{"title":"Comparative Analysis of Bioethanol Production from Different Potential Biomass Sources in the Philippines","authors":"K. Gatdula, R. Demafelis, B. G. Bataller","doi":"10.5772/INTECHOPEN.94357","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.94357","url":null,"abstract":"To pursue the continuous implementation of the bioethanol blending mandate by the Philippine Biofuels Law, part of the roadmap of the National Biofuels Board (NBB) through the Department of Energy (DOE) is to find a sustainable feedstock. This is due to the deficit in locally produced bioethanol as there is an insufficient supply of currently used feedstock, sugarcane. There are several biomasses available in the country with components viable for ethanol fermentation. Aside from sugarcane, these include sweet sorghum and cassava (first-generation), rice straw and corn stover (second-generation), and macroalgae (third-generation). Among which, sweet sorghum can be considered as the best complementary feedstock to sugarcane as its syrup can be directly fermented to produce bioethanol. Considering its maximum bioethanol potential yield of 100 L/ton for two croppings annually, a comparably low production cost of PhP 36.00/L bioethanol was estimated, competitive enough with the PhP33.43/L bioethanol from sugarcane. Aside from finding a promising feedstock, the bioethanol production volume in the country must be increased to meet the demand through either working on the optimum processing conditions to increase the capacity utilization from the current 77.9% or through installation of additional distilleries.","PeriodicalId":294356,"journal":{"name":"Bioethanol [Working Title]","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-02-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124371036","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Occupational Health Issue in a 2G Bioethanol Production Plant","authors":"B. Pietrangeli, R. Lauri","doi":"10.5772/INTECHOPEN.94485","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.94485","url":null,"abstract":"The interest of scientists and health authorities in occupational risk related to biofuels production has recently increased due to the development of agro-industrial waste recycling processes in the framework of the European circular economy strategy and energy production from renewable sources. A common biofuel is the bioethanol, which is a leading candidate to substitute the gasoline as a transport fuel and it can be produced via biomass fermentation process. In biofuels production plants, some work activities in processing of biomass, are sources of airborne dust and the employers should demonstrate that adequate control measures have been implemented in order to prevent workers exposure. In the chapter, the production process of a 2G bioethanol plant has been analyzed in order to specify the process phases, which could generate occupational health issue related to airborne dust, and to provide technical recommendations.","PeriodicalId":294356,"journal":{"name":"Bioethanol [Working Title]","volume":"68 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-01-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121091530","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An Attempt in Blending Higher Volume of Ethanol with Diesel for Replacing the Neat Diesel to Fuel Compression Ignition Engines","authors":"P. Balasubramanian","doi":"10.5772/INTECHOPEN.95263","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.95263","url":null,"abstract":"Alcohols are renewable in nature and can be manufactured from biomass. Butanol a higher alcohol, can be utilized as co-solvent to prevent the phase separation of diesel-ethanol blends as per the previous researches.. This experimentation has been conducted with the blends of diesel-ethanol with various proportions of n-butanol followed by the solubility test in the temperature range of 5–25°C. The results indicate that 45% of ethanol can be blended with diesel by the assistance of 10% of n-butanol to make the final blend stable up to a temperature of 5°C for 20 days, which met the requirements of the essential properties (ASTM). Existing diesel engine has been modified as per the optimal level of parameters such as intake air temperature (IAT), fuel injection timing (FIT), nozzle opening pressure (NOP) and compression ratio (CR) obtained using Taghuchi method of L9 orthogonal array. Arrived out parameters are 75°C of IAT, 29°before top dead centre of FIT, 210 bar of NOP and 19: 1 of compression ratio. The implementation of these parameters in diesel engine and fueling with diesel-ethanol butanol blend containing 45% ethanol produced closer performance and emissions characteristics compared to that of diesel. However, the emissions of smoke, hydrocarbon and carbon monoxide produced by the optimal blend are found to be marginally higher compared to that of diesel. These can be ratified by the introduction of after treatment systems modifications.","PeriodicalId":294356,"journal":{"name":"Bioethanol [Working Title]","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-12-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130659408","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Bioethanol Production: An Overview","authors":"Ifeanyichukwu Edeh","doi":"10.5772/INTECHOPEN.94895","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.94895","url":null,"abstract":"Bioethanol is currently being considered as a potential replacement for the conventional gasoline, especially as it possesses similar and some superior qualities enabling reduction in GHG and increases fuel reserve. Bioethanol used for commercial purposes is usually produced from edible feedstocks such as corn and sugar cane which increases the production cost. The high cost of these feedstocks is the driving force behind the search for the second, and third generations (3G) bioethanol produced from cheaper and available feedstocks. The fourth-generation bioethanol is being developed to further advance the 3G bioethanol to enhance the potential of algae to capture CO2 and to increase the production of specific compounds. Despite the efforts been made to reduce the cost of production through the use of diverse non-edible feedstocks, the cost of processing the feedstocks is still very high, thereby making bioethanol uncompetitive with the conventional gasoline. The life cycle assessment and techno-economic analyses are usually conducted to assess the economic feasibility and the environmental impact of the bioethanol production processes. This chapter thus, covers the State-of-the-art processes involved in bioethanol production including pretreatment, hydrolysis, fermentation processes, bioethanol recovery, integrated processes, Life cycle assessment, techno-economic analysis, exergy analysis and process simulation.","PeriodicalId":294356,"journal":{"name":"Bioethanol [Working Title]","volume":"58 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-12-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124716918","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Ethanol Production, Current Facts, Future Scenarios, and Techno-Economic Assessment of Different Biorefinery Configurations","authors":"J. D. C. Medina, A. I. Magalhães","doi":"10.5772/intechopen.95081","DOIUrl":"https://doi.org/10.5772/intechopen.95081","url":null,"abstract":"Currently, the continuous depletion of non-renewable resources of fuels and chemicals has promoted the research and development of different alternatives for the replacement of fossil resources as the feedstock of fuels and chemicals. At present, one of the most important biofuels in the current economy, is bioethanol, contributing to 65% of the total biofuels production. The production of bioethanol is an attractive alternative because it would be produced using indigenous and native raw material, therefore, the socioeconomic impact mainly in developing countries would be measured by the economic incomes and increase the quality of life of small and middle farmers. The first-generation ethanol production from sugarcane, corn, or beet sugar is broadly implemented at an industrial scale. However, the second-generation ethanol (2GE) is currently still in development stages, looking for different alternatives according to each region under study. The 2GE is also subject of diverse opinions about its economic viability and its real impact on the environment, especially due to the CO2 footprint. Consequently, this chapter has presented an overview of 2GE production, the possibilities of co-production of molecules of high value-added, and their economic and environmental assessment, including CO2 release, water consumption, solid residues disposal, and economic analysis to determine the best bioethanol based biorefinery configuration.","PeriodicalId":294356,"journal":{"name":"Bioethanol [Working Title]","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125419540","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. M. Khandaker, U. Abdullahi, M. Abdulrahman, N. A. Badaluddin, K. S. Mohd
{"title":"Bio-Ethanol Production from Fruit and Vegetable Waste by Using Saccharomyces cerevisiae","authors":"M. M. Khandaker, U. Abdullahi, M. Abdulrahman, N. A. Badaluddin, K. S. Mohd","doi":"10.5772/intechopen.94358","DOIUrl":"https://doi.org/10.5772/intechopen.94358","url":null,"abstract":"Waste from the food is a challenge to the environment all over the globe, hence there is need to be recycled. Vegetables and fruits biomass is a resource of renewable energy with significant fuel source potential for the production of electricity and steam, fuel for consumption and laboratory solvents. Bioethanol derived from biomass contributed 10–14% of the total world energy supply and solved the world crisis such as global warming and depletion of fossil fuel. Presently, bioethanol is a global issue on the efforts to reduced global pollution, contributed significantly by the petroleum or diesel combustion or combination of both. Vegetables and fruits waste significantly contains high sugar which can be utilized and serve as a raw material in the production of renewable energy using Saccharomyces cerevisiae. Though 80% of the current bioethanol are generated from edible materials such as starch and sugar. Biomass from lignocellulosic gathered more attention recently. The objective of this review is to account for the procedures involved in the production of bioethanol from biomass of fruits and vegetable waste through a fermentation process using Saccharomyces cerevisiae. In this chapter, we discussed the biomass preparation and fermentation techniques for bioethanol and reviewed the results of different fruits and vegetable waste. We found pineapple and orange fruit biomass contain a higher amount of bioethanol and easier to extract than the other fruit and vegetable wastes. Recent review coined out that dry biomass of fruit and vegetable is a promising feedstock in the utilization of bioethanol production.","PeriodicalId":294356,"journal":{"name":"Bioethanol [Working Title]","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127193708","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
O. A. Vergel, Dolores Cárdenas, R. García-Contreras, C. Mata
{"title":"Bioethanol-Diesel Blends Used in Diesel Engines and Vehicles under Transient Operation","authors":"O. A. Vergel, Dolores Cárdenas, R. García-Contreras, C. Mata","doi":"10.5772/intechopen.94359","DOIUrl":"https://doi.org/10.5772/intechopen.94359","url":null,"abstract":"This book chapter describes, the experiences of different experimental works related to the study of the effect of bioethanol-diesel fuel blends directly used on a study about the integrity of some parts of a diesel injection system, and on performance and regulated emissions of engines and/or vehicles under different transient conditions. The experiences described are carried out in an engine test bench, two public busses under urban transportation and a construction machine in an actual railway construction. A bioethanol-diesel fuel blend with 10% v/v of bioethanol was used for engine testing to study the potential effect on performance and emissions. Later, a blend with around 8% v/v of alcohol concentration was selected to carry out the experimental work with an injection system and with busses and construction machinery. This work points out the most important advantages and disadvantages of the use of bioethanol blended with diesel fuel. The most important strength is the potential of these fuel blends for reducing particle matter without penalty in nitrogen oxides emissions. As main weakness can be cited the need for adding a stabilizer additive which restricts the desirable increase of bioethanol content in the blend.","PeriodicalId":294356,"journal":{"name":"Bioethanol [Working Title]","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130425250","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}