A dynamic inspection model for predictive maintenance considering different degrees of inspection quality

IF 9.4 1区 工程技术 Q1 ENGINEERING, INDUSTRIAL
Duc-Hanh Dinh , Phuc Do , Minh-Hien Bui , Phuoc-Vinh Dang
{"title":"A dynamic inspection model for predictive maintenance considering different degrees of inspection quality","authors":"Duc-Hanh Dinh ,&nbsp;Phuc Do ,&nbsp;Minh-Hien Bui ,&nbsp;Phuoc-Vinh Dang","doi":"10.1016/j.ress.2025.111165","DOIUrl":null,"url":null,"abstract":"<div><div>In predictive maintenance (PdM), inspection plays a key role since it provides information about system health to support maintenance decision-making. However, inspection may be costly, which is one of the bottlenecks of the PdM. To reduce the overall inspection cost, this paper proposes a dynamic inspection model that incorporates three levels of inspection quality: (1) Binary state inspection, which is the cheapest one, can only reveal the binary state of the system, whether functioning or not; (2) Imperfect degradation inspection, which incurs a higher cost, but can provide the system state and degradation level with uncertainty; and (3) Perfect degradation inspection, which is the most expensive one, can provide the true system’s degradation level. Accordingly, at each inspection epoch, the inspection level is selected based on the predictive reliability of the system. By dynamically selecting the inspection level at each inspection epoch, the overall inspection cost of the system can be reduced. In that way, a reliability prediction model considering three kinds of inspections is first proposed for inspection and maintenance decision-making. Then, a maintenance cost model is developed to find the optimal predictive inspection and maintenance policy. Finally, a case study on predictive maintenance of an injection molding machine is conducted to investigate the applicability and benefit of the proposed dynamic inspection model.</div></div>","PeriodicalId":54500,"journal":{"name":"Reliability Engineering & System Safety","volume":"261 ","pages":"Article 111165"},"PeriodicalIF":9.4000,"publicationDate":"2025-04-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Reliability Engineering & System Safety","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0951832025003667","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, INDUSTRIAL","Score":null,"Total":0}
引用次数: 0

Abstract

In predictive maintenance (PdM), inspection plays a key role since it provides information about system health to support maintenance decision-making. However, inspection may be costly, which is one of the bottlenecks of the PdM. To reduce the overall inspection cost, this paper proposes a dynamic inspection model that incorporates three levels of inspection quality: (1) Binary state inspection, which is the cheapest one, can only reveal the binary state of the system, whether functioning or not; (2) Imperfect degradation inspection, which incurs a higher cost, but can provide the system state and degradation level with uncertainty; and (3) Perfect degradation inspection, which is the most expensive one, can provide the true system’s degradation level. Accordingly, at each inspection epoch, the inspection level is selected based on the predictive reliability of the system. By dynamically selecting the inspection level at each inspection epoch, the overall inspection cost of the system can be reduced. In that way, a reliability prediction model considering three kinds of inspections is first proposed for inspection and maintenance decision-making. Then, a maintenance cost model is developed to find the optimal predictive inspection and maintenance policy. Finally, a case study on predictive maintenance of an injection molding machine is conducted to investigate the applicability and benefit of the proposed dynamic inspection model.
考虑不同检测质量程度的预测维修动态检测模型
在预测性维护(PdM)中,检查起着关键作用,因为它提供有关系统健康状况的信息,以支持维护决策。然而,检查可能是昂贵的,这是PdM的瓶颈之一。为了降低整体检测成本,本文提出了一种包含三个检测质量层次的动态检测模型:(1)二值状态检测是最便宜的一种,它只能显示系统的二值状态,无论是否正常运行;(2)劣化检测不完善,成本较高,但系统状态和劣化程度具有不确定性;(3)完善的退化检测可以提供真实的系统退化水平,这是最昂贵的检测方法。据此,在每个检测历元,根据系统的预测可靠性选择检测级别。通过动态选择每个检测历元的检测级别,可以降低系统的总体检测成本。在此基础上,首次提出了一种考虑三种检查的可靠性预测模型,用于检查和维修决策。然后,建立了维修成本模型,以寻找最优的预测性检修策略。最后,以某注塑机的预测维修为例,验证了所提出的动态检测模型的适用性和有效性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Reliability Engineering & System Safety
Reliability Engineering & System Safety 管理科学-工程:工业
CiteScore
15.20
自引率
39.50%
发文量
621
审稿时长
67 days
期刊介绍: Elsevier publishes Reliability Engineering & System Safety in association with the European Safety and Reliability Association and the Safety Engineering and Risk Analysis Division. The international journal is devoted to developing and applying methods to enhance the safety and reliability of complex technological systems, like nuclear power plants, chemical plants, hazardous waste facilities, space systems, offshore and maritime systems, transportation systems, constructed infrastructure, and manufacturing plants. The journal normally publishes only articles that involve the analysis of substantive problems related to the reliability of complex systems or present techniques and/or theoretical results that have a discernable relationship to the solution of such problems. An important aim is to balance academic material and practical applications.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信