{"title":"Zigbee based Wireless Sensor Network for Smart Energy Meter","authors":"Pratham Sharma","doi":"10.35940/ijrte.c7861.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7861.0912323","url":null,"abstract":"Wireless sensor networks are expanding across a wide range of application scenarios. The most widely used transmitter is \"ZigBee,\" which is used in wireless sensor networks. Based on the IEEE standard known as IEEE 802.15.4, ZigBee is an enabling low-cost technology that offers minimal energy consumption and a low data rate. It is used for remote control, medical aid, home automation, industry control, and other wireless sensor applications, in addition to wireless sensor networks and personal area network applications. This paper aims to develop a wireless sensor network and a protocol for smart energy meter applications. Our proposed system comprises a digital energy meter, a ZigBee coordinator, and a management application. A terminal alert and a cover alarm can be automatically sent to the management software by the wireless meter reading system once it has read the unit. Mistakes from Errors in leakage metering reading to manual meter reading can be avoided. This proposed system will improve efficiency by reducing labor intensity to liberate labor and force. The system setup can accommodate a large number of energy meters with sufficient hop network depth to detect a new energy meter automatically. The technology can be widely used in wireless monitoring and control applications because of its low cost, low power consumption, extended battery life, and mesh networking's ability to extend high reliability to a broader range. To connect a variety of low-power devices wirelessly, ZigBee will satisfy the rising demand. For the future generation of industrial technologies, ZigBee will be deployed.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"92 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136277407","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ryan Marcus Jeremy M. Lupague, Romie C. Mabborang, Prof. Alvin G. Bansil, Melinda M. Lupague
{"title":"Assessing Transfer Learning Models for Medical Image Classification: A Comparative Study on Alzheimer’s MRI, Chest CT-Scan, and Chest X-ray Images","authors":"Ryan Marcus Jeremy M. Lupague, Romie C. Mabborang, Prof. Alvin G. Bansil, Melinda M. Lupague","doi":"10.35940/ijrte.c7897.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7897.0912323","url":null,"abstract":"Deep learning has revolutionized the field of neural network models, offering limitless applications in various do- mains. This study focuses on Transfer Learning (TL), a technique leveraging pre-trained deep learning models trained on large datasets for image classification tasks. Specifically, this research explores the effectiveness of various transfer learning models in three medical image datasets: Alzheimer’s MRI images, Chest CT-Scan images, and Chest X-ray images. The main objective of this study is to assess and compare the performance of various TL models, including MobileNetV2, ResNet50, Xception, and InceptionV3, on the three medical image datasets. Additionally, a customized Convolutional Neural Network (CNN) model is developed to compare its performance against the pre-trained TL models. Each model was trained and evaluated on the three medical image datasets. The performance of the TL models was compared in terms of accuracy and training time. The results of this study revealed that ResNet50 consistently outperforms other TL models, demonstrating accurate predictions at the expense of longer training times. MobileNetV2 and InceptionV3 exhibit the fastest training times across all datasets, but they demonstrate poorer performance in certain datasets. The developed CNN model performs poorly in terms of accuracy and tends to overfit, indicating that creating a CNN model for medical image classification is not feasible in this study. The findings of this study offer valuable insights into the performance of TL models in medical image datasets. Researchers can utilize this information to make informed decisions when selecting TL models for medical imaging applications. Understanding the strengths and weaknesses of different TL models enhances the potential for accurate and efficient medical image classification. The insights gained from this study contribute to researchers’ understanding of selecting transfer learning models for medical imaging applications, aiding in the advancement of medical image analysis and diagnosis.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136278071","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Dr. KRT. Nur Suhascaryo, Sulistyorini Widi Hastuti, Eko Suyanto
{"title":"Drilling Casing Design using Drilling Software at Well “Well X-01” Field “S”","authors":"Dr. KRT. Nur Suhascaryo, Sulistyorini Widi Hastuti, Eko Suyanto","doi":"10.35940/ijrte.c7869.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7869.0912323","url":null,"abstract":"Well \"X-01\" is a slant (J-Type) directional well and will be subjected to appropriate and technically qualified drilling casing planning in order to prevent problems such as burst, collapse, and tension that can cause increased internal and external pressure loads experienced by the casing. The methodology used in this research is document study and quantitative analysis in casing planning using Drilling Software by taking into account the loading acting on the casing, which is burst, collapse, tension, biaxial, and triaxial loads. Casing design planning for Well \"X-01\" is carried out by analyzing the casing setting depth based on PPFG data, considering kick tolerance, then casing planning is carried out using Drilling Software. The results of drilling casing planning inWell \"X-01\" Field \"S\" using Drilling Software, five design routes were obtained, that is conductor casing using X-52 casing; 157.5 ppf, surface casing using K-55 casing; 94 ppf, intermediate casing using K-55 casing; 54.5 ppf, kick tolerance 32.55 bbls, production casing using K-55 casing; 40 ppf, kick tolerance 42.1 bbls, and production liner using K-55 casing; 23 ppf, kick tolerance 69.08 bbls. The safety factor of each route met API standards for the durability of the selected casing. In well \"X\", casing planning can be a reference in the casing design process stage because optimal and safe results are obtained.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136276654","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Machine Learning Algorithms Based Non Alcoholic Fatty Liver Disease Prediction","authors":"Bindu Bhargavi Munukuntla, Mrutyunjaya S. Yalawar","doi":"10.35940/ijrte.c7876.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7876.0912323","url":null,"abstract":"The early stage liver diseases prediction is an important health related research and using this kind of research easily can predict the diseases and take the remedies. The liver diseases are classified into different types such as liver cancer, liver tumor, fatty liver, hepatitis, cirrhosis etc. Non-Alcoholic Fatty Liver Disease is a kind of chronic disease which rigorous prediction is quite difficult at early stages. The prediction of fatty liver plays significant role in treating the disease and also constraining the next health consequences. This paper presents Machine Learning Algorithms based Non Alcoholic Fatty Liver Disease (NAFLD) prediction. The main objective of this project is to identify the potential factors causing NAFLD by using Machine Learning algorithms like Decision Tree (DT) classifier, Support Vector Machine (SVM) classifier, Random Forest (RF) classifier, Logistic regression (LR). Accuracy is used parameter for performance analysis evaluation. The findings of this paper show that random forest model accurately predicts a non-alcoholic fatty liver disease patient.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136276656","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"FPGA Based Efficient OFDM Based Design and Implementation for Data and Image Transmission for Healthcare","authors":"Vasanth Kumar T R","doi":"10.35940/ijrte.c7865.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7865.0912323","url":null,"abstract":"Enormous growth in telecommunication industry demands for high speed data transmission with better quality of service (Qos). The telecommunication networks are offering the services which is from 1 Mbps to several Mbps of speed. However, most of the existing techniques address to assure the very high speed data for multimedia communication. The multimedia data may find a suitable application in healthcare system. The OFDM modulation technique promises to provide the multimedia services at rather high speed using the spectrum more efficient compared traditional scheme like TDMA, FDMA. The orthogonality of carriers eliminates the interference among the closely packed carriers and offers comparatively efficient bandwidth. The OFDM design requires choosing proper parameter selection. Important feature of OFDM is that the multipaths are effectively eliminated by choosing a higher cyclic prefix values which, gives significant results but causing more energy loss. This paper presents an efficient design for OFDMtransceiver by using FPGA. The design is modeled and simulated using Matlab Simulink and finally the design is coded using Verilog RTL and simulated in modelsim and synthesizing and implementation is done using in Xilinx EDA tool. The image type of data is taken for transmission in the proposed OFDM transceiver system. The received image type data achieves PSNR value of 29.920dB and the binary input data achieves 36.06% improvement in power utilization and less area overhead. The paper also shows the improvement in area and power compared to existing authors.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"74 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136276834","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Calibration Considering the Direction of Rotation for Contact Type Three-Dimensional Position-Measuring Instruments","authors":"Hirofumi Maeda","doi":"10.35940/ijrte.c7867.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7867.0912323","url":null,"abstract":"In Japan, the aging of sewage facilities due to long-term use has become a significant social issue. As a result, there has been a growing interest in portable and easy-to-operate standalone pipe inspection robots in recent years. However, the pipes being inspected not only have level differences due to joint connections but also pose a high risk of toppling over due to deterioration, collapses, and sludge caused by external disturbances. Many standalone robots address this by suppressing tipping through tire shape and axle adjustments. However, this method is for suppression and not complete prevention. Therefore, we are exploring a software-based approach to prevent tipping through control of robot movement and aiming to achieve advanced self-position estimation. Currently, we are in the stage of verifying this self-position estimation. However, due to the curved nature of the pipes, it is difficult to accurately measure the robot's position and orientation using conventional measurement instruments. Thus, we have developed a specialized three-dimensional position measurement instrument for pipe inspection robots. Furthermore, although we performed calibration in the translational direction of the instrument, while improvements in accuracy were observed in the translational direction, the accuracy in the rotational direction deteriorated. In this paper, we propose a method to simultaneously calibrate the translational and rotational accuracy of the instrument to address this issue. We discuss the mechanism model, calibration parameters, elimination of redundant parameters by introducing redundancy, and parameter estimation using the Newton method. Additionally, through comparative validation using the instrument, we confirm that the position accuracy after calibration is within the range of approximately ±1.0 mm, and the orientation accuracy is within the range of approximately ±0.3 degrees. This demonstrates the effectiveness of the proposed method.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"2013 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136277054","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"AI Curriculum Design for Korea K-12 AI Education Through Analyzing AI Education Curriculum","authors":"Dong Hwa Kim","doi":"10.35940/ijrte.c7860.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7860.0912323","url":null,"abstract":"This paper deals with the curriculum design of Korean K-12 AI education. AI is the core technology of 4th wave and it is impact is wide and strong. Therefore, every country has s strong nurture system for AI manpower. However, there are few materials about curriculum design and operation experience documentation because AI was an interest since 2016, and its education is very new. In Korea, they started a program for teacher manpower education in 2020. Therefore, there is no manpower that had an experience in the design and operation of the K-12 AI curriculum. The AI curriculum is a core parameter for AI manpower. So, AI-advanced countries try to develop AI education methods. This paper analyzes the K-12 AI curriculum of the advanced countries, and then designs and suggests Korea’s K-12 AI curriculum.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"150 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136280182","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Efficient Descriptor of Histogram of Ridges Orientation Delineate for Fingernail","authors":"Abdullah Alzahrani","doi":"10.35940/ijrte.a7577.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.a7577.0912323","url":null,"abstract":"Fingernails structure are rich in orientation, ridges and edge features. Inspired by Edge Histogram Descriptor (EHD), this paper presents an efficient orientation-based local descriptor, named histogram of ridges orientation delineate (HROD). HROD is based on the fact that human vision is sensitive to edge features for image perception. For a given image, HROD algorithm first execute and perform a pre-process i.e., re-sizing, filtering, enhancement, segmentation, edge detection and feature extraction. Then, finds oriented edge maps according to predefined orientations using a well-known edge operator mask (2×2 sub block) and obtains a ridges orientation delineate map by choosing an orientation with the maximum edge magnitude for each pixel. In the experiment on this research, five oriented edge maps were used to generate and detect the maximum edge orientation construction of each block, namely vertical, horizontal, diagonal 45°, diagonal 135° and isotropic (non-orientation specific) orientation. Experimental results on fingernail images show that the performance of HROD comparable with the state-of-the-art orientation-based methods (e.g., Gabor filter, histogram of oriented gradients, and local directional code). Furthermore, the proposed HROD algorithm has advantages of low feature dimensionality and fast implementation for a real-time fingernails orientation recognition system.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136276655","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mahesh. P, Dr. M. Bonju Babu, K. Poornima, K. Samatha
{"title":"Thermodynamic Study of Properties in Certain Binary Liquid Mixtures Containing Anisole with 2-Butoxyethanol at Different Temperatures (303.15K to 318.15K)","authors":"Mahesh. P, Dr. M. Bonju Babu, K. Poornima, K. Samatha","doi":"10.35940/ijrte.c7903.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7903.0912323","url":null,"abstract":"Comprehensive experimental investigations were carried out on density (ρ), viscosity (η), and ultrasonic velocity (u) for binary mixtures comprising Anisole and 2-Butoxyethanol within the temperature range of 303.15K to 318.15K, covering the complete range of mole fractions. These parameters were measured at intervals of 5K. Derived excess parameters, including acoustic impedance (ZE), intermolecular free length (LEf), molar volume (VEm), excess ultrasonic velocity (uE), and excess viscosity (ηE), were calculated to probe the molecular interactions present in the mixture. These excess parameters were correlated with temperature and mole fraction, revealing the complexity and nature of intermolecular interactions. Notably, the Arrhenius, Bingham, Eyring, Grunberg, Kurata, Nissan, and Tamura models were utilized to theoretically validate the acquired empirical data. This study aims to offer invaluable insights into the thermodynamics and molecular dynamics that govern these binary liquid mixtures.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136279264","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An Optimized and Privacy-Preserving System Architecture for Effective Voice Authentication over Wireless Network","authors":"Dr. Aniruddha Deka, Dr. Debashis Dev Misra","doi":"10.35940/ijrte.c7862.0912323","DOIUrl":"https://doi.org/10.35940/ijrte.c7862.0912323","url":null,"abstract":"The speaker authentication systems assist in determining the identity of speaker in audio through distinctive voice characteristics. Accurate speaker authentication over wireless network is becoming more challenging due to phishing assaults over the network. There have been constructed multiple kinds of speech authentication models to employ in multiple applications where voice authentication is a primary focus for user identity verification. However, explored voice authentication models have some limitations related to accuracy and phishing assaults in real-time over wireless network. In research, optimized and privacy-preserving system architecture for effective speaker authentication over a wireless network has been proposed to accurately identify the speaker voice in real-time and prevent phishing assaults over network in more accurate manner. The proposed system achieved very good performance metrics measured accuracy, precision, and recall and the F1 score of the proposed model were98.91%, 96.43%, 95.37%, and 97.99%, respectively. The measured training losses on the epoch 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100 were 2.4, 2.1, 1.8, 1.5, 1.2, 0.9, 0.6, 0.3, 0.3, 0.3, and 0.2, respectively. Also, the measured testing losses on the epoch of 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100 were 2.2, 2, 1.5, 1.4, 1.1, 0.8, 0.8, 0.7, 0.4, 0.1 and 0.1, respectively. Voice authentication over wireless networks is serious issue due to various phishing attacks and inaccuracy in voice identification. Therefore, this requires huge attention for further research in this field to develop less computationally complex speech authentication systems.","PeriodicalId":480212,"journal":{"name":"International journal of recent technology and engineering","volume":"54 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136276839","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}