Elena Togliatti, Cosimo C. Laporta, M. Grimaldi, Olimpia Pitirollo, A. Cavazza, D. Pugliese, D. Milanese, C. Sciancalepore
{"title":"Preparation and Characterisation of PBAT-Based Biocomposite Materials Reinforced by Protein Complex Microparticles","authors":"Elena Togliatti, Cosimo C. Laporta, M. Grimaldi, Olimpia Pitirollo, A. Cavazza, D. Pugliese, D. Milanese, C. Sciancalepore","doi":"10.3390/iocps2021-12019","DOIUrl":"https://doi.org/10.3390/iocps2021-12019","url":null,"abstract":": In this work, new biodegradable composite materials based on poly (butylene adipate terephthalate) (PBAT) reinforced with zein–TiO 2 complex microparticles were prepared and characterised by electron microscopy and tensile and dynamic-mechanical tests. The composite pellets were prepared by solvent casting with different filler contents, namely 0, 5.3, 11.1 and 25 part per hundred resin (phr), to modify and modulate the properties of the final materials. Scanning electron microscopy (SEM) images showed homogeneous dispersion of the filler, without microparticles aggregation or phase separation between filler and matrix, suggesting a good interphase adhesion. According to tensile tests, Young’s modulus showed an improvement in the rigidity and the yield stress presented an increasing trend, with opposite behaviour compared to other composites. Dynamic-mechanical analysis (DMA) results exhibited increasing storage modulus values, confirming a greater rigidity with a higher filler percentage. The glass transition temperature showed a slightly increasing trend, meaning the presence of an interaction between the two phases of the composite materials. Overall, the produced PBAT composites showed similar properties to low-density polyethylene (LDPE), prov-ing to be promising and more sustainable alternatives to traditional polymers commonly adopted in agri-food fields.","PeriodicalId":377741,"journal":{"name":"The 2nd International Online Conference on Polymer Science—Polymers and Nanotechnology for Industry 4.0","volume":"125 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132569201","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Biopolymer-Based Hydrogels for 3D Bioprinting","authors":"A. Fatimi, O. Okoro, A. Shavandi","doi":"10.3390/iocps2021-11284","DOIUrl":"https://doi.org/10.3390/iocps2021-11284","url":null,"abstract":": Three-dimensional (3D) bioprinting is an emerging technology that could be used in the generation of 3D cellular structures for tissue engineering applications. The interest in this technology is due to its capacity to enable the fabrication of precise 3D constructs composed of biomaterials laden with living cells, biomolecules, and nutrients. The process involving the deposition of cell-laden biomaterials or bioinks on a substrate is referred to as bioprinting. This bioprinting process can be used in the fabrication of living tissues and functional organs suitable for transplantation into the human body. Notably, the viability of utilising a bioink for bioprinting is dependent on its functionality, mechanical properties, printability, and biocompatibility. The bioink must also be able to provide cells with a stable environment for attachment, proliferation, and differentiation. To promote the sufficiency of bioinks in 3D bioprinting, several researchers have investigated pathways to enhance ink properties to meet bioprinting requirements, with several synthetic and natural hydrogels developed. These hydrogels are matrices made up of a network of hydrophilic polymers that absorb biological fluids. They can be created from a large number of water-soluble biopolymers including proteins and polysaccharides. The 3D structure of these hydrogels is due to the presence of structural crosslinks that are maintained the environmental fluid. The elasticity of these structures and the presence of a large amount of water enable the hydrogel to adequately mimic biological tissues. Recognising the importance of hydrogels in 3D bioprinting and its potential wide range of tissue engineering applications, the current study therefore investigated major physicochemical parameters that may affect the printability and biocompatibility of biopolymer-based hydrogels. Approaches employed in maintaining structural integrity of the hydrogel, via the application of crosslinking methods, were comprehensively discussed with explorations of the status of the formulation and the use of biopolymer-based hydrogels for 3D bioprinting is also presented. Author Conceptualization, A.F. A.S.; methodology, A.F., A.S. and O.V.O.; valida-tion, A.F., A.S. and O.V.O.; A.F., A.S. and O.V.O.;","PeriodicalId":377741,"journal":{"name":"The 2nd International Online Conference on Polymer Science—Polymers and Nanotechnology for Industry 4.0","volume":"186 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131543838","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Konstantina Chronaki, Angeliki D Mytara, C. Papaspyrides, K. Beltsios, S. Vouyiouka
{"title":"A Novel Treatment Tool for PLA-Based Encapsulation Systems","authors":"Konstantina Chronaki, Angeliki D Mytara, C. Papaspyrides, K. Beltsios, S. Vouyiouka","doi":"10.3390/iocps2021-11268","DOIUrl":"https://doi.org/10.3390/iocps2021-11268","url":null,"abstract":": Active-compound encapsulation in polymeric carriers is a widely used technology as it protects and improves the physical characteristics of the active compound and controls its delivery. The effectiveness of polymeric microcapsules (MCs) depends on the barrier properties of the polymeric shell; for a given polymer, the latter properties are affected by its molecular weight (MW) and crystallinity (x c ). The aim of this study was to modify the MW and x c of the MCs shell via solid state polymerization (SSP). SSP may take place in the amorphous regions of the polymer upon heating at temperatures higher than the glass transition point ( T g ) but lower than the onset of melting ( T m ). Poly(lactic acid) (PLA) was chosen as the polymeric carrier and coumarin 6 as the encapsulated compound. PLA is a biobased and biodegradable polymer that is widely used in drug delivery systems, and coumarin 6 is a fluorescent hydrophobic drug that can be used as model compound. The effectiveness of SSP as a post-encapsulation tool was proven for blank PLA MCs of two molecular weights (MW = 50,000 g mol − 1 and 20,000 g mol − 1 ). SSP led to a 40–50% enhancement of the weight-average molecular weight of the polymeric shell and to an enhancement, from 40% to up to 70%, of the mass fraction crystallinity in the case of the low-MW MCs. In an attempt to transfer the gained knowledge to the encapsulation systems, coumarin-6-loaded MCs were prepared. The average size of the MCs was measured at 502 nm with a polydispersity index of 1.6 while the encapsulation efficiency was found to be 15% for a drug loading of 10%. UV–Vis measurements showed that the compound was fully released after 10 days. Coumarin 6 was found to be thermally stable at temperatures used for SSP, while the study of SSP application in the case of loaded MCs is in progress. Abstract: Active-compound encapsulation in polymeric carriers is a widely used technology as it protects and improves the physical characteristics of the active compound and controls its delivery. The effectiveness of polymeric microcapsules (MCs) depends on the barrier properties of the polymeric shell; for a given polymer, the latter properties are affected by its molecular weight (MW) and crystallinity (x c ). The aim of this study was to modify the MW and x c of the MCs shell via solid state polymerization (SSP). SSP may take place in the amorphous regions of the polymer upon heating at temperatures higher than the glass transition point ( T g ) but lower than the onset of melting ( T m ). Poly(lactic acid) (PLA) was chosen as the polymeric carrier and coumarin 6 as the encapsulated compound. PLA is a biobased and biodegradable polymer that is widely used in drug delivery systems, and coumarin 6 is a fluorescent hydrophobic drug that can be used as model compound. The effectiveness of SSP as a post-encapsulation tool was proven for blank PLA MCs of two molecular weights (MW = 50,000 g mol − 1 and 20,000 g mol − 1 ). SSP led to a 40–","PeriodicalId":377741,"journal":{"name":"The 2nd International Online Conference on Polymer Science—Polymers and Nanotechnology for Industry 4.0","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115673047","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Current Alternatives for In-Can Preservation of Aqueous Paints: A Review","authors":"P. Samyn, Joey Bosmans, P. Cosemans","doi":"10.3390/iocps2021-11245","DOIUrl":"https://doi.org/10.3390/iocps2021-11245","url":null,"abstract":"With the transition towards more sustainable paint formulations based on waterborne 9 environment, the susceptibility for microbial contamination has to be better controlled to increase 10 shelf life and functional lifetime. However, recent restrictions in European regulation on use of bio11 cides have put limitations on the concentrations for traditional systems providing either in-can or 12 dry-film preservation. The commercial technologies for in-can preservation that are currently avail13 able are based on isothiazolines, such as 2-methyl-4-isothiazolin-3-one (MIT), 1,2-benzisothiazolin14 3-one (BIT) and 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT). At present, however, only limited 15 number of alternatives can be used and are reviewed in this presentation. The examples of non16 sensitizing biocidal components for coatings may include quaternary/cationic nitrogen amines, sil17 ver ion or zinc complexes. However, the use of the latter is not without risk for human health. There18 fore, it is believed that disruptive methods will need to be implemented in parallel with more inno19 vative bio-inspired solutions. In particular, the antimicrobial polymers, amino-acid based systems 20 and peptides have similar functions in nature and can offer potential for antimicrobial activities. 21 Also cross-border solutions currently applied in food or cosmetics industries should be considered 22 as examples that need to be further adapted for paint formulations. However, the incorporation in 23 paint formulations remains a challenge in view of the stabilization and rheology control of the sys24 tem. This work’s overview aims to provide different strategies and best evidence for future trends. 25","PeriodicalId":377741,"journal":{"name":"The 2nd International Online Conference on Polymer Science—Polymers and Nanotechnology for Industry 4.0","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122350704","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Lara Velasco Davoise, Rafael Peña Capilla, A. Díez-Pascual
{"title":"Assessment of the Optical Properties of a Graphene–Poly(3-hexylthiophene) Nanocomposite Applied to Organic Solar Cells","authors":"Lara Velasco Davoise, Rafael Peña Capilla, A. Díez-Pascual","doi":"10.3390/iocps2021-11241","DOIUrl":"https://doi.org/10.3390/iocps2021-11241","url":null,"abstract":"","PeriodicalId":377741,"journal":{"name":"The 2nd International Online Conference on Polymer Science—Polymers and Nanotechnology for Industry 4.0","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128393812","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}