{"title":"The importance of temperature control in the operation of high power ultrasound reactors","authors":"G. Memoli, P. Gélat, M. Hodnett, B. Zeqiri","doi":"10.1109/UIA.2009.5404027","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404027","url":null,"abstract":"This paper describes the effects of temperature changes on the operation of a 25 kHz sonochemical reactor, which is being developed as a reference facility for studying acoustic cavitation at NPL. Field measurements, acquired using a hydrophone in different locations inside the cavitation reactor, are compared with Finite Element Models at different temperatures, showing that significant changes in the acoustic pressure distribution (and consequent cavitation activity) can result from relatively small temperature variations. Modal analysis was used in this work as a tool to explain the physical reasons behind this behaviour and the effects of a preliminary temperature control system will be described, both in terms of temperature and for the improved stability of the acoustic pressure field. This work also highlights some of the limitations of modal analysis for the design of more complex reactors and associated temperature control methods.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121021081","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
F. Nogata, Y. Yokota, Y. Kawamura, H. Morita, Y. Uno, W. Walsh
{"title":"Ultrasound image-based estimation system for arteriosclerosis of in vivo blood vessels","authors":"F. Nogata, Y. Yokota, Y. Kawamura, H. Morita, Y. Uno, W. Walsh","doi":"10.1109/UIA.2009.5404025","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404025","url":null,"abstract":"With aging, the mechanical properties of a blood vessel degrade; its strength and elongation decreases. However, its stiffness (stress/strain) increases. Also the rate of hardening of the vessel depends on the individual. It is an urgent task to establish an inspection technique for strength parameters as hardening progresses. This report presents such a technique for estimating sclerosis of in vivo blood vessel with ultrasound B-mode image. The method is based on in vivo stiffness (Eth) calculated from variations in vessel diameter with changes in systolic and diastolic blood pressures. In addition, we obtained a correlation between Eth and strength (σu) from the results of tensile and internal pressure tests using some animal model and human artery specimens. Therefore, we can estimate in vivo Eth and σu of an artery using B-mode image and an associated correlation curve. To simplify the measurement of changes in diameter, prototype software was developed. To examine the validity of this technique, clinical data was collected at some hospitals. The results indicated that Eth and σu are useful symptom indices for arteriosclerosis, particularly for identifying the beginning of sclerosis in patients in their early twenties.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"129 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134141963","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Cotter, S. Gupta, M. F. Shinopulos, J. O’Connor
{"title":"Ultrasonic surgical horn for approaches to brain tumors and spine applications","authors":"D. Cotter, S. Gupta, M. F. Shinopulos, J. O’Connor","doi":"10.1109/UIA.2009.5404034","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404034","url":null,"abstract":"Ultrasonic surgical aspirators are used for removal of tumors in the brain and approaches in spine, where a transducer and horn with a central hole fragment and suction tissue. Bone fragmenting and aspirating surgical tips (horns) are discussed for accessing deeper regions in the brain and for emerging spine applications. Attaining resonant frequency, predicting displacements, and monitoring stress distribution and errant motion are afforded with FEM (Finite Element Method) for emerging complex-contoured horns, complementing one-dimensional physical-mathematical models. A full model method with no artificial constraints and a damped forcing function yields agreement between measured horn displacement and FEM results within 2.5% error (e.g. 5 μm in 224 μm p-p) for the new geometry and baseline horns of this study, and 6.8% error (8 μm in 117 μm p-p) for more complex models.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130495459","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Hajihasani, Y. Farjami, S. Gharibzadeh, Jahan Tavakkoli
{"title":"A novel numerical solution to the diffraction term in the KZK nonlinear wave equation","authors":"M. Hajihasani, Y. Farjami, S. Gharibzadeh, Jahan Tavakkoli","doi":"10.1109/UIA.2009.5404032","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404032","url":null,"abstract":"Nonlinear ultrasound modeling is finding an increasing number of applications in both medical and industrial areas where due to high pressure amplitudes the effects of nonlinear propagation are no longer negligible. Taking nonlinear effects into account makes the ultrasound beam analysis more accurate in these applications. One of the most widely used nonlinear models for propagation of 3D diffractive sound beams in dissipative media is the KZK (Khokhlov, Kuznetsov, Zabolotskaya) parabolic nonlinear wave equation. Various numerical algorithms have been developed to solve the KZK equation. Generally, these algorithms fall into one of three main categories: frequency domain, time domain and combined time-frequency domain. The intrinsic parabolic approximation in the KZK equation imposes a limiting accuracy on the solution to the diffraction term of the KZK equation, particularly for field points in near field or in far off-axis regions. In this work we developed a novel generalized time domain numerical algorithm to solve the diffraction term of the KZK equation. The algorithm solves the Laplacian operator of the KZK equation in 3D Cartesian coordinates using a novel finite difference technique. This leads to a more accurate solution to the diffraction term in the KZK equation without compromising calculational efficiency. The outcome is a new numerical algorithm to solve the KZK equation with higher accuracy and increased efficiency compared to current algorithms.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"52 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121928410","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Mechanisms of ultrasonic thrombolysis","authors":"J. Vaitekunas, Elvira Lang, M. Schafer","doi":"10.1109/UIA.2009.5404026","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404026","url":null,"abstract":"An ultrasonic transversely vibrating wire delivers energy to an active zone to facilitate thrombolysis in a blood vessel. Ultimately, all the energy delivered into the treatment region at the active zone ends up as heat. The heat created can originate from three sources. The first source of heat is from stresses in the waveguide and resultant internal frictional losses of the material; this heat is conducted into the fluid surrounding the waveguide. The second source of heat is from absorption due to acoustic propagation through the fluid. The third source of heat is from viscous losses as the wire moves through the fluid. This paper determines that the average power of an Omniwave ultrasonic thrombolysis system running in a single 20 kHz transverse mode with a 120 micrometer peak-to-peak amplitude is about 1.3 Watts due primarily to viscous losses.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"7 5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121643138","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimizing piezoelectric crystal preload in ultrasonic transducers","authors":"D. DeAngelis, G. Schulze","doi":"10.1109/UIA.2009.5404031","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404031","url":null,"abstract":"Designers of industrial ultrasonic transducers commonly use the integral piezoelectric crystals as a force sensor for setting preload. This usually involves a press fixture and charge amplifier for the measurement of voltage versus force. Although this is a very convenient method, it may be inaccurate since the governing piezoelectric properties can vary ±20% from lot-to-lot. Other preload schemes employ a force gauge during pressing, or use some experimental metric via testing of the individual crystals prior to assembly; this can include Bode plots of crystals, or the use of a universal materials testing machine. This research quantifies the performance of ultrasonic transducers based on preload, with the goal of improving the aging stability of impedance and current versus displacement gain. Inadequate preload can result in dynamic gapping at interfaces, manifesting as higher impedance and prolonged aging affects. Excessive preload can result in pronounced depoling with unstable impedance and aging. This investigation focuses solely on the common Navy Type III, PZT8 piezoelectric material. Several metrics are investigated such as Bode phase window (individual crystals and transducer), capacitance and electromechanical coupling factor. The experimental and theoretical research methods include Bode plots, equivalent circuits, scanning laser vibrometer, materials testing machine and finite element analysis correlation.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"103 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128150283","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Porous PZT with tailored ultrasonic properties","authors":"R. Lou-Møller, W. Wolny, E. Ringgaard","doi":"10.1109/UIA.2009.5404030","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404030","url":null,"abstract":"For many years, PZT has been the most important piezoelectric ceramic for commercial applications. The well-known soft and hard PZT types are obtained by doping with various elements, but especially mechanical and acoustic properties cannot be altered significantly by slight modifications of the composition. However, the invention of PZT with controlled porosity has greatly extended the range of properties that can be obtained. The introduction of porosity into the structure affects all properties, and by optimising composition, porosity level and pore size it has proved possible to design materials that can replace especially lead metaniobate-based ceramics for a number of applications. The new materials combine properties normally associated with lead metaniobate, e.g. low acoustic impedance, with the well-known virtues of PZT, such as high piezoelectric coupling coefficients and the possibility to adjust the dielectric constant and the mechanical quality factor by doping. The porous PZT materials have been tested commercially and examples of specific applications are given.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"52 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132089118","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Minimally invasive robotic HIFU neurosurgical applications","authors":"S. Chauhan, M. T. Tan, G. Seet, I. Ng","doi":"10.1109/UIA.2009.5404033","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404033","url":null,"abstract":"Due to complex anatomy and functionality of brain, volumetric excision of abnormal tissue targets such as tumors/cancers poses a great risk as it is difficult without causing harm to the overlying normal structures. Minimally invasive and non-invasive robotic approaches are being widely investigated as alternatives to traditional open surgery due to their advantages in accurate planning, registration, navigation and manipulation. In this paper, we present robot-assisted minimally invasive means for volumetric ablation of brain tumors using High Intensity Focused Ultrasound (HIFU) modality through a precise craniotomy. The end-effector is capable of integrating and registering the prevalent single, multiple or phased array applicators coupled to dura-mater using a flexible degassed water chamber. Our customized modular robot named, Neurobot, comprising of various modules that work in active and passive modes and its treatment planning are described. The robot is equipped with alternating end-effectors respectively for drilling and energy delivery and the measured accuracy of this system is within 0.1 mm.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127351324","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A novel sensor for determining ultrasonic intensity","authors":"M. Hodnett, B. Zeqiri","doi":"10.1109/UIA.2009.5404029","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404029","url":null,"abstract":"Quantifying the acoustic output of diagnostic and therapeutic medical ultrasound devices is an established practice, using measurement methods based on applying miniature hydrophones to determine acoustic pressure distributions. However, specification standards require manufacturers to describe and declare acoustic output information in the form of intensity values, as these are more relevant to the possibility of adverse bioeffects. Simple relationships exist to calculate intensities from pressure data, but under many circumstances, such as away from the acoustic axis and in the transducer near-field, the underpinning assumptions break down. This paper describes the design, development and testing to proof-of-concept of a novel design of ultrasound sensor which can determine intensity directly. The sensor uses the pyroelectric properties of the piezoelectric polymer PVDF, and takes the form of a conventional membrane hydrophone backed with a highly attenuating polyurethane-based material. Ultrasound incident on the backing material is quickly absorbed, and the rate of temperature increase over a short timescale is proportional to the intensity in the beam, and produces a pyroelectric voltage response in the PVDF film. The new sensor also behaves as a conventional hydrophone, and can be used to derive acoustic pressure profiles. Intensity results are compared with pressure-squared data obtained from beam-plotting a range of simple transducer fields, and suggest differences in the beam profiles, particularly in the acoustic near field.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129121220","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Muratore, J. Lamanna, M. R. Lamprecht, B. Morrison
{"title":"Bioeffects of low dose ultrasound on neuronal cell function","authors":"R. Muratore, J. Lamanna, M. R. Lamprecht, B. Morrison","doi":"10.1109/UIA.2009.5404028","DOIUrl":"https://doi.org/10.1109/UIA.2009.5404028","url":null,"abstract":"A growing body of work demonstrates the therapeutic value of sub-ablation ultrasound on various tissues. If ultrasound can safely manipulate neuronal tissue, then it might be possible to use it to treat neurodegenerative diseases. Anticipating such future applications, we investigated reversible bioeffects of very low dose focused ultrasound on neuronal cell function in vitro. A rat hippocampal slice was cultured for 6 days and transferred to the well of a 60-channel multi-electrode array. An f/2.1 ultrasound transducer with a water-filled coupling cone was focused on a culture and excited with 100-μs, 4.04-MHz pulses ranging from 0.10 W through 1.43 W acoustic power. Ultrasonically-evoked field potentials with biphasic amplitudes as high as 329.1 μVpp were observed in the dentate gyrus region. There appears to be a stimulus threshold that lies between an acoustic power of 0.37 and 0.90 W.","PeriodicalId":210339,"journal":{"name":"2009 38th Annual Symposium of the Ultrasonic Industry Association (UIA)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129147693","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}