Tilt Angle of Wood Dust

Tilt Angle of Wood Dust. The aim of this article is to point out a risk factor – wood dust, which settles on various structures, inclined surfaces in operation and, if not regularly cleaned, it is a source of secondary dust, because it is swirled up again with any movement. By measuring the tilt angle of bulk wood material obtained from sawing on a table circular saw, using different saw blades and wood dust from longitudinal and transverse sanding on a hand belt sander, we determined which characteristics affect it. We found that the size of the particles is an important characteristic, the larger they are, the smaller the tilt angle and also the surface of the pad on which the dust particles settle, wood did not play a significant role in this case. The smallest tilt angle was measured for sawdust from longitudinal sawing of 27, and the largest tilt angle for wood dust from transverse sanding of oak and was 57 on beech pad