热蒸发法制备用于水分解的氧化锌薄膜

2015 International Conference on Electrical & Electronic Engineering (ICEEE) Pub Date : 2015-11-01 DOI:10.1109/CEEE.2015.7428270

M. S. Islam, M. F. Hossain, S. M. Abdur Razzak, M. Haque, M. N. Khan

{"title":"热蒸发法制备用于水分解的氧化锌薄膜","authors":"M. S. Islam, M. F. Hossain, S. M. Abdur Razzak, M. Haque, M. N. Khan","doi":"10.1109/CEEE.2015.7428270","DOIUrl":null,"url":null,"abstract":"The aim of this paper is to fabricate zinc oxide (ZnO) photoelectrode by a modified thermal evaporation system for water splitting application. At first, zinc thin film has been deposited on bare fluorine doped tin oxide (FTO) glass substrate by a modified thermal evaporation system with chamber pressure 0.05 mbar, source temperature 700°C, source substrate distance 3 cm and deposition time 5 min. For obtaining ZnO thin film, the prepared zinc film is annealed at 500°C for 2 hours in atmosphere. The prepared ZnO film is characterized and investigated the photoelectrochemical performance and suitability for splitting of water.","PeriodicalId":6490,"journal":{"name":"2015 International Conference on Electrical & Electronic Engineering (ICEEE)","volume":"61 51","pages":"253-256"},"PeriodicalIF":0.0000,"publicationDate":"2015-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":"{\"title\":\"Zinc oxide thin film fabricated by thermal evaporation method for water splitting application\",\"authors\":\"M. S. Islam, M. F. Hossain, S. M. Abdur Razzak, M. Haque, M. N. Khan\",\"doi\":\"10.1109/CEEE.2015.7428270\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The aim of this paper is to fabricate zinc oxide (ZnO) photoelectrode by a modified thermal evaporation system for water splitting application. At first, zinc thin film has been deposited on bare fluorine doped tin oxide (FTO) glass substrate by a modified thermal evaporation system with chamber pressure 0.05 mbar, source temperature 700°C, source substrate distance 3 cm and deposition time 5 min. For obtaining ZnO thin film, the prepared zinc film is annealed at 500°C for 2 hours in atmosphere. The prepared ZnO film is characterized and investigated the photoelectrochemical performance and suitability for splitting of water.\",\"PeriodicalId\":6490,\"journal\":{\"name\":\"2015 International Conference on Electrical & Electronic Engineering (ICEEE)\",\"volume\":\"61 51\",\"pages\":\"253-256\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"5\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2015 International Conference on Electrical & Electronic Engineering (ICEEE)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CEEE.2015.7428270\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 International Conference on Electrical & Electronic Engineering (ICEEE)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CEEE.2015.7428270","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 5

摘要

本文的目的是利用改进的热蒸发系统制备用于水分解的氧化锌(ZnO)光电极。首先，采用改进的热蒸发系统，在室压0.05 mbar，源温度700℃，源衬底距离3 cm，沉积时间5 min的条件下，在裸氟掺杂氧化锡(FTO)玻璃衬底上沉积锌薄膜。将制备好的锌薄膜在500℃的气氛下退火2小时，得到ZnO薄膜。对制备的ZnO薄膜进行了表征，并研究了其光电化学性能和对水的分解性能。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Zinc oxide thin film fabricated by thermal evaporation method for water splitting application

The aim of this paper is to fabricate zinc oxide (ZnO) photoelectrode by a modified thermal evaporation system for water splitting application. At first, zinc thin film has been deposited on bare fluorine doped tin oxide (FTO) glass substrate by a modified thermal evaporation system with chamber pressure 0.05 mbar, source temperature 700°C, source substrate distance 3 cm and deposition time 5 min. For obtaining ZnO thin film, the prepared zinc film is annealed at 500°C for 2 hours in atmosphere. The prepared ZnO film is characterized and investigated the photoelectrochemical performance and suitability for splitting of water.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2015 International Conference on Electrical & Electronic Engineering (ICEEE)

自引率

0.00%

发文量