Kyle A. Baker, Eryn A. Culton, Joshua A. Ten Eyck, Zachary Lewis, Timothy A. Sands
{"title":"奇异性的矛盾假设","authors":"Kyle A. Baker, Eryn A. Culton, Joshua A. Ten Eyck, Zachary Lewis, Timothy A. Sands","doi":"10.5539/mer.v9n2p28","DOIUrl":null,"url":null,"abstract":"Modification of rigid body angular momentum permits controlled rotational maneuvers, and one common momentum-exchange actuator contains challenging mathematical singularities that occur when the actuator geometrically aligns perpendicularly to the commanded torque direction. Substantial research has arisen toward singularity avoidance, singularity escape (when avoidance fails), and singularity penetration which permits safe flight through regions of singularity. The latter two in particular, singularity escape and penetration require mathematical calculations of singular and near-singular quantities (very large numbers) using constituent numbers that are sometimes very small. This dichotomy leads to interesting peculiarities in some specific geometries. This short communication critically evaluates three often spoke postulates for defining singularity and the axioms that accompany the postulates. Researchers using disparate postulates arrive at contradictory conclusions about singularities, and we examine these peculiarities, leading to a few conclusions. Singular conditions must never be declared in the abstract without consideration for the commanded maneuver (e.g. the claim “the CMG system is singular”). Seeking the true angular momentum capability at near-planar skew angles, this research concludes that performance prediction is difficult installations at low skew angles should be avoided whenever permissible to enhance abilities of mathematical calculations. It will be shown that maximum momentum performance is easily predicted at very high and very low skew angles, and performance will be shown to be lowest at mid-values of skew angle. Meanwhile, maximum singularity-free performance remains elusive at even modestly low skew-angles.","PeriodicalId":16153,"journal":{"name":"Journal of Mechanical Engineering Research and Developments","volume":"55 1","pages":"28"},"PeriodicalIF":0.0000,"publicationDate":"2020-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":"{\"title\":\"Contradictory Postulates of Singularity\",\"authors\":\"Kyle A. Baker, Eryn A. Culton, Joshua A. Ten Eyck, Zachary Lewis, Timothy A. Sands\",\"doi\":\"10.5539/mer.v9n2p28\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Modification of rigid body angular momentum permits controlled rotational maneuvers, and one common momentum-exchange actuator contains challenging mathematical singularities that occur when the actuator geometrically aligns perpendicularly to the commanded torque direction. Substantial research has arisen toward singularity avoidance, singularity escape (when avoidance fails), and singularity penetration which permits safe flight through regions of singularity. The latter two in particular, singularity escape and penetration require mathematical calculations of singular and near-singular quantities (very large numbers) using constituent numbers that are sometimes very small. This dichotomy leads to interesting peculiarities in some specific geometries. This short communication critically evaluates three often spoke postulates for defining singularity and the axioms that accompany the postulates. Researchers using disparate postulates arrive at contradictory conclusions about singularities, and we examine these peculiarities, leading to a few conclusions. Singular conditions must never be declared in the abstract without consideration for the commanded maneuver (e.g. the claim “the CMG system is singular”). Seeking the true angular momentum capability at near-planar skew angles, this research concludes that performance prediction is difficult installations at low skew angles should be avoided whenever permissible to enhance abilities of mathematical calculations. It will be shown that maximum momentum performance is easily predicted at very high and very low skew angles, and performance will be shown to be lowest at mid-values of skew angle. Meanwhile, maximum singularity-free performance remains elusive at even modestly low skew-angles.\",\"PeriodicalId\":16153,\"journal\":{\"name\":\"Journal of Mechanical Engineering Research and Developments\",\"volume\":\"55 1\",\"pages\":\"28\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-01-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"5\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Mechanical Engineering Research and Developments\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.5539/mer.v9n2p28\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Mechanical Engineering Research and Developments","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5539/mer.v9n2p28","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
Modification of rigid body angular momentum permits controlled rotational maneuvers, and one common momentum-exchange actuator contains challenging mathematical singularities that occur when the actuator geometrically aligns perpendicularly to the commanded torque direction. Substantial research has arisen toward singularity avoidance, singularity escape (when avoidance fails), and singularity penetration which permits safe flight through regions of singularity. The latter two in particular, singularity escape and penetration require mathematical calculations of singular and near-singular quantities (very large numbers) using constituent numbers that are sometimes very small. This dichotomy leads to interesting peculiarities in some specific geometries. This short communication critically evaluates three often spoke postulates for defining singularity and the axioms that accompany the postulates. Researchers using disparate postulates arrive at contradictory conclusions about singularities, and we examine these peculiarities, leading to a few conclusions. Singular conditions must never be declared in the abstract without consideration for the commanded maneuver (e.g. the claim “the CMG system is singular”). Seeking the true angular momentum capability at near-planar skew angles, this research concludes that performance prediction is difficult installations at low skew angles should be avoided whenever permissible to enhance abilities of mathematical calculations. It will be shown that maximum momentum performance is easily predicted at very high and very low skew angles, and performance will be shown to be lowest at mid-values of skew angle. Meanwhile, maximum singularity-free performance remains elusive at even modestly low skew-angles.
期刊介绍:
The scopes of the journal include, but are not limited to, the following topics: • Thermal Engineering and Fluids Engineering • Mechanics • Kinematics, Dynamics, & Control of Mechanical Systems • Mechatronics, Robotics and Automation • Design, Manufacturing, & Product Development • Human and Machine Haptics Specific topics of interest include: Advanced Manufacturing Technology, Analysis and Decision of Industry & Manufacturing System, Applied Mechanics, Biomechanics, CAD/CAM Integration Technology, Complex Curve Design, Manufacturing & Application, Computational Mechanics, Computer-aided Geometric Design & Simulation, Fluid Dynamics, Fluid Mechanics, General mechanics, Geomechanics, Industrial Application of CAD, Machinery and Machine Design, Machine Vision and Learning, Material Science and Processing, Mechanical Power Engineering, Mechatronics and Robotics, Artificial Intelligence, PC Guided Design and Manufacture, Precision Manufacturing & Measurement, Precision Mechanics, Production Technology, Quality & Reliability Engineering, Renewable Energy Technologies, Science and Engineering Computing, Solid Mechanics, Structural Dynamics, System Dynamics and Simulation, Systems Science and Systems Engineering, Vehicle Dynamic Performance Simulation, Virtual-tech Based System & Process-simulation, etc.