{"title":"Determination of technical condition of high-pressure pump and injectors of MAN B&W 6S50MC-C marine diesel engine by changing the pressure and temperature in pipeline","authors":"L. Volkova","doi":"10.25206/1813-8225-2022-184-12-17","DOIUrl":"https://doi.org/10.25206/1813-8225-2022-184-12-17","url":null,"abstract":"The purpose of the work is to propose methods and means for determining the technical condition of fuel equipment. A method is proposed for determining the technical condition of the high-pressure pump and injectors of the marine diesel MAN B&W 6S50MC-C by changing the maximum fuel pressure and temperature of the outer surface of the pipeline. For fuel equipment with a maximum pressure in the pipeline from 50 to 150 MPa, the permissible pressure change zone is determined. A formula is proposed that additionally takes into account the cyclic fuel supply and its mass when estimating the temperature from its compression by the pump plunger. The fuel temperature during compression is determined depending on the pressure value. The calculation of the heat transfer process through the pipeline wall and from the heated wall surface to the air is performed. A portable RGK PL12 pyrometer is proposed to measure the temperature on the pipeline surface and determine the technical condition of the fuel equipment. The permissible temperature change zone of the pipeline surface is given, according to which the serviceable condition of the pump and the nozzle is evaluated.","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129574996","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Comparison of drilling and helical milling process for holes in titanium alloy","authors":"D. S. Makashin, D. Blokhin","doi":"10.25206/1813-8225-2022-184-36-40","DOIUrl":"https://doi.org/10.25206/1813-8225-2022-184-36-40","url":null,"abstract":"Drilling holes in titanium alloy VT-3 is a difficult task due to its poor machinability. The evaluation of the helical milling process is carried out by comparing the axial force, surface roughness and diametrical accuracy of the hole with the conventional drilling process. Holes created with helical milling have a high surface quality at lower axial feed, while the drilling process is accompanied by a higher axial feed, which leads to vibration of the cutting tool. When manufacturing high-precision holes in the elements of fuel control equipment, it is recommended to use helical milling","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132878532","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Study of morphology, chemical composition and corrosion resistance of «TiC–NiTi» hard alloy modified by powerful ion beam","authors":"A. Badamshin, A. O. Leptyuk","doi":"10.25206/1813-8225-2022-182-33-37","DOIUrl":"https://doi.org/10.25206/1813-8225-2022-182-33-37","url":null,"abstract":"The article presents the results of a study of the effect of ion–beam treatment with a high–power ion beam (HPIB) on the change in topography, morphology, chemical composition and corrosion resistance of the surface layers of a tungsten–free hard alloy of the «TiC–NiTi» system. The samples are characterized by scanning electron microscopy, energy dispersive X–ray analysis, scanning probe microscopy, and metallographic analysis. It is revealed that due to the impact of HPIB, the surface layer of the sample undergoes melting with the formation of extended microcracks. At the same time, a decrease in the oxygen concentration from 24,6 to 13,7 at. % is recorded in the surface layer of the sample, and at some points on the sample it is completely absent. This result indicates the dissociation of titanium oxide under the influence of temperatures arising during HPIB irradiation. It is most likely that it is the thermal dissociation of titanium oxide and melting of the sample surface that are the main reasons for the increase in the corrosion resistance of the «TiC–NiTi» system alloy.","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130776692","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Method of formation of numerical projection-grid algorithm on basis of «three-dimensional regular element» for calculation of 3D-models of magnetic field in cylindrical coordinate system for synchronous magnetoelectric machines as part of high-tech electrotechnical complexes","authors":"A. Tatevosyan, E. Andreeva","doi":"10.25206/1813-8225-2019-168-40-45","DOIUrl":"https://doi.org/10.25206/1813-8225-2019-168-40-45","url":null,"abstract":"","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130842696","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Study of changes in color characteristics of steel under thermal exposure","authors":"A. S. Gorbunov, M. V. Elfimova, Y. Bezborodov","doi":"10.25206/1813-8225-2022-182-119-124","DOIUrl":"https://doi.org/10.25206/1813-8225-2022-182-119-124","url":null,"abstract":"The article presents the results of studies of steel samples under thermal exposure, by measuring color characteristics using a model of color decomposition into RGB components. The data obtained can be used in the investigation of fires at objects made of steel building structures and objects made of steel. Thus, the specialist will be able to confirm his conclusions regarding the establishment of the source of the fire and the ways of its spread.","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133412839","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
V. Grishchenko, A. Tumakov, M. Poleshkin, M. Kilina, D. Dymochkin
{"title":"Modeling automatic horizontation system of steep-sloping mobile machine with hydraulic sensor roll","authors":"V. Grishchenko, A. Tumakov, M. Poleshkin, M. Kilina, D. Dymochkin","doi":"10.25206/1813-8225-2019-164-11-18","DOIUrl":"https://doi.org/10.25206/1813-8225-2019-164-11-18","url":null,"abstract":"","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114624147","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Digital relay protection complex testing method development for electric power equipment","authors":"A. V. Simakov, V. V. Kharlamov, V. Skorokhodov","doi":"10.25206/1813-8225-2019-167-58-63","DOIUrl":"https://doi.org/10.25206/1813-8225-2019-167-58-63","url":null,"abstract":"","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114676014","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Simulation of dynamics of oscillations of manipulator using Lagrange equations of second order","authors":"A. H. Shamutdinov, I. Lesnyak","doi":"10.25206/1813-8225-2022-183-53-57","DOIUrl":"https://doi.org/10.25206/1813-8225-2022-183-53-57","url":null,"abstract":"The article discusses the main stages of compiling a dynamic model of manipulator oscillations, based on the method of mathematical modeling, the basis of which is the circuit design of the manipulator under study. A schematic solution of the manipulator has been compiled as a system in which an arbitrary vertical force Pz and moments Mx, My relative to the X and Y axes act on the working panel, elastic elements — springs, with known stiffness coefficients. On the basis of the equation of dynamics, in the form of Lagrange of the second order, a system of equations of oscillatory processes arising from external loads is compiled, natural frequencies of elastic oscillations of the manipulator are determined, and conclusions are drawn.","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128742740","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. A. Akhmedzhanov, V. F. Chegodaev, A. Cheredov, A. Shchelkanov
{"title":"Phase motion transducer","authors":"R. A. Akhmedzhanov, V. F. Chegodaev, A. Cheredov, A. Shchelkanov","doi":"10.25206/1813-8225-2019-167-82-85","DOIUrl":"https://doi.org/10.25206/1813-8225-2019-167-82-85","url":null,"abstract":"","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133074423","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Pyrometer with video monitoring of measurement area","authors":"V. Zakharenko, D. Lobov, A. G. Shkayev, A. Valke","doi":"10.25206/1813-8225-2022-181-73-77","DOIUrl":"https://doi.org/10.25206/1813-8225-2022-181-73-77","url":null,"abstract":"A pyrometer with non-parallel sighting is developed, which allows simultaneously with temperature measurement to perform video surveillance of the control object. Pyrometer has optically connected lens, signal meter, thermostat in which radiation receiver is placed, and video camera. The front surface of the thermostat is polished, directed at an angle of 45 ° to the optical axis of the lens and has a hole that acts as a field diaphragm. Video camera is directed to polished surface of thermostat perpendicular to optical axis of lens. Pyrometer operation, its design and functional diagram are described.","PeriodicalId":107042,"journal":{"name":"Omsk Scientific Bulletin","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123499527","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}