ultra-large aperture optical remote sensing imaging technology","authors":"Ruize Niu, Xiyang Zhi, Shikai Jiang, Wei Zhang, J. Gong","doi":"10.1117/12.2691298","DOIUrl":"https://doi.org/10.1117/12.2691298","url":null,"abstract":"With the rapid development of earth observation by optical remote sensing satellites, there is an urgent requirement of remote sensing data with high-resolution in environmental monitoring, urban planning and other applications. The resolution of remote sensing images (RSIs) significantly depends on the aperture size of space imaging system. However, limited by manufacturing level and carrying capacity, the traditional optical materials and reflection/refraction imaging principle have encountered a bottleneck in the manufacturing of space imaging system with ultra-large aperture and lightweight. Consequently, it is necessary to develop brand new space optical imaging systems. In this paper, we summarize the imaging mechanism and development history of three ultra-large aperture imaging technologies, including synthetic aperture imaging technology, diffractive membrane imaging technology and rotating synthetic aperture imaging technology, and analyze the challenges existing in their application.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127969081","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Signal analysis of bistatic arc array SAR data with an accelerated moving transmitter","authors":"Zhen Qin, Wei Xu, Pingping Huang, W. Tan, Yaolong Qi, Zhiqi Gao","doi":"10.1117/12.2691284","DOIUrl":"https://doi.org/10.1117/12.2691284","url":null,"abstract":"In the bistatic arc array synthetic aperture radar (AA-BiSAR) with a moving transmitter, the moving transmitter is helpful to improve the flexibility of the imaging system and expand the imaging scene, which has important significance in the field of helicopter assisted landing, emergency rescue and so on. The motion state of the transmitter is closely related to the bistatic arc array SAR echo model and imaging quality. This article establishes the echo signal model under accelerated motion, analyzes the impact of acceleration on echo phase and imaging quality, studies the effect of different accelerations on the approximate expansion phase error of slant range, and provides relevant analysis results through point target simulation experiments. The analysis results have a certain guiding significance for the follow-up moving transmitter bistatic arc array SAR high-precision and accurate imaging and motion error compensation.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122076707","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Illumination analysis and optimization for a fast detection device of lube oil wear debris","authors":"Hong Xiao, Xu Fan, Song Feng, Jun Tan","doi":"10.1117/12.2691280","DOIUrl":"https://doi.org/10.1117/12.2691280","url":null,"abstract":"With the development of large-scale wear debris, the demand for condition monitoring of mechanical devices increases accordingly. The fast detection device of lube oil wear debris is intended for the mechanical equipment lubricated with grease, collecting information on the abrasive particles in the equipment lubricating grease, and consequently monitor the status of the equipment. The rapid detection device needs a fitting lighting environment to collect the abrasive particle information; therefore, it is necessary to research into the lighting system of the fast detection device.","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133070744","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of monitoring thickness and speed of cylindrical part based on laser self-mixing interference in a single-channel system during external grinding","authors":"Wu Sun, Zhuo Yang, Guo Feng, Zeqing Guo","doi":"10.1117/12.2691325","DOIUrl":"https://doi.org/10.1117/12.2691325","url":null,"abstract":"We design a simultaneous measurement of the thickness and speed to monitor mechanical cylindrical parts during external grinding based on a laser self-mixing interference in a single-channel system. If the wavelength is modulated via the laser-injecting-current to generate a frequency shifting corresponding to the rising- and falling- edge of the triangular modulated function. The Doppler frequency caused by the cylindrical part is split into rising- and falling- edge frequencies by the frequency shifting due to wavelength variations. The expressions of the measurement are derived via the derivative of the phase’s polynomial based on the emission-intensity expressions. The frequency shifting is related to the modulation function and the thickness of the cylindrical part. The rising- and falling- edge frequencies of the laser self-mixing interference obtained from the spectrum are used for calculating the Doppler frequency and the frequency shifting for estimating the thickness and the rotation speed of a cylindrical part during external grinding and the results show a good standard derivation less than 10−3 .","PeriodicalId":114868,"journal":{"name":"International Conference on Optoelectronic Information and Computer Engineering (OICE)","volume":"08 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125009084","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}