{"title":"用SiO/ sub2 //Pt/Pb(Zr,Ti)O/ sub3 //Pt薄膜层改善微扫描仪致动器多层结构应力","authors":"L. Zhang, R. Maeda, Z.J. Wang","doi":"10.1109/OMEMS.2002.1031484","DOIUrl":null,"url":null,"abstract":"Stresses in MEMS multilayer structures with SiO/sub 2//Pt/Pb(Zr,Ti)O/sub 3//Pt thin-film stacks on Si substrates for micro-scanner actuators were investigated by measuring radius of wafer curvature for each film. The stresses in each film after the last coating were in tension except the Pt top electrode. The Pt bottom electrode shows an especially large tensile stress of approximately 1.3 GPa. The beam-scanners were then fabricated to,investigate the curving state of multilayer structure released from Si substrate. The curving states of beams are related to not only the stresses in each film but also the balance of flexural rigidity of each film. A beam without any curvature was obtained successfully by changing the thickness of each film. A large optical scanning angle of 40-degree was obtained at the first resonance frequency of 2.78 kHz for the fabricated straight beam-scanner.","PeriodicalId":285115,"journal":{"name":"IEEE/LEOS International Conference on Optical MEMs","volume":"8 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2002-11-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Improvement of stresses in multilayer structures with SiO/sub 2//Pt/Pb(Zr,Ti)O/sub 3//Pt thin-film stacks for micro-scanner actuators\",\"authors\":\"L. Zhang, R. Maeda, Z.J. Wang\",\"doi\":\"10.1109/OMEMS.2002.1031484\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Stresses in MEMS multilayer structures with SiO/sub 2//Pt/Pb(Zr,Ti)O/sub 3//Pt thin-film stacks on Si substrates for micro-scanner actuators were investigated by measuring radius of wafer curvature for each film. The stresses in each film after the last coating were in tension except the Pt top electrode. The Pt bottom electrode shows an especially large tensile stress of approximately 1.3 GPa. The beam-scanners were then fabricated to,investigate the curving state of multilayer structure released from Si substrate. The curving states of beams are related to not only the stresses in each film but also the balance of flexural rigidity of each film. A beam without any curvature was obtained successfully by changing the thickness of each film. A large optical scanning angle of 40-degree was obtained at the first resonance frequency of 2.78 kHz for the fabricated straight beam-scanner.\",\"PeriodicalId\":285115,\"journal\":{\"name\":\"IEEE/LEOS International Conference on Optical MEMs\",\"volume\":\"8 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2002-11-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IEEE/LEOS International Conference on Optical MEMs\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/OMEMS.2002.1031484\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE/LEOS International Conference on Optical MEMs","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/OMEMS.2002.1031484","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Improvement of stresses in multilayer structures with SiO/sub 2//Pt/Pb(Zr,Ti)O/sub 3//Pt thin-film stacks for micro-scanner actuators
Stresses in MEMS multilayer structures with SiO/sub 2//Pt/Pb(Zr,Ti)O/sub 3//Pt thin-film stacks on Si substrates for micro-scanner actuators were investigated by measuring radius of wafer curvature for each film. The stresses in each film after the last coating were in tension except the Pt top electrode. The Pt bottom electrode shows an especially large tensile stress of approximately 1.3 GPa. The beam-scanners were then fabricated to,investigate the curving state of multilayer structure released from Si substrate. The curving states of beams are related to not only the stresses in each film but also the balance of flexural rigidity of each film. A beam without any curvature was obtained successfully by changing the thickness of each film. A large optical scanning angle of 40-degree was obtained at the first resonance frequency of 2.78 kHz for the fabricated straight beam-scanner.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
