Modular software for VME/VXI subsystems

IEEE Automatic Testing Conference.The Systems Readiness Technology Conference. Automatic Testing in the Next Decade and the 21st Century. Conference Record. Pub Date : 1989-09-25 DOI:10.1109/AUTEST.1989.81109

R. Hughes, E. Miller, C. Riall

引用次数: 0

Abstract

As part of a standardization effort, a software architecture was designed to control high-speed devices within an ATE (automatic test equipment) system. Devices that require real-time responses were located in a subsystem controlled by a dedicated processor. A host computer communicates with the subsystem using a communications bus (referred to as the host bus). The hardware chosen to implement this design consisted of a VMEbus card rack (later a VXIbus card rack) containing a minimum of one single-board computer and an interface to the host bus. Software was implemented using a commercial real-time operating system kernel. The modular architecture enables users to configure the subsystem hardware and software components to satisfy requirements for their specific applications.<>

查看原文本刊更多论文

VME/VXI子系统的模块化软件

作为标准化工作的一部分，设计了一个软件体系结构来控制ATE(自动测试设备)系统中的高速设备。需要实时响应的设备位于由专用处理器控制的子系统中。主机使用通信总线(称为主机总线)与子系统通信。选择硬件来实现这个设计，包括一个VMEbus卡架(后来的VXIbus卡架)，包含至少一个单板计算机和一个到主机总线的接口。软件使用商业实时操作系统内核实现。模块化架构使用户能够配置子系统的硬件和软件组件，以满足其特定应用的需求。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

IEEE Automatic Testing Conference.The Systems Readiness Technology Conference. Automatic Testing in the Next Decade and the 21st Century. Conference Record.

自引率

0.00%

发文量