{"title":"Characterisation of Saw Dust Ash – Quarry Dust Bituminous Concrete","authors":"K. M. Oba, Emmanuel Ledesi Tigbara","doi":"10.31033/IJEMR.11.1.17","DOIUrl":"https://doi.org/10.31033/IJEMR.11.1.17","url":null,"abstract":"This study evaluates usefulness of Quarry Dust and Saw Dust Ashas mineral fillers in a bituminous concrete in order to reduce cost and encourage reuse of waste materials in the environment. Bituminous concrete blends were generated with 4% Quarry Dust and 4% Saw Dust Ash replacements of aggregates. The binder contents were 3, 3.5, 4, 4.5 and 5% for a 60/70 penetration grade bituminous binder. Briquette specimens were formed using the five different bituminous concrete blends. Standard laboratory experiments were conducted on the aggregates, Quarry Dust, Saw Dust Ash, bituminous binder and bituminous concrete specimens based on the relevant codes and standards. The Marshall method was used for the bituminous concrete design procedure. The optimum binder content was found to be 4.88% using the standard Marshall curves. At optimum binder content, using 4% design air void for medium traffic and maximum aggregate of 10mm, the Stability, Flow, VMA and VFA were 8.15kN, 8.28(0.25mm), 15.22% and 74.2% respectively. These were found to have passed the Asphalt Institute design criteria.","PeriodicalId":336776,"journal":{"name":"ArchRN: Technology (Topic)","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-02-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115973142","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The Implication of Significant Number in Geodetic Computations: Geometric Geoid Model of Fct Abuja as a Case Study","authors":"P. D. Oluyori, Eteje S. O.","doi":"10.7176/jstr/6-08-09","DOIUrl":"https://doi.org/10.7176/jstr/6-08-09","url":null,"abstract":"The position occupied by the geoid in the computation of orthometric height (H) from GNSS observations is crucial and hence requires the geoid model parameters obtained with the application of least squares technique, be approximated to a reasonable number of significant figures in its (geoid) modelling to enable a high-resolution geometric geoid, be determined. As a result, this study presents the implication of significant number in geodetic computations using geometric geoid model of FCT, Abuja as a case study. The number of significant figures of the model parameters was varied, starting from 6 to 22 significant figures to enable the Root Mean Square Errors (RMSEs), as well as the accuracy of the model, be obtained at the varied numbers of significant figures. The obtained results show that the highest accuracy of the model is obtained if the model parameters are approximated to a reasonable number of significant figures. Keywords: geometric, geoid, height, significant, figure, geodetic, computation, modelling DOI: 10.7176/JSTR/6-08-09","PeriodicalId":336776,"journal":{"name":"ArchRN: Technology (Topic)","volume":"272 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116527185","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of WC-Feal Composite by Stir Casting Method","authors":"Rahul Verma, R. Srivastava","doi":"10.31033/IJEMR.9.2.5","DOIUrl":"https://doi.org/10.31033/IJEMR.9.2.5","url":null,"abstract":"In this paper author make an effort to develop a new material for fulfill the need of present requirement. This material is developed by the using of stir casting method. A AMMC’s composite are developed to fulfill the need of present requirements. This composite material is prepared by the use of 3 metals. These metals are iron (Fe), aluminum (Al) and tungsten carbide (WC).Thus this composite come under metal matrix composite. This composite is WC – FeAl composite. This is prepared by the use of stir casting method. The base metals are iron and aluminum. These are having equal quantity by weight. In this the sample is prepared by the change the of percentage reinforcement. This is varying from 0 to 3%. A test is conduct to check their tensile strength as well as compressive strength. By these test it is confirm that with the increase the percentage of reinforcement in the composite their tensile strength is decrease but their compressive strength is increase.","PeriodicalId":336776,"journal":{"name":"ArchRN: Technology (Topic)","volume":"2006 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-04-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117043446","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}