{"title":"A physical layer open architecture for communications systems integration: Common baseband processor with multiple-access adaptively steered antenna array","authors":"David K. Mesecher","doi":"10.1109/LISAT.2008.4638943","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638943","url":null,"abstract":"Fighting the Global War on Terrorism and sustaining Homeland Defense requires that todaypsilas military platforms, such as E-2 and Global Hawk, and future platforms such as Joint Strike Fighter, support network-centric operations with advanced on-board sensing and communications capabilities demanding high-gain antenna coverage over a large RF spectrum. In the typical radio system integration seen today, a platform can include several radio functions, including communications terminals and intelligence, surveillance, and recognizance (ISR) receivers and other sensors, each of which is tightly coupled to its own antenna or antenna system. The challenge is that many of these platforms have limited surface for antennas or antenna arrays, so multiple antenna arrays to provide steerable gain for each sensing and communications function is impractical. Moreover, a single antenna array that allows independent beam steering for multiple radio functions using banks of RF switches and mixers at the antenna elements can be even more intractable. This paper will present an open architecture (OA) for the physical layer of radio systems integration in which the digital baseband I/Q signals of every radio function in the system, both transmit and receive, pass through a common baseband digital processor. This architecture allows multiple, independently steered beams to be formed simultaneously, at independent frequencies, from a single antenna array, thereby maximizing the efficient use of the antenna resources of platforms having multiple radio functions. This multiple-access-array capability is achieved by applying separate beamforming weights and separate IF modulations to the digital baseband signal of each radio function in the system.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"312 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116599314","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Electromagnetic environmental effects modeling, simulation & test validation for cosite mitigation — an overview","authors":"R. Pirich, C. Basánez, P. Anumolu","doi":"10.1109/LISAT.2008.4638956","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638956","url":null,"abstract":"Current and future electronic warfare (EW) & intelligence surveillance and reconnaissance (ISR) systems are becoming increasingly more electronically complex with requirements for external antennas and apertures that are susceptible to various sources of electromagnetic interference and compatibility (EMI/EMC). A reduction in EMI may be required in order to ensure interference free operation during active jamming and ISR, as these platforms evolve into more complex, multi-mission ISR networked systems. One of the most difficult EMI/EMC problems that result from integrating many transmitters, receivers and antennas on one platform is cosite EMI. Technologies such as advanced interference cancellation systems, cosite managers, advanced antenna design, and low-loss, multi-port antenna couplers are being investigated to mitigate cosite interference. One type of cosite interference is intermodulation. Intermodulation and intermodulation distortion (IMD) is the result of two or more signals of different frequencies being mixed together, forming additional signals at frequencies that are not, in general, at harmonic frequencies (integer multiples) of either. Sources for intermodulation include amplifiers, mixers, passive devices, antennas structural geometry and nearby objects and selection and corrosion of materials. For antenna systems, a simple approach to this problem is to physically separate the receive antenna from the transmit antenna, on platforms such as aircraft, helicopters, spacecraft, ships, and buildings. However this solution may not be possible due to limited space and other platform constraints. The IMD problem is usually too complex to be accomplished by a single numerical approach because the size of the structure is too large, the material properties and geometries are very complex, the number of parameters are considerable, and range of parameters are very computationally large. Another solution is to develop a cosite interference rejection approach to cancel the coupled power from the interfering coupled signal obtained by the receive antenna. This paper will review very basic to more complicated cosite interference phenomena and approaches to minimize these effects.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132506996","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Plug-in hybrid vehicles: An overview and performance analysis","authors":"P. Anumolu, G. Banhazl, T. Hilgeman, R. Pirich","doi":"10.1109/LISAT.2008.4638946","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638946","url":null,"abstract":"Energy consumption is becoming a more important issue in the United States. High oil prices, volatile political climates, and greater environmental concerns, and awareness to the costs of energy usage have led to an emphasis on conservation. One area where there is increasing research is in increased fuel economy. An area where there are many commercial solutions is hybrid vehicles. As of the end of 2007, over a million hybrid vehicles have been sold worldwide. This widespread adoption has led some to find ways in which to increase hybrid fuel economy. One such means is to augment hybrid vehicles with plug-in technology. Such solutions currently involve people converting commercial hybrid vehicles using inverters, batteries, and reprogrammed computers. These solutions can often increase gas mileage by over 20%. However, it is less clear as to the savings one would achieve economically and environmentally. Here we perform an analysis using the Toyota Prius as a platform.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"109 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125183644","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A middleware framework for external sensor systems","authors":"H. Chin, A.A. Rawana, E. Martin","doi":"10.1109/LISAT.2008.4638954","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638954","url":null,"abstract":"This article proposes a new middleware framework for an external sensor systems to aid the development of a target-tracking algorithm. The target-tracking algorithm uses regression analysis to determine target trajectory. The external sensor system is part of an intelligent vehicle project used to monitor moving targets around a vehicle.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127826452","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A framework for computer forensics investigations involving Microsoft Vista","authors":"D. Hayes, S. Qureshi","doi":"10.1109/LISAT.2008.4638951","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638951","url":null,"abstract":"The technical environment continues to change and impact the work of digital investigations. This research provides a framework within which computer forensics investigators can take advantage of new or different types of evidence from Microsoftpsilas Vista operating system (ldquoVistardquo). Moreover, this paper will also indicate the many challenges that investigators will encounter when faced with the Vista platform. The focus herein will be on changes associated with new security, encryption and file restoration features. These features vary according to the version of Vista and these differences will also be discussed. This research will also detail the integrity of data recovery procedures through detailed experiments used to identify how data could be manipulated by a perpetrator in Vista as compared to previous versions of Microsoftpsilas operating systems. Ultimately, this paper will indicate that enhancements in security and encryption associated with Encrypted File System (EFS) as well as BitLocker Drive Encryption are very problematic for investigators. Vista has serious implications for computer forensics investigations. Nevertheless, this research will guide the digital investigator through the labyrinth of new challenges, to effect a more thorough investigation of digital evidence.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124846578","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Characterization studies on PEM metallic bipolar plates and membrane electrode assembly","authors":"Y. Hung, H. Tawfik, D. Mahajan","doi":"10.1109/LISAT.2008.4638958","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638958","url":null,"abstract":"Metallic bipolar plates seem more appropriate than graphite composite bipolar plate, that is currently considered the industry standard for PEM fuel cell operation. Metallic plates have higher mechanical strength, easier manufacturability, and lower interface contact resistance than graphite composite plates. Metallic and graphite composite plates were tested one thousand hours under normal operating conditions and cyclic loading. After operation, bipolar plates, membrane electrode assembly and byproduct \"water\" samples were collected and tested from both the cathode and anode side of a single cell. Characterization studies were then conducted on aluminum coated bipolar plates with carbide based alloy to examine for any possible chemical changes in the composition of the coating and/or the membrane electrode assembly (MEA) that may affect the stability of the coating, substrate, and/or the ionic conductivity of the cell. Scanning electron microscope (SEM), and energy dispersive X-ray (EDX) analysis were performed on the land and valley surfaces of the reactant flow fields at both the anode and the cathode. The measurements were super imposed to identify the locations and zones of anomalies to conduct further analysis focused on these zones. X-ray diffraction (XRD) analysis were also conducted on samples scraped from the anode and cathode electrodes of the MEA that was also performed for 1000 hrs in metallic bipolar plate fuel cell. Moreover, samples of water as a byproduct produced during the single fuel cells operation were also collected and tested for the existence of chromium, nickel, carbon, iron, sulfur and aluminum using mass spectroscopy analysis technique. The analysis of the EDX measurements indicated the possibility of the dissociation and the dissolution of the nickel chrome that is used as the binder for the carbide based corrosion resistant coating with the substrate. The X-ray analysis yielded the tendency for catalyst growth that could result in power degradation.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125631333","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Understanding the implications of the Patent Reform Act of 2007","authors":"S. Rubin","doi":"10.1109/LISAT.2008.4638944","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638944","url":null,"abstract":"The Patent Reform Act of 2007 is touted as the most significant modification to the Patent Statute in the past 50 years. Its impetus, in theory, is to respond to the \"broken\" patent system, and its goals are to improve patent quality and the patent application process, provide alternatives to litigation for disputes regarding validity and make the U.S. patent system more consistent with patent systems throughout the world. While these are lofty and well-intentioned aspirations, current versions of the bill fail to solve most of these problems and in most instances, the provisions adversely affect other areas of patent law and the patent system itself. A version of the bill passed through the House of Representatives in 2007, and modifications to that version are currently being debated by the Senate. The provisions in the bill, which touch upon many aspects of patent law, include both obvious changes that are clear from the literal language in the proposed statutes and more subtle changes that require certain context to understand their repercussions. This article discusses some of the major highlights of the Patent Act, provides background on the legal issues and offers guidance as to how these changes may impact your company and what you can do. Those highlights include: changing priority claims from a first to invent to a first to file with the Patent Office system affecting the definition of \"prior art\" and \"inventor;\" modifications in the calculations of a damages award in patent cases when damages are based on a royalty of the infringer's profits; creating a new standard for willful infringement that may result in the possibility of enhanced damages being awarded by a court; creating a new, more complex and potentially abusive post grant review process available for the public to challenge issued patents; modifying the locations in the United States where a patent infringement action may be brought; allowing for appeals of rulings articulating the scope of a patent; requiring patent applicants to provide a prior art search report with their patent applications; and creating a new test for inequitable conduct: a breach of the duty of candor imposed on those prosecuting a patent before the Patent Office.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"93 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115230552","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"On the fast generation of long-period pseudorandom number sequences","authors":"I. Dalal, J. Harwayne-Gidansky, D. Stefan","doi":"10.1109/LISAT.2008.4638953","DOIUrl":"https://doi.org/10.1109/LISAT.2008.4638953","url":null,"abstract":"Monte Carlo simulations and other scientific applications that depend on random numbers are increasingly implemented in parallel configurations in programmable hardware. High-quality pseudo-random number generators (PRNGs), such as the Mersenne Twister, are based on binary linear recurrence equations. They have extremely long periods (more than 21024 numbers generated before the entire sequence repeats) and well-proven statistical properties. Many software implementations of such dasialong-periodpsila PRNGs exist, but hardware implementations are rare. We develop optimized, resource-efficient parallel architectures for long-period PRNGs that generate multiple independent streams by exploiting the underlying algorithm as well as hardware-specific architectural features.","PeriodicalId":348455,"journal":{"name":"2008 IEEE Long Island Systems, Applications and Technology Conference","volume":"173 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125795286","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}