A closely spaced dual band polarization insensitive FSS for 5G applications

Abstract

This study presents a novel single layer Frequency Selective Surface (FSS) for fifth generation (5G) applications with a polarization independent closely spaced dual band response. The proposed design consists of four split ring apertures etched on a square patch printed on a RT5880 dielectric substrate. The FSS has two stop-bands at 24.78 GHz and 28 GHz center frequencies with attenuations around 55 dB. The S21<−10 dB bandwidths (BW) of these bands are 14.48 % and 9.25 %, respectively and these closely spaced bands succeed 1.13 frequency ratio. It shows a stable frequency response for both TE and TM polarizations. Furthermore, the FSS represents a single layered and quite thin (thickness 0.042${\lambda }_l$) structure with its unit cell size (0.70${\lambda }_l$ × 0.70${\lambda }_l$, where ${\lambda }_l$ is the free-space wavelength at lower frequency). The novelty of the presented FSS is not only achieving a small closely spaced band ratio in the mmWave band and exhibiting polarization insensitivity but also providing these features with a simple geometry and, uncomplicated single layer structure. The simulation results were confirmed by well accordant measurement results. All these results make the presented FSS a good candidate for 5G electromagnetic interference (EMI) shielding applications.