Modeling and exploiting the strip tension influence on surface imprinting during temper rolling of cold-rolled steel

To produce cold-rolled steel strips with specific mechanical properties and surface roughness typically temper rolling is adopted. In most cases, a uniform roughness pattern on the strip surface is mandatory. Due to the wear of the textured work rolls, their surface roughness ($Ra$) continuously reduces during the process, which should be accounted for process control. However, conventional temper rolling systems fail to guarantee a uniform surface roughness. In this work, the influence of strip tension on the imprinting of surface roughness during temper rolling is analyzed based on a multi-scale FE modeling concept to explore new ways for surface roughness control. This is done in simulation where, a macroscopic rolling model incorporating strip tension is coupled to a mesoscopic imprinting model and both models are validated using copper rolling trials. The influence of different thickness reductions, strip tensions and incoming strip's surface roughness on imprinting is modeled and compared. The numerical results reveal that a higher strip tension decreases the roughness transfer, which presents potential to control the roughness transfer ratio without changing other process parameters like the prescribed thickness reduction in the future.