An ultrasound-induced MXene doped PAM–SA super-tough hydrogel

IF 5.1 2区 材料科学 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY
Keyi Li, Yong Liu, Yaqing Ge, Hongyan Cao, Shujuan Zhuang, Xueting Yang, Yanyan Zhao and Xiangling Gu
{"title":"An ultrasound-induced MXene doped PAM–SA super-tough hydrogel","authors":"Keyi Li, Yong Liu, Yaqing Ge, Hongyan Cao, Shujuan Zhuang, Xueting Yang, Yanyan Zhao and Xiangling Gu","doi":"10.1039/D2TC04665B","DOIUrl":null,"url":null,"abstract":"<p >Here we reported a novel ultrasound-induced polymerization to achieve a polyacrylamide–sodium alginate (SA) dual network hydrogel <em>via</em> a redox reaction with MXene (Ti<small><sub>3</sub></small>C<small><sub>2</sub></small>) as a reductant and potassium persulfate (KPS) as an oxidant. Polymerization of acrylamide was carried out at 15 °C for only 5 min with a mass ratio of MXene:KPS of 1/10, and the hydrogel was further immersed in a 10 wt% CaAc<small><sub>2</sub></small> solution for 1.5 h. Super-toughness (elongation at break of 1728% and toughness of 2633.7 KJ m<small><sup>?3</sup></small>) and excellent conductivity (up to 3.5 S m<small><sup>?1</sup></small>) were achieved, mainly due to coordinated regulation of MXene and Ca<small><sup>2+</sup></small>. MXene also acted as a crosslinker to effectively transfer the stress to polymer chains under the external force. The secondary cross-linking was achieved by the dynamic complexation between –COO<small><sup>?</sup></small> of SA and the continuously released Ca<small><sup>2+</sup></small> from CaAc<small><sub>2</sub></small>. The strategy employed in this paper will be helpful to prepare intelligent flexible strain sensors.</p>","PeriodicalId":84,"journal":{"name":"Journal of Materials Chemistry C","volume":" 5","pages":" 1908-1918"},"PeriodicalIF":5.1000,"publicationDate":"2023-01-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Materials Chemistry C","FirstCategoryId":"1","ListUrlMain":"https://pubs.rsc.org/en/content/articlelanding/2023/tc/d2tc04665b","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 3

Abstract

Here we reported a novel ultrasound-induced polymerization to achieve a polyacrylamide–sodium alginate (SA) dual network hydrogel via a redox reaction with MXene (Ti3C2) as a reductant and potassium persulfate (KPS) as an oxidant. Polymerization of acrylamide was carried out at 15 °C for only 5 min with a mass ratio of MXene:KPS of 1/10, and the hydrogel was further immersed in a 10 wt% CaAc2 solution for 1.5 h. Super-toughness (elongation at break of 1728% and toughness of 2633.7 KJ m?3) and excellent conductivity (up to 3.5 S m?1) were achieved, mainly due to coordinated regulation of MXene and Ca2+. MXene also acted as a crosslinker to effectively transfer the stress to polymer chains under the external force. The secondary cross-linking was achieved by the dynamic complexation between –COO? of SA and the continuously released Ca2+ from CaAc2. The strategy employed in this paper will be helpful to prepare intelligent flexible strain sensors.

Abstract Image

超声诱导MXene掺杂PAM-SA超韧水凝胶
在这里,我们报道了一种新的超声诱导聚合,通过MXene (Ti3C2)作为还原剂和过硫酸钾(KPS)作为氧化剂的氧化还原反应,得到聚丙烯酰胺-海藻酸钠(SA)双网络水凝胶。在MXene:KPS的质量比为1/10的条件下,在15°C下聚合5 min,然后在10 wt%的CaAc2溶液中浸泡1.5 h。由于MXene和Ca2+的协同调节,获得了超韧性(断裂伸长率1728%,韧性2633.7 KJ m?3)和优异的电导率(高达3.5 S m?1)。MXene还可以作为交联剂,在外力作用下有效地将应力传递给聚合物链。二级交联是通过-COO ?并从CaAc2中持续释放Ca2+。本文所采用的策略将有助于制作智能柔性应变传感器。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Journal of Materials Chemistry C
Journal of Materials Chemistry C MATERIALS SCIENCE, MULTIDISCIPLINARY-PHYSICS, APPLIED
CiteScore
10.80
自引率
6.20%
发文量
1468
期刊介绍: The Journal of Materials Chemistry is divided into three distinct sections, A, B, and C, each catering to specific applications of the materials under study: Journal of Materials Chemistry A focuses primarily on materials intended for applications in energy and sustainability. Journal of Materials Chemistry B specializes in materials designed for applications in biology and medicine. Journal of Materials Chemistry C is dedicated to materials suitable for applications in optical, magnetic, and electronic devices. Example topic areas within the scope of Journal of Materials Chemistry C are listed below. This list is neither exhaustive nor exclusive. Bioelectronics Conductors Detectors Dielectrics Displays Ferroelectrics Lasers LEDs Lighting Liquid crystals Memory Metamaterials Multiferroics Photonics Photovoltaics Semiconductors Sensors Single molecule conductors Spintronics Superconductors Thermoelectrics Topological insulators Transistors
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书