Y. Perera-Mercado, G. C. León, Geanette Polanco Pinerez
{"title":"Porous Ceramic Sensors: Hydrocarbon Gas Leaks Detection","authors":"Y. Perera-Mercado, G. C. León, Geanette Polanco Pinerez","doi":"10.5772/INTECHOPEN.72315","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.72315","url":null,"abstract":"According to the American National Standards Institute (ANSI), a sensor is a device which provides a usable output in response to a specified measurement of a physical quantity converted into a signal suitable for processing (e.g., optical, electrical, or mechanical signals). On the other hand, porous ceramic materials play an important role as sensor materials, because by selecting a suitable base ceramic material for the intended use and then adjusting their overall porosity, pore size distribution, and pore shape, they can cover different applications such as liquid-gas filters, insulators, catalytic supports, mixed of gases separators and sensors, among others. In addition, they have controlled permeability, high melting point, high superficial area, high corrosion and wear resistance, low expansion coefficient, tailored electronic properties, etc. Currently, a few niche areas demand sensors for compact electronic device design, e.g., leak inspections for oil and gas dispositive, flammable and/or toxic gas detection in waste storage areas and confined spaces, hydrocarbons and their associated gas detection at low temperatures and high humidity conditions, among others. In this chapter, the advances in porous ceramic production for hydrocarbons and associated gas detection will be presented and discussed.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116475633","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Introductory Chapter: A Brief Introduction to Porous Ceramic","authors":"U. Al-Naib","doi":"10.5772/INTECHOPEN.74747","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.74747","url":null,"abstract":"Porous ceramics have grown in importance in the industry recently because of their many applications like filters, absorbers, dust collectors, thermal insulation, hot gas collectors, dielectric resonators, bioreactors, bone replacement and automobile engine components [1–4]. Generally, porous ceramics have good properties such as mechanical strength, abrasion resistance, chemical and thermal stability. These porous network ceramic structures also have relatively low density, low mass and low thermal conductivity [5]. Furthermore, permeability is one of the most important properties of porous ceramics for different applications such as membranes because this property directly relates to the pressure drop during filtration. Pore size control is the one key factor in fabrication of porous ceramics [6]. As well as the size of particles and their distribution of the raw materials, manufacturing techniques, types of binder used, distribution of binder and sintering affect the final porosity and pore connectivity important factors that must be considered during the manufacturing of the porous ceramic body. Therefore, the development of porous ceramics research requires sufficient mechanical and chemical stability as well as permeability. This book covers a wide range of topics such as porous ceramic structure and properties, preparation, simulation and fabrication, 3D printer fabrication, porous ceramic composites, honeycombs, membranes, bioceramic, automotive and aerospace porous ceramic.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124565383","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Zinc-Tin-Oxide-Based Porous Ceramics: Structure, Preparation and Properties","authors":"T. Ivetić","doi":"10.5772/INTECHOPEN.71581","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.71581","url":null,"abstract":"Zinc-tin-oxide-based ceramics have been extensively investigated especially regarding the synthesis of zinc stannate (Zn 2 SnO 4 ), a spinel structure ternary compound with a wide range of possible applications. Among all of those, the best-known use of this material is in the combustion gas and moisture sensors. This chapter presents the research results review on the structure, morphology, and properties of mechanochemically syn- thesized Zn 2 SnO 4 ceramics with large open porosity, as well as the results obtained during its solid-state processing optimization. Also shown is the review of the results obtained in the study of the influence of addition of the small amounts of bismuth oxide (Bi 2 O 3 ) on the obtained Zn 2 SnO 4 structure, microstructure, and electrical properties, as it provides the condition for the liquid phase sintering and creates a new dynamics in the zinc-tin-oxide reaction sintering process.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"269 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122700689","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Physical Properties of Porous Pure and Zr/Sn-Doped Nanocrystalline BaTiO3 Ceramics","authors":"U. Ahmadu, A. Muazu, S. Umar","doi":"10.5772/INTECHOPEN.75500","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.75500","url":null,"abstract":"Polycrystalline BaTiO 3 and Ba(Ti 0.96 SnxZr 0.04-x )O 3 ceramics (x = 0.02-0.04) were prepared by a combination of solid-state and mechanochemical process and characterized at room temperature by X-ray diffraction for phase composition. Their crystal structures were found to be of the cubic and tetragonal symmetries, respectively. The grain size and porosity which were determined using Field Emission Scanning Electron Microscope (FESEM) and densi- tometer, respectively showed decrease and increase of relative density respectively, with increase in doping concentration. The variations of dielectric constant and loss with fre- quency and temperature show a maximum dielectric constant of 1660 at room temperature for Ba(Ti 0.96 Sn 0.03 Zr 0.01 )O 3 . The remnant polarization (P r ) and coercive field (E c ) of BT were found to be 581.73 V/cm and 0.27 μ C/cm 2 . Increase in Sn content led to an increase in Pr of 0.58, 3.07, 3.73 C/cm 2 , and Ec of 1766.8, 2855.7, 2661.1 V/cm, respectively and are expected to lead to a significant reduction in the thickness of the multilayer ceramic capacitors. Imped- ance spectroscopy of polycrystalline Ba (Ti 0.96 Sn 0.02 Zr 0.02 ) O 3 in a wide frequency and temperature range showed Nyquist plots with presence of grain and grain boundary at 400 (cid:1) C and a negative temperature coefficient of resistance (NTCR) for Ba(Ti 0.96 Sn 0.02 Zr 0.02 )O 3 . The dielectric relaxation showed a non-Debye character.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123736630","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Mechanical Properties of Porous Ceramics","authors":"V. R. Salvini, V. Pandolfelli, D. Spinelli","doi":"10.5772/INTECHOPEN.71612","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.71612","url":null,"abstract":"It is widely known that increasing interest in porous ceramics is due to their special properties, which comprise high volumetric porosity (up to 90%) with open or closed pores, and a broad range of pore sizes (micropores: d < 2 nm; mesopores: 50 nm > d > 2 nm and macropores: d > 50 nm). These properties have many uses comprehending macroscaled devices, mesoscaled materials and microscaled pieces. During their usage, these materials are usually submitted to thermal and/or mechanical loading stresses. Therefore, it is a premise to understand how these porous structures behave under thermomechanical stresses to design materials that show adequate properties for the required application. In this context, the aim of this chapter is to review the mechanical properties of macroporous ceramics.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132237665","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Shock Compression of Porous Ceramics","authors":"Yin Yu, Hongliang He","doi":"10.5772/INTECHOPEN.72246","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.72246","url":null,"abstract":"Shock compression is a challenge for porous ceramics in application. In this chapter, numerical simulation and experimental observation have been introduced, which reveals generation of crack, damage, and fracture within porous ceramics upon shock wave loading. Simulation of a two-dimensional lattice-spring model explains the effects of voids and grain boundaries on the mesoscopic deformation features of shocked porous ceramics. Experiments confirm the fracture and fragmentation evolution in the post-shock ceramics. These understandings are conducive to the design, manufacture and usage of the porous ceramics under rapid impulsive loading. Furthermore, the concept of controllable fracture is proposed, which is a strategy to modulate the propagation of shock fracture in porous ceramics for the avoidance or delay of the shock-induced functional failure. It is evidenced that a “shielded region,” i.e., free of severe shock fracture, could be formed with the sacrifice of a “damaged region” in the porous ceramics.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"85 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128435772","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Preparation and Numerical Modelling of Ceramic Foam Insulation for Energy Saving in Buildings","authors":"Ru Ji, Xidong Wang, Yang He","doi":"10.5772/INTECHOPEN.71393","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.71393","url":null,"abstract":"For the purpose of energy saving in buildings, a foam ceramic insulation (FCI) was pre- pared by using fly ash (FA) and ceramic waste (CW) as the main raw materials for its matrix part and foam part, respectively. The effects of the sintering temperature and the additive agent on the macroscopic performances were systematically measured and investigated. The experiment results indicate that for the matrix sample 5% quartz addi - tion makes the rupture modulus at 1200°C reach high to 34.28 MPa, while the corresponding water absorption capacity is only 0.83%. In addition, for the foam sample with 1 wt% silicon carbide, the lowest measured bulk density and thermal conductivity at 1200°C are 0.471 g/cm 3 and 0.1184 W/(m•K), respectively. Furthermore, the proposed simulation model predicts that the effective thermal conductivity of FCI decreases with the decrease of the bulk density. Moreover, the simulation results calculated by EnergyPlus software indicate that the synthetic FCI can efficiently reduce the building’s heating and cooling loads and exerts excellent energy conservation effect.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127744872","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Processing of Ceramic Foams","authors":"Xiaojian Mao","doi":"10.5772/INTECHOPEN.71006","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.71006","url":null,"abstract":"The ceramic foams have great importance in many industry fields. This chapter introduces the processing of ceramic foams by direct foaming technology. The structure of the precursor foams which attributes the final properties of the ceramic foams is described. Two different methods for foaming the ceramic slurry, as well as the techniques for foam consolidation, are presented in detail.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116859347","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Biomimetic Porous Bone-Like Apatite Coatings on Metals, Organic Polymers and Microparticles","authors":"Takeshi Yabutsuka","doi":"10.5772/INTECHOPEN.71390","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.71390","url":null,"abstract":"When pH and temperature of simulated body fluid (SBF) are raised, fine particles of cal - cium phosphate are precipitated. Recently, the authors’ research group found that these fine particles were highly active to induce formation of porous bone-like apatite in SBF, or body fluid, and named them ‘apatite nuclei.’ By using apatite nuclei, the author suc cessfully imparted high bioactivity, that is, apatite-forming ability, to various kinds of bioinert biomaterials such as metals and organic polymers in a series of recent studies. These materials spontaneously formed porous bone-like apatite layer on their surfaces in SBF in a short time and showed high bioactivity in vitro. In addition, thWe author also successfully fabricated microcapsules consisted of porous bone-like apatite by using apatite nuclei.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116489450","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Microwave Plasmas as a Processing Tool for Tailoring the Surface Properties of Ceramic Coatings","authors":"E. Ekoi, M. Awais, D. Dowling","doi":"10.5772/INTECHOPEN.71686","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.71686","url":null,"abstract":"This chapter reviews the use of low pressure microwave plasmas as a processing technology for both sintering and controlling the surface chemistry of porous ceramic coatings. A particular advantage of microwave processing is its ability to penetrate the surface of the workpiece; enabling rapid volumetric heating and thus reducing the need for external heat sources. The microwave plasma treatments have the ability to sinter materials in minutes rather than the hours taken using conventional furnace processing. This study provides examples of the use of these plasmas to sinter both nickel and titanium nanoparticles. These are used in the fabrication of electrodes for use in dye sensitized solar cells. Further applications of the microwave plasma treatments investigated is for their use in heat treatment to control crystalline phase transitions, as well as a rapid technique to oxidize metal surfaces.","PeriodicalId":336795,"journal":{"name":"Recent Advances in Porous Ceramics","volume":"754 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123278765","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}