{"title":"Reducing the systematic error of the average fluid flow rate in axisymmetric computer model of piezoelectric micropump","authors":"I. Nasibullayev","doi":"10.21662/mfs2021.1.004","DOIUrl":"https://doi.org/10.21662/mfs2021.1.004","url":null,"abstract":"Mathematical and computer models of an axisymmetric coupled problem of interaction of a fluid and an elastic body for the solving partial differential equations by the finite element method FreeFem ++ software are proposed. In these models, periodic vibrations of annular piezoelectric actuators placed on an elastic tube of circular cross-section lead to radial deformations of the tube. With a synchronous oscillation of the system of piezoelectric actuators, the average fluid flow rate is zero. An asymmetric oscillation pattern (micropump mode) results in a nonzero average flow rate. Two types of boundary conditions are considered in the region of contact between the piezoelectric drive and the tube — Dirichlet and Neumann. The computer model was tested for unsteady fluid flow induced by a pressure gradient applied along the pipe with a circular cross section. With synchronous oscillation of piezoelectric actuators, a nonzero average fluid flow is a systematic error. This value was compared with the asymmetric oscillation pattern of piezoelectric actuators to determine the contribution of the systematic error to the pump-generated fluid flow rate. Based on the fluid flow velocity profile and the results of profiling the program code, the optimal parameters of the computational meshes for the channel (dense uniform) and tube walls (nonuniform, consistent with the velocity profile and reconstructing at each time step) were determined, which reduce the magnitude of the systematic error. The main way to reduce the error is to increase the density of the computational mesh, which leads to an increase in the required computing resources. An alternative method is proposed for reducing the systematic error due to an additional pressure drop applied to the channel. Depending on the type of boundary conditions and the number of piezoelectric actuators, this method can reduce the systematic error by 1 − 2 orders of magnitude without increasing the simulation time.","PeriodicalId":277314,"journal":{"name":"Multiphase Systems.","volume":"147 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122723265","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Formatting of an article for the journal ”Multiphase Systems“: a guide for the author","authors":"M. Galimzyanov, C. Mikhaylenko, E.A. Nalobina","doi":"10.21662/mfs2021.1.001","DOIUrl":"https://doi.org/10.21662/mfs2021.1.001","url":null,"abstract":"Abstract is formatted in the header of the source file as a parameter to the abstract{} command. The abstract is intended to give a detailed description of the article, which makes it possible to judge the content used research approaches and results obtained. The volume of the abstract is 200–250 words (in the final file they are 18 to 22 lines long). Abstract can contain mathematical symbols (Greek letters, accents, degree symbol, etc.), but should not include equations. An exception is made for equalities determining important values, that is mathematical expressions of the form α = 123. The abstract should not contain tables, images, references to literature and other cross-references. This article provides a quick guide to using the mfs.cls class, which defines registration of an article in the journal ”Multiphase Systems“. The description is given in such a way that it can be used as a template for preparing your article. The editors of the journal ”Multiphase Systems“ and the authors of this article ask you to carefully follow the presentation the description, paying particular attention to those paragraphs that are in bold.","PeriodicalId":277314,"journal":{"name":"Multiphase Systems.","volume":"141 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124458328","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Study the dynamics of gas and gas-drop mixture in a point explosion based on Sedov’s analytical solution","authors":"R. Bolotnova, V. Korobchinskaya, E. A. Faizullina","doi":"10.21662/mfs2021.1.003","DOIUrl":"https://doi.org/10.21662/mfs2021.1.003","url":null,"abstract":"The dynamics of the behavior of a gas and a gas-drop mixture in a point explosion studied using the analytical solution of L.I. Sedov, constructed on the basis of a self-similar solution for the problem of a point explosion in a gas of spherical configuration. The analysis of the actual problems of theory of point explosion in connection with their use in studying the processes of explosive destruction of cosmic bodies in the atmosphere, where the obtained analytical solutions of Sedov were used as the initial conditions for further numerical implementation of the set problems. The works in which the problems of a point explosion in a dusty medium were considered in a self-similar formulation are noted. A self-similar solution of the Sedov problem of a point explosion in a gas and a gas-drop mixture is presented. A comparative analysis of the obtained solutions in gas and gas-drop mixture in the form of dynamic characteristics of the forming wave flows is made. It is shown that the use of an analytical solution makes it possible to estimate the parameters of shock waves in the studied medium and to obtain estimates of the efficiency of the energy-absorbing properties of a gas-drop mixture in comparison with a gas for conditions of equal initial energy action, which qualitatively does not contradict the existing solutions of other authors and the corresponding experimental data. The possibility of using the obtained analytical solutions in further research for approbation the applied numerical methods in solving problems of the dynamics of gas-liquid flows is noted.","PeriodicalId":277314,"journal":{"name":"Multiphase Systems.","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120854280","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Influence of physical parameters on the “viscous fingers” structure","authors":"A. A. Valiev, A. Nizamova, A.T. Ahmetov","doi":"10.21662/mfs2021.1.005","DOIUrl":"https://doi.org/10.21662/mfs2021.1.005","url":null,"abstract":"Displacement of oil by less viscous media leads to instability of the front and the formation of “viscous fingers”, the structure of which depends on various physical parameters. The most informative dynamics of the change in the interface between the injected fluid and the displaced medium with a change in physical parameters can be studied using the Hele-Show cell. The use of a cell with a small gap makes it possible to track the effect of changes in surface tension (at the interface, oil displacing liquid) on the formation of “viscous fingers”. The results of an experimental study of the development of “viscous fingers” during unstable displacement of oil by water and an aqueous solution of surfactants from the Hele-Show cell are presented. Physical parameters were changed: temperature, dynamic viscosity, surface tension and flow regimes influencing the formation of “viscous fingers”. It was found that an increase in the displacement fluid flow rate leads to an increase in the area of coverage and a decrease in the width of the “viscous fingers”. After the breakthrough, a drop in the share of oil displacement is observed. The use of surfactants reduces the surface tension at the interface between the two media, increases the coverage and significantly reduces the number and size of residual oil pillars, which leads to an increase in displacement efficiency. An increase in temperature decreases the viscosity ratio of the displaced and displaced fluid, which leads to less intensive tongue development and more efficient oil displacement. Fractal analysis of the dimensions of «viscous fingers» made it possible to establish a correlation between fractal dimension and displacement efficiency, an increase in fractal dimension corresponds to an increase in oil recovery. Thus, the change in physical parameters during unstable displacement makes it possible to find the determining factors for increasing oil recovery at various stages of displacement.","PeriodicalId":277314,"journal":{"name":"Multiphase Systems.","volume":"245 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123261414","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Numerical study of the dependence of the wave velocity of filtration gas combustion on the process parameters","authors":"P. B. Sadriddinov","doi":"10.21662/mfs2021.1.002","DOIUrl":"https://doi.org/10.21662/mfs2021.1.002","url":null,"abstract":"When solving problems in the field of filtration combustion of gases, numerical methods are often used to analyze the wave structure depending on changes in the hydrogen content in the mixture and other physical and chemical parameters. This work analyzes the stationary structure of the wave of filtration combustion of incompressible gas in the low-speed mode when the parameters of the gas flow and the porous medium change, as well as when the hydrogen content in the mixture changes. The problem is solved by the numerical Runge-Kutta method of the fourth order of accuracy, tested on a system of differential equations. Reduced to a dimensionless form, the system of equations is written in vector format. Programming is performed in Delphi 7. The results presented show agreement with the known experimental data and also allow us to obtain new conclusions about the structure of the filtration combustion wave of gases.","PeriodicalId":277314,"journal":{"name":"Multiphase Systems.","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116840263","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}