蛋壳和碳酸钙增强再生铝绿色金属基体的评价

Q3 Engineering
L. M. Hasan, A. Ali
{"title":"蛋壳和碳酸钙增强再生铝绿色金属基体的评价","authors":"L. M. Hasan, A. Ali","doi":"10.5604/01.3001.0053.7662","DOIUrl":null,"url":null,"abstract":"In this study, an environmentally friendly metal matrix was prepared, and the influence of eggshell powder and CaCO3 particles on the tensile strength and hardness of recycled aluminium were assessed.A matrix made of recycled aluminium was employed. Calcium carbonate and eggshells served as the study's reinforcing materials. Separately, weight percentages of 2, 4, and 8% of eggshell and calcium carbonate were used. The samples were made by sand-casting.The results showed that both eggshell and calcium carbonate positively affect the hardness, yield, and ultimate tensile strength of recycled aluminium. The hardness values were improved as the percentage of the eggshell increased. The maximum hardness was achieved at 2% calcium carbonate. Similarly, the highest improvement of yield strength was for 2% CaCO3 addition, while the highest tensile strength was obtained at 8% eggshell addition.To get better results, it would be desirable to use finer eggshells than those utilized in this study.Composites made with an aluminium matrix exhibit exceptional mechanical and physical characteristics. The most challenging obstacle to overcome is the cost of metal matrix composites. Eggshells are a by-product that could be employed as a lightweight, affordable form of reinforcement. One way to get rid of this by-product, improve composite characteristics, and lower the cost of aluminium composite is to use eggshells.A comparative investigation was carried out to determine the effects of adding agricultural by-product eggshell, and commercial CaCO3 reinforcement material on the characteristics of recycled aluminium matrix integrated 425 m sized eggshell and CaCO3 separately as a reinforcement material to create a metal matrix that is beneficial to the environment.","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"30 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Assessment of eggshell and CaCO3 reinforced recycled aluminium green metal matrix\",\"authors\":\"L. M. Hasan, A. Ali\",\"doi\":\"10.5604/01.3001.0053.7662\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this study, an environmentally friendly metal matrix was prepared, and the influence of eggshell powder and CaCO3 particles on the tensile strength and hardness of recycled aluminium were assessed.A matrix made of recycled aluminium was employed. Calcium carbonate and eggshells served as the study's reinforcing materials. Separately, weight percentages of 2, 4, and 8% of eggshell and calcium carbonate were used. The samples were made by sand-casting.The results showed that both eggshell and calcium carbonate positively affect the hardness, yield, and ultimate tensile strength of recycled aluminium. The hardness values were improved as the percentage of the eggshell increased. The maximum hardness was achieved at 2% calcium carbonate. Similarly, the highest improvement of yield strength was for 2% CaCO3 addition, while the highest tensile strength was obtained at 8% eggshell addition.To get better results, it would be desirable to use finer eggshells than those utilized in this study.Composites made with an aluminium matrix exhibit exceptional mechanical and physical characteristics. The most challenging obstacle to overcome is the cost of metal matrix composites. Eggshells are a by-product that could be employed as a lightweight, affordable form of reinforcement. One way to get rid of this by-product, improve composite characteristics, and lower the cost of aluminium composite is to use eggshells.A comparative investigation was carried out to determine the effects of adding agricultural by-product eggshell, and commercial CaCO3 reinforcement material on the characteristics of recycled aluminium matrix integrated 425 m sized eggshell and CaCO3 separately as a reinforcement material to create a metal matrix that is beneficial to the environment.\",\"PeriodicalId\":14825,\"journal\":{\"name\":\"Journal of Achievements in Materials and Manufacturing Engineering\",\"volume\":\"30 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Achievements in Materials and Manufacturing Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.5604/01.3001.0053.7662\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Achievements in Materials and Manufacturing Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5604/01.3001.0053.7662","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

摘要

本研究制备了一种环保金属基体,考察了蛋壳粉和CaCO3颗粒对再生铝抗拉强度和硬度的影响。采用了由再生铝制成的基体。碳酸钙和蛋壳作为研究的增强材料。蛋壳和碳酸钙的重量百分比分别为2%、4%和8%。样品由砂型铸造而成。结果表明,蛋壳和碳酸钙对再生铝的硬度、屈服和极限抗拉强度均有积极影响。硬度值随蛋壳含量的增加而提高。在碳酸钙含量为2%时达到最大硬度。同样,CaCO3添加量为2%时,屈服强度提高幅度最大,蛋壳添加量为8%时,拉伸强度提高幅度最大。为了获得更好的结果,最好使用比本研究中使用的更细的蛋壳。由铝基制成的复合材料具有优异的机械和物理特性。需要克服的最具挑战性的障碍是金属基复合材料的成本。蛋壳是一种副产品,可以作为一种轻量级的、负担得起的加固形式。一种消除这种副产品,改善复合材料特性,降低铝复合材料成本的方法是使用蛋壳。通过对比研究,确定了添加农副产蛋壳和商用CaCO3增强材料对425 m尺寸鸡蛋和CaCO3分别作为增强材料的再生铝基特性的影响,从而形成有利于环境的金属基。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Assessment of eggshell and CaCO3 reinforced recycled aluminium green metal matrix
In this study, an environmentally friendly metal matrix was prepared, and the influence of eggshell powder and CaCO3 particles on the tensile strength and hardness of recycled aluminium were assessed.A matrix made of recycled aluminium was employed. Calcium carbonate and eggshells served as the study's reinforcing materials. Separately, weight percentages of 2, 4, and 8% of eggshell and calcium carbonate were used. The samples were made by sand-casting.The results showed that both eggshell and calcium carbonate positively affect the hardness, yield, and ultimate tensile strength of recycled aluminium. The hardness values were improved as the percentage of the eggshell increased. The maximum hardness was achieved at 2% calcium carbonate. Similarly, the highest improvement of yield strength was for 2% CaCO3 addition, while the highest tensile strength was obtained at 8% eggshell addition.To get better results, it would be desirable to use finer eggshells than those utilized in this study.Composites made with an aluminium matrix exhibit exceptional mechanical and physical characteristics. The most challenging obstacle to overcome is the cost of metal matrix composites. Eggshells are a by-product that could be employed as a lightweight, affordable form of reinforcement. One way to get rid of this by-product, improve composite characteristics, and lower the cost of aluminium composite is to use eggshells.A comparative investigation was carried out to determine the effects of adding agricultural by-product eggshell, and commercial CaCO3 reinforcement material on the characteristics of recycled aluminium matrix integrated 425 m sized eggshell and CaCO3 separately as a reinforcement material to create a metal matrix that is beneficial to the environment.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Achievements in Materials and Manufacturing Engineering
Journal of Achievements in Materials and Manufacturing Engineering Engineering-Industrial and Manufacturing Engineering
CiteScore
2.10
自引率
0.00%
发文量
15
期刊介绍: The Journal of Achievements in Materials and Manufacturing Engineering has been published by the Association for Computational Materials Science and Surface Engineering in collaboration with the World Academy of Materials and Manufacturing Engineering WAMME and the Section Metallic Materials of the Committee of Materials Science of the Polish Academy of Sciences as a monthly. It has 12 points which was received during the evaluation by the Ministry of Science and Higher Education journals and ICV 2017:100 on the ICI Journals Master list announced by the Index Copernicus. It is a continuation of "Proceedings on Achievements in Mechanical and Materials Engineering" published in 1992-2005. Scope: Materials[...] Properties[...] Methodology of Research[...] Analysis and Modelling[...] Manufacturing and Processingv Biomedical and Dental Engineering and Materials[...] Cleaner Production[...] Industrial Mangement and Organisation [...] Education and Research Trends[...]
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信