Monitoring and Calibration of Long Term Mooring System Design Assumptions Through Use of AIS and Weather Data

This paper outlines an approach on how to improve the mooring integrity of existing long term mooring systems by using existing and commercially available data. It will be demonstrated how the use of AIS and hindcast weather data can be used to increase understanding of mooring systems and to monitor and quantify gaps between "as-designed", "as-installed" and "as-is" of a long term mooring system. Long term moored units have traditionally suffered from many early failures, caused by damages and errors introduced in the installation phase, and costly and unnecessary "late in life" failures. A fact rated high on the agenda of the underwriters. Numerous papers have been written on this topic, but it is only in recent years the industry have started to ensure that systems are inspected to a sufficient degree with respect to the physical condition, taking these learnings into account. However, the second important element, the calibration of the mooring analysis vs. actual vessel and mooring system behavior/performance, have not yet gotten the attention required. Deviations from the intended design are introduced in the installation phase of a mooring system. In addition, the design assumptions will never be fully accurate. The gap between the design assumptions and the actual system will increase over time, and the industry today do not focus on mapping and quantifying the effect of this gap sufficiently. The described method explains how one can introduce a pro-active approach, without installing onboard equipment, but rather utilizing algorithms on existing data and design documentation. This paper focuses on the use of AIS data in combination with historic weather/environmental data and seek to demonstrate how this low-cost method can provide useful information with respect to the mooring system. To emphasize the mapped importance of such calibrations, the July 2021 Edition of the in-service DNV Class Rules, DNVGL-OS-0300, formally introduces requirements to calibration of design assumptions of long term mooring units through use of survey data, service history and actual mooring system behavior in order to ensure a unit's mooring system condition and performance is known in light of the original design assumptions.