W. Cong, Z. Pei, Q. Feng, T. W. Deines, C. Treadwell
{"title":"Rotary ultrasonic machining of CFRP: A comparison with twist drilling","authors":"W. Cong, Z. Pei, Q. Feng, T. W. Deines, C. Treadwell","doi":"10.1177/0731684411427419","DOIUrl":"https://doi.org/10.1177/0731684411427419","url":null,"abstract":"Drilling is involved in many applications of carbon fiber–reinforced plastic composite. Twist drilling is widely used in industry. Rotary ultrasonic machining has been successfully tested to drill holes in carbon fiber–reinforced plastic. However, there are no reports on comparisons between rotary ultrasonic machining and twist drilling of carbon fiber-reinforced plastic. This paper compares rotary ultrasonic machining and twist drilling of carbon fiber–reinforced plastic in six aspects (cutting force, torque, surface roughness, delamination, tool life, and material remove rate). Experimental results show that rotary ultrasonic machining is superior in almost all these aspects.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116328969","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development and anti-bending behavior of a ‘π’ shape 3D woven composite","authors":"Jiasong Jiang, Chunxiao Liao, Luoqing Zhou","doi":"10.1177/0731684412437268","DOIUrl":"https://doi.org/10.1177/0731684412437268","url":null,"abstract":"Hollow woven composites are widely used as matrix in aeronautics and vehicles. This paper develops a new ‘π’ shape of 3D woven hollow composite to optimize its bending property. The new structure composite is woven with overlapping warp integral panel enhancing method. In order to weave it out, a new structure of heald has been innovated. Three specimens with different thickness of panels are manufactured by this method. The anti-bending performances of the composites are carried out by four-point bending tests. The experimental results show that with an increase of the number of the composites layers, the Young's modulus and failure loads of the composites are increased significantly.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"56 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126602158","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Prepreg age monitoring via differential scanning calorimetry","authors":"Lessa K. Grunenfelder, S. Nutt","doi":"10.1177/0731684411431020","DOIUrl":"https://doi.org/10.1177/0731684411431020","url":null,"abstract":"Fabrication of composite parts from prepregs often requires layup and preparation times of days and even weeks, during which prepregs undergo room-temperature aging. The aging process can compromise compaction, tack, and overall quality of composite parts, and thus a need exists for an accurate and convenient method to monitor the extent of prepreg aging as a function of out-time. Here, we report a method to monitor prepreg age, which involves measurement of changes in glass transition temperature as a function of room-temperature aging time. Samples from three out-of-autoclave prepreg systems were aged in ambient conditions and tested periodically using modulated differential scanning calorimetry. A linear increase in glass transition temperature with prepreg age was noted. Results are discussed in the context of monitoring the chemical aging of epoxy resins that occurs at ambient temperature.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128153043","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Morphology, mechanical, and crystallization behaviors of micro- and nano-ZnO filled polypropylene composites","authors":"H. Zaman, P. Hun, R. Khan, Keun-byoung Yoon","doi":"10.1177/0731684411436126","DOIUrl":"https://doi.org/10.1177/0731684411436126","url":null,"abstract":"The aim of this study was to study the effect of ZnO concentration on the morphology, mechanical, and crystallization behaviors of iPP. Three compositions of iPP/mZnO and iPP/nZnO composites were prepared in a co-rotational twin-screw extruder machine with ZnO content of 2 wt%, 5 wt%, and 8 wt%. Tensile tests showed that the tensile strength at yield and tensile modulus of the composites tended to increase with increasing contents of mZnO/nZnO particles. This improvement in the tensile properties was attributed to good interfacial adhesion between the fillers and the matrix, as evidenced by TEM examination. The tensile strength at yield and tensile modulus values of iPP/nZnO composite with the addition of 2–8 wt% nZnO are higher than those of virgin iPP, and even higher than those of iPP/mZnO composite with the addition of 2–8 wt% mZnO. The non-isothermal crystallization behavior of iPP/mZnO and iPP/nZnO composites was investigated using DSC. The results indicated that the interfacial interaction between iPP and mZnO/nZnO increased the crystallization temperature when the content of ZnO is 5 wt%.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"114 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131715904","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Morphology, dimensional stability and mechanical properties of polypropylene–wood flour composites with and without nanoclay","authors":"Hossein Khanjanzadeh, T. Tabarsa, A. Shakeri","doi":"10.1177/0731684412438793","DOIUrl":"https://doi.org/10.1177/0731684412438793","url":null,"abstract":"Several composites based on recycled—virgin polypropylene, wood flour and organically modified montmorillonite (commonly called ‘nanoclay’) were prepared by melt compounding. This paper aims to evaluate the potential for the use of recycled polypropylene and underutilized wood flour as material for the development of wood–plastic composites, as well as reinforcement effect of organically modified montmorillonite on them. In order to improve the poor interfacial interaction between the hydrophilic wood flour and hydrophobic polypropylene matrix, as well as polypropylene–organically modified montmorillonite, maleic anhydride-grafted polypropylene was used as a compatibilizer. Some mechanical and physical properties were evaluated. Findings of this work show that both recycled and virgin polypropylene can be used in manufacture of wood–plastic composites and there is no significant difference in the properties of resulting nanocomposites. It was found that mechanical properties of polypropylene containing 40wt% wood flour reinforcement remain essentially unchanged when the virgin polypropylene in the matrix is replaced be recycled polypropylene. Morphologies of the nanocomposites were analyzed by scanning electron microscopy and X-ray diffraction, and the results showed increased d-spacing of clay layers indicating enhanced compatibility between polypropylene and clay and wood flour. Consequently, polypropylene recycled from postconsumer applications can be used in high-value nanocomposites without going the expense of separating out impurities from the polymer.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"93 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133299326","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Bassyouni, I. Taha, S. Abdel-Hamid, L. Steuernagel
{"title":"Physico-mechanical properties of chemically treated polypropylene rice straw bio-composites","authors":"M. Bassyouni, I. Taha, S. Abdel-Hamid, L. Steuernagel","doi":"10.1177/0731684411436024","DOIUrl":"https://doi.org/10.1177/0731684411436024","url":null,"abstract":"Rice straw is causing in many countries severe environmental problems in terms of black clouds caused by the incineration process. Hence, among other reasons, the incorporation of ground rice straw as a filler and reinforcement material for polymers is of advantageous. In this study, Egyptian rice straw was used to reinforce commercial polypropylene and laboratory prepared maleic anhydride-grafted PP with the fill grades between 5wt% and 30wt%. Rice straw PP composites show an improved Young's modulus at increased fill grades, against a decrease in tensile strength. The addition of 1% maleic anhydride per I g of rice straw as a compatibilizing agent caused further amelioration of the fiber/matrix bonding leading to improved mechanical behavior, which was also assessed using scanning electron microscopy. Additional assessments were made via thermographic analysis and density measurements.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126365490","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ramanjaneya R. Butukuri, V. Bheemreddy, K. Chandrashekhara, T. Berkel, K. Rupel
{"title":"Evaluation of skin-core adhesion bond of out-of-autoclave honeycomb sandwich structures","authors":"Ramanjaneya R. Butukuri, V. Bheemreddy, K. Chandrashekhara, T. Berkel, K. Rupel","doi":"10.1177/0731684412437267","DOIUrl":"https://doi.org/10.1177/0731684412437267","url":null,"abstract":"Composite sandwich structures offer several advantages over conventional structural materials such as lightweight, high bending and torsional stiffness, superior thermal insulation and excellent acoustic damping. One failure mechanism in a composite sandwich structure is the debonding of the composite facesheets from the core structure. A well-formed adhesive fillet at the interface of the honeycomb core cell walls and the laminate is a significant factor in preventing bond failure. In the present work, honeycomb composite sandwich panels are manufactured using a low-cost vacuum-bag-pressure-only out-of-autoclave manufacturing process. CYCOM®5320 out-of autoclave prepreg is used for the facesheet laminates and FM® 300-2U film adhesive is used for the facesheet-to-core bond. The manufactured composite sandwich panels are of aerospace quality with a facesheet laminate void content of around 1%. In this study, adhesive fillet formation and adhesive mechanical strength are evaluated as a function of several different sandwich construction design variables. Both aluminum and aramid Nomex® honeycomb core materials are considered to study the effect of core cell size and core material. The effect of film adhesive thickness is studied. A process for reticulation of the adhesive is applied and studied. A quantitative investigation of the adhesive fillet geometry is carried out for all the panels. Manufactured panels are evaluated for flatwise tensile strength in accordance with test method ASTM C297. Optimized combinations of core material, core density, cell size and adhesive thickness are identified. Results show that the reticulation process improves fillet formation and increases flatwise tensile properties.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122979379","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A study on moisture absorption and swelling in bio-based jute-epoxy composites","authors":"R. Masoodi, K. Pillai","doi":"10.1177/0731684411434654","DOIUrl":"https://doi.org/10.1177/0731684411434654","url":null,"abstract":"Woven jute fibers, a class of affordable and biodegradable ‘green’ fibers, are being increasingly used as a substitute for the artificial glass and carbon fibers used in polymer composites. However, all natural fiber composites absorb water and swell in a moist environment For the first time, the swelling and weight gain behavior of bio-based composites made from jute fibers and bio-based or ordinary epoxy is presented in this experimental characterization study. Several such composites specimens were made using a low-pressure resin injection process similar to resin transfer molding; the specimens were made according to ASTM D 570 consisted of three compositions: pure resin, pure resin with a single jute fabric layer, and pure resin with two jute fabric layers. The effects of number of layers on moisture absorption, thickness swelling, volume swelling, and density were measured as a function of immersion time. It is observed that the moisture diffusion rate into composites increases with an increase in the jute-fiber-to-epoxy ratio. The type of epoxy used as the matrix appeared to have an influence on the moisture absorption percentages of the composites – the study showed that both water absorption and swellings were higher in the bio-epoxy parts compared to the epoxy parts. The swelling of composites was correlated with an increase in diameters of jute fiber in water and possibilities for the appearance of micro-cracks around fibers in composites were discussed. The data on moisture absorption, thickness swelling, and volume swelling of bio-based composites made from woven jute fibers, and bio-based and ordinary epoxies presented in this article will lead to a better understanding of how these composites react in wet environmental conditions.","PeriodicalId":264606,"journal":{"name":"Journals of Reinforced Plastics and Composites","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2012-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133350883","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}