zro2增强多孔莫来石陶瓷的制备与表征

IF 1.3 4区材料科学 Q3 MATERIALS SCIENCE, CERAMICS

Advances in Applied Ceramics Pub Date : 2022-07-01 DOI:10.1080/17436753.2022.2155369

Pengyu Ji, Chenghao Song, Yongwan Wu, Hailiang Deng, X. Deng, Yi Zhang, Xiang-jin Ding, Haijun Zhang, S. Ran

{"title":"zro2增强多孔莫来石陶瓷的制备与表征","authors":"Pengyu Ji, Chenghao Song, Yongwan Wu, Hailiang Deng, X. Deng, Yi Zhang, Xiang-jin Ding, Haijun Zhang, S. Ran","doi":"10.1080/17436753.2022.2155369","DOIUrl":null,"url":null,"abstract":"ABSTRACT ZrO2-reinforced porous mullite ceramics were fabricated by a foam-gel casting approach using zircon (ZrSiO4) powders and alumina (Al2O3) powders as raw materials. The influence of firing temperature on the phase composition of porous samples was analysed. Based on the analysis results, the effects of a blowing agent on the physical properties, microstructure, mechanical strength and heat conductivity of ZrO2-reinforced porous mullite samples fired at 1600°C were investigated. In the present study, linear shrinkage, porosity and mean pore size of ZrO2-reinforced porous mullite ceramics increased, and volume density, mechanical strength and heat conductivity decreased. When the dosage of the blowing agent was 1.0 vol.-%, the flexural strength and compressive strength of ZrO2-reinforced porous mullite sample with 77.4% porosity respectively reached 3.0 and 10.9 MPa, and their heat conductivity was kept at 0.181 W m−1 K−1.","PeriodicalId":7224,"journal":{"name":"Advances in Applied Ceramics","volume":null,"pages":null},"PeriodicalIF":1.3000,"publicationDate":"2022-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Fabrication and characterisation of ZrO2-reinforced porous mullite ceramics\",\"authors\":\"Pengyu Ji, Chenghao Song, Yongwan Wu, Hailiang Deng, X. Deng, Yi Zhang, Xiang-jin Ding, Haijun Zhang, S. Ran\",\"doi\":\"10.1080/17436753.2022.2155369\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"ABSTRACT ZrO2-reinforced porous mullite ceramics were fabricated by a foam-gel casting approach using zircon (ZrSiO4) powders and alumina (Al2O3) powders as raw materials. The influence of firing temperature on the phase composition of porous samples was analysed. Based on the analysis results, the effects of a blowing agent on the physical properties, microstructure, mechanical strength and heat conductivity of ZrO2-reinforced porous mullite samples fired at 1600°C were investigated. In the present study, linear shrinkage, porosity and mean pore size of ZrO2-reinforced porous mullite ceramics increased, and volume density, mechanical strength and heat conductivity decreased. When the dosage of the blowing agent was 1.0 vol.-%, the flexural strength and compressive strength of ZrO2-reinforced porous mullite sample with 77.4% porosity respectively reached 3.0 and 10.9 MPa, and their heat conductivity was kept at 0.181 W m−1 K−1.\",\"PeriodicalId\":7224,\"journal\":{\"name\":\"Advances in Applied Ceramics\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.3000,\"publicationDate\":\"2022-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Advances in Applied Ceramics\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1080/17436753.2022.2155369\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advances in Applied Ceramics","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/17436753.2022.2155369","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}

引用次数: 0

摘要

摘要:以锆英石(ZrSiO4)粉末和氧化铝(Al2O3)粉末为原料，采用泡沫-凝胶铸造法制备了zro2增强多孔莫来石陶瓷。分析了烧结温度对多孔试样相组成的影响。在此基础上，研究了发泡剂对1600℃焙烧zro2增强多孔莫来石的物理性能、微观结构、机械强度和导热性能的影响。在本研究中，zro2增强多孔莫来石陶瓷的线收缩率、孔隙率和平均孔径增大，体积密度、机械强度和导热系数减小。当发泡剂用量为1.0 vol.-%时，孔隙率为77.4%的zro2增强多孔莫来石试样的抗折强度和抗压强度分别达到3.0和10.9 MPa，导热系数保持在0.181 W m−1 K−1。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Fabrication and characterisation of ZrO2-reinforced porous mullite ceramics

ABSTRACT ZrO2-reinforced porous mullite ceramics were fabricated by a foam-gel casting approach using zircon (ZrSiO4) powders and alumina (Al2O3) powders as raw materials. The influence of firing temperature on the phase composition of porous samples was analysed. Based on the analysis results, the effects of a blowing agent on the physical properties, microstructure, mechanical strength and heat conductivity of ZrO2-reinforced porous mullite samples fired at 1600°C were investigated. In the present study, linear shrinkage, porosity and mean pore size of ZrO2-reinforced porous mullite ceramics increased, and volume density, mechanical strength and heat conductivity decreased. When the dosage of the blowing agent was 1.0 vol.-%, the flexural strength and compressive strength of ZrO2-reinforced porous mullite sample with 77.4% porosity respectively reached 3.0 and 10.9 MPa, and their heat conductivity was kept at 0.181 W m−1 K−1.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Advances in Applied Ceramics 工程技术-材料科学：硅酸盐

CiteScore

4.40

自引率

4.50%

发文量

审稿时长

5.2 months

期刊介绍： Advances in Applied Ceramics: Structural, Functional and Bioceramics provides international coverage of high-quality research on functional ceramics, engineering ceramics and bioceramics.