Process control & integration options of RMG technology for aggressively scaled devices

Abstract

We report on aggressively scaled RMG-HKL devices, with tight low-V_T distributions [σ(V_Tsat) ~ 29mV (PMOS), ~ 49mV (NMOS) at L_gate~35nm] achieved through controlled EWF-metal alloying for NMOS, and providing an in-depth overview of its enabling features: 1) physical mechanisms, model supported by TCAD simulations and analysis techniques such as TEM, EDS; 2) process optimizations implementation: oxygen sources reduction, control of RF-PVD TiAl/TiN ratio and reduced H_gate, also impacting stress induced in the channel. Additional key features: 1) Al vs. W as fill-metal, with careful liner/barrier materials selection and tuning yielding well-behaved devices with tight R_gate distributions down to L_gate~20nm, and enabling both PMOS and NMOS low-VT values for high aspect-ratio gates (H_gate~60nm, L_gate≥30nm); 2) wet-etch vs. siconi clean for dummy-dielectric removal, with HfO₂ post-deposition N₂-anneal resulting in substantial BTI improvement without EOT or low-field/peak mobility penalty, and good noise response.