废轮胎橡胶颗粒为填料的剑麻纤维增强环氧复合材料的拉伸和弯曲强度研究

Yash K Pandya, Nirav P. Patel, Bhavin N. Patel, Nirav Suthar
{"title":"废轮胎橡胶颗粒为填料的剑麻纤维增强环氧复合材料的拉伸和弯曲强度研究","authors":"Yash K Pandya, Nirav P. Patel, Bhavin N. Patel, Nirav Suthar","doi":"10.1063/1.5130245","DOIUrl":null,"url":null,"abstract":"The world’s tendency toward utilizing reused materials requests new items from natural resources and waste polymers. In this work, composites made from waste rubber particles (average particle size: 320 mesh) and sisal fiber in unidirectional form with matrix material as epoxy resin were prepared by hand lay-up method & investigated the mechanical properties for the influence of waste rubber particle loading in natural fiber composite. The effect of different loading of waste rubber particle (0,5,10,20 %wt) on the tensile and flexural strength was investigated. The results represent that 5%wt waste rubber particle loading composite shows maximum tensile and flexural strength & further increase in rubber particle loading shows decrease in tensile & flexural strength.","PeriodicalId":20725,"journal":{"name":"PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS: ICAM 2019","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2019-10-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation of tensile and flexural strength of sisal fiber reinforced epoxy composite with waste tyre rubber particle as filler\",\"authors\":\"Yash K Pandya, Nirav P. Patel, Bhavin N. Patel, Nirav Suthar\",\"doi\":\"10.1063/1.5130245\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The world’s tendency toward utilizing reused materials requests new items from natural resources and waste polymers. In this work, composites made from waste rubber particles (average particle size: 320 mesh) and sisal fiber in unidirectional form with matrix material as epoxy resin were prepared by hand lay-up method & investigated the mechanical properties for the influence of waste rubber particle loading in natural fiber composite. The effect of different loading of waste rubber particle (0,5,10,20 %wt) on the tensile and flexural strength was investigated. The results represent that 5%wt waste rubber particle loading composite shows maximum tensile and flexural strength & further increase in rubber particle loading shows decrease in tensile & flexural strength.\",\"PeriodicalId\":20725,\"journal\":{\"name\":\"PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS: ICAM 2019\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-10-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS: ICAM 2019\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1063/1.5130245\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS: ICAM 2019","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1063/1.5130245","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

全世界都倾向于利用可重复使用的材料,这就要求从自然资源和废弃聚合物中提取新产品。以平均粒径为320目的废橡胶颗粒和单向形态的麻纤维为基体材料,以环氧树脂为基体材料,采用手工铺层法制备了废橡胶颗粒负载对天然纤维复合材料力学性能的影响。研究了废橡胶颗粒(0、5、10、20% wt)的不同载荷对拉伸和弯曲强度的影响。结果表明:废橡胶颗粒加载量为5%时,复合材料的拉伸和弯曲强度最大,随着废橡胶颗粒加载量的增加,复合材料的拉伸和弯曲强度减小。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Investigation of tensile and flexural strength of sisal fiber reinforced epoxy composite with waste tyre rubber particle as filler
The world’s tendency toward utilizing reused materials requests new items from natural resources and waste polymers. In this work, composites made from waste rubber particles (average particle size: 320 mesh) and sisal fiber in unidirectional form with matrix material as epoxy resin were prepared by hand lay-up method & investigated the mechanical properties for the influence of waste rubber particle loading in natural fiber composite. The effect of different loading of waste rubber particle (0,5,10,20 %wt) on the tensile and flexural strength was investigated. The results represent that 5%wt waste rubber particle loading composite shows maximum tensile and flexural strength & further increase in rubber particle loading shows decrease in tensile & flexural strength.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信