{"title":"Stability on the GMAW Process","authors":"Elina Mylen Montero Puñales, S. C. Alfaro","doi":"10.5772/INTECHOPEN.90386","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.90386","url":null,"abstract":"The gas metal arc welding (GMAW) process is highly used in industrial production; therefore great efforts are made to select the appropriate procedure to ensure the highest quality. An area of study directly correlated to the quality of GMAW and widely studied is the control of process stability. The objective of this chapter is to present a bibliographical review of the scientific literature related to qualitative and quantitative indexes to evaluate the stability of the GMAW process. The documents present a compilation of the factors that affect stability, stability indexes, and, finally, a synthesis of the study. With a review of the literature, it was concluded that the highest percentage of investigation was aimed at the study of metal transfer stability, specifically with the short-circuit transfer mode. It is also evident that the main processing techniques to develop the indexes were the mathematical formulation; the statistical analysis; image processing; and monitoring of acoustic signals. In this text, the discussion surrounds the papers, the thesis, and other documents found on the theme.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124143635","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Online Measurements in Welding Processes","authors":"G. A. Bestard","doi":"10.5772/intechopen.91771","DOIUrl":"https://doi.org/10.5772/intechopen.91771","url":null,"abstract":"The online measurement of principal magnitudes in welding processes is important to close the control loop and meet the project requirements. But, it is difficult because of the adverse environmental conditions that exist near the weld pool. Some conventional measurement techniques are used, but under these conditions, indirect sensing techniques are a better option. Sensor fusion algorithms and indirect sensing techniques allow estimate magnitudes that are impossible to measure directly. Sensor fusion is used to describe the static and dynamic behavior of process variables and is based on several areas of knowledge, such as statistics and artificial intelligence. By combining different sensing technologies to take advantage of each one, it is possible to obtain better sensing results. In this chapter selected sensing techniques and estimation algorithms used online for collecting values on the welding process are shown. Special attention is given to sensor fusion techniques. Some real applications and innovative research results are discussed.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-12-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133137048","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Vacuum Brazing of Dissimilar Joints Mo-SS with Cu-Mn-Ni Brazing Filler Metal","authors":"Maksymova Svitlana","doi":"10.5772/intechopen.92983","DOIUrl":"https://doi.org/10.5772/intechopen.92983","url":null,"abstract":"The complexity of joining dissimilar materials, such as molybdenum-stainless steel, is due to the difference in thermal coefficients of linear expansion and low oxidation resistance of molybdenum. In this connection, brazing of this pair of materials should be performed in vacuum. The selection of chemical composition of brazing filler metal and its melting temperature range is very important. This work presents the results of metallographic and micro X-Ray spectral analysis investigations of dissimilar brazed joints of molybdenum-stainless steel and shows the features of the formation of brazed seams at application of brazing filler metals of Cu-Mn-Ni(Me) system. It is found that at brazed seam, crystallize reaction layers form the side of molybdenum. One layer is based on molybdenum, enriched in iron and silicon. The second layer is based on iron, enriched in silicon. At brazing temperature of 1100°C, base metal dispersion occurs, which can be avoided at temperature lowering to 1084°C. The structure of solid solution with a small amount of iron-enriched dispersed phase crystallizes in the central zone of brazed seams. The brazed joints produced with application of brazing filler metal based on Cu-Mn-Ni system are characterized by maximum values of shear strength.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133523372","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Soundararajan, JITHIN VISHNU, Geetha Manivasagam, N. Muktinutalapati
{"title":"Heat Treatment of Metastable Beta Titanium Alloys","authors":"S. Soundararajan, JITHIN VISHNU, Geetha Manivasagam, N. Muktinutalapati","doi":"10.5772/INTECHOPEN.92301","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.92301","url":null,"abstract":"Heat treatment of metastable beta titanium alloys involves essentially two steps—solution treatment in beta or alpha+beta phase field and aging at appropriate lower temperatures. High strength in beta titanium alloys can be developed via solution treatment followed by aging by precipitating fine alpha (α) particles in a beta (β) matrix. Volume fraction and morphology of α determine the strength whereas ductility is dependent on the β grain size. Solution treatment in (α + β) range can give rise to a better combination of mechanical properties, compared to solution treatment in the β range. However, aging at some temperatures may lead to a low/nil-ductility situation and this has to be taken into account while designing the aging step. Heating rate to aging temperature also has a significant effect on the microstructure and mechanical properties obtained after aging. In addition to α, formation of intermediate phases such as omega, beta prime during decomposition of beta phase has been a subject of detailed studies. In addition to covering these issues, the review pays special attention to heat treatment of beta titanium alloys for biomedical applications, in view of the growing interest this class of alloys have been receiving.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-05-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126772186","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Strengthening of High-Alloy Steel through Innovative Heat Treatment Routes","authors":"N. Kisku","doi":"10.5772/intechopen.91874","DOIUrl":"https://doi.org/10.5772/intechopen.91874","url":null,"abstract":"Heat treatment route is an important route for the development of high-strength alloy steel. Many heat treatment processes are applied depending on alloy compositions and desired mechanical properties. There are various high-strength alloy steels, namely, austenitic stainless steel (16–26 wt%Cr, 0.07–0.15 wt%C, 8–10 wt%Ni, rest Fe), where the heat treatment adopted is the low-temperature plasma nitriding so as to achieve a strength in a range of 800–1000 MPa. In twinning-induced plasticity (TWIP) steel (>20 wt%Mn, <1 wt%C, <3 wt%Si, <3 wt%Al, rest Fe), high-temperature thermomechanical heat treatment provides a strength greater than 1000 MPa. High-speed steel (18 wt%W, 4 wt%Cr, 1 wt%V, 0.7 wt%C, 5–8 wt%Co, rest Fe) suits best for high-speed machining purpose, owing to secondary hardening. Besides, high-temperature annealing is performed with majorly ferritic structure to achieve a maximum bending strength of 4700 MPa. Furthermore, in Hadfield steel (11–14 wt%Mn, 1–1.4 wt%C), a fully austenitic phase is obtained with a strength level of 1000 MPa. High-alloy tool steel (5 wt%Mo, 6 wt%W, 4 wt%Cr, 0.3 wt%Si, 1 wt%V, rest Fe) is provided with austenitizing, quenching, and tempering treatment to achieve a maximum hardness of 1200–1400 HV.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-04-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132723421","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Vivas, D. San-Martín, Francisca G. Caballero, C. Capdevila
{"title":"High-Chromium (9-12Cr) Steels: Creep Enhancement by Conventional Thermomechanical Treatments","authors":"J. Vivas, D. San-Martín, Francisca G. Caballero, C. Capdevila","doi":"10.5772/intechopen.91931","DOIUrl":"https://doi.org/10.5772/intechopen.91931","url":null,"abstract":"There is a worldwide need to develop materials for advanced power plants with steam temperatures of 700°C and above which have the capacity to achieve high efficiency and low CO2 emissions. This request involves the development of new grades of 9-12Cr heat-resistant steels, with a nanostructured martensite, mainly focusing on the long-term creep rupture strength of base metal and welded joints, creep-fatigue properties, and microstructure evolution during exposure at such elevated temperatures. The main shortcomings of actual 9-12Cr high-chromium steels are that the creep resistance is not enough to fulfill the engineering requirements at temperatures higher than 600°C and the material undergoes a cyclic softening. Creep strength at high temperature could be improved by a microstructural optimization through nano-precipitation, guided by computational thermodynamics, and thermomechanical control process optimization.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"73 24","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-04-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134197233","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Data Analysis and Modeling Techniques of Welding Processes: The State-of-the-Art","authors":"Rogfel Thompson Martínez, S. C. Alfaro","doi":"10.5772/INTECHOPEN.91184","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.91184","url":null,"abstract":"Information contributes to the improvement of decision-making, process improvement, error detection, and prevention. The new requirements of the coming Industry 4.0 will make these new information technologies help in the improvement and decision-making of industrial processes. In case of the welding processes, several techniques have been used. Welding processes can be analyzed as a stochastic system with several inputs and outputs. This allows a study with a data analysis perspective. Data mining processes, machine learning, deep learning, and reinforcement learning techniques have had good results in the analysis and control of systems as complex as the welding process. The increase of information acquisition and information quality by sensors developed at present, allows a large volume of data that benefits the analysis of these techniques. This research aims to make a bibliographic analysis of the techniques used in the welding area, the advantages that these new techniques can provide, and how some researchers are already using them. The chapter is organized according to some stages of the data mining process. This was defined with the objective of highlighting evolution and potential for each stage for welding processes.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121435134","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Overview of Selected Issues Related to Soldering","authors":"K. Dušek, D. Bušek, P. Veselý","doi":"10.5772/intechopen.91023","DOIUrl":"https://doi.org/10.5772/intechopen.91023","url":null,"abstract":"The formation of defects and imperfections in the soldering process can have many causes, which primarily include a poorly setup technological process, inappropriate or inappropriately used materials and their combinations, the effect of the surroundings and design errors. This chapter lists some examples of errors that can occur in soldering, while review is devoted to selected defects: non-wettability of the solder pads, dewetting, wrong solder mask design, warpage, head-in-pillow, cracks in the joints, pad cratering, black pad, solder beading, tombstoning, dendrites, voids, flux spattering from the solder paste, popcorning and whiskers.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-02-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121271038","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Grain Boundary Effects on Mechanical Properties: Design Approaches in Steel","authors":"G. Bhargava","doi":"10.5772/intechopen.88564","DOIUrl":"https://doi.org/10.5772/intechopen.88564","url":null,"abstract":"For Poly-crystalline metals, Grain boundary design plays an important role to achieve desired mechanical properties in the final product form which may be a hot rolled or cold rolled coil. The fundamental mechanical properties are yield and tensile strengths, elongation and formability where grain refinement is particularly attractive mechanism for property design. Grain boundary strengthening provides benefits both in terms of fracture toughness and mechanical behavior at lower temperatures particularly in case of hot rolled high strength structural and line pipe steels. For cold rolled steels, grain boundary effects play a crucial role in critical automotive application steels such as Bake Hardening Index in Bake-hardening Steels. Additionally, deep drawability and formability characteristics are also strongly dependent upon grain size. Mechanical properties in steels are controlled majorly by two techniques - chemical composition and Steel processing parameters. Through first method of chemical composition control, during hot rolling, the control of austenite grain size is accomplished, alongside retardation of phase transformation to lower temperature. In second method, steel manufacturing process parameters i.e. hot rolling and coil cooling parameters, cold reduction, and subsequent heat treatment parameters such as annealing play an important role.","PeriodicalId":283733,"journal":{"name":"Welding - Modern Topics","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125335616","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}