基于dfig的模糊逻辑控制风能转换系统实验研究

Q3 Computer Science

Periodica polytechnica Electrical engineering and computer science Pub Date : 2023-05-17 DOI:10.3311/ppee.21233

M. Hallouz, N. Kabeche, S. Moulahoum, Z. Kechidi

{"title":"基于dfig的模糊逻辑控制风能转换系统实验研究","authors":"M. Hallouz, N. Kabeche, S. Moulahoum, Z. Kechidi","doi":"10.3311/ppee.21233","DOIUrl":null,"url":null,"abstract":"In this paper, an experimental study of a Wind Energy Conversion System (WECS) is performed. A test bench with a power of 1.5 kW is setup. The system consists of a Doubly-Fed Induction Generator (DFIG) and a wind emulator based on a DC motor associated with a Maximum Power Point Tracking (MPPT) control. The proposed emulator is driven by a four quadrants DC/DC converter to produce a real wind turbine behavior. The aim of this work is to improve the DIFG performances by using the fuzzy logic-based intelligent controller. This control technic is designed to monitor the stator reactive and active powers. This can be achieved by the DFIG rotor side converter (RSC) using the field-oriented control. The experimental setup uses a dSPACE DS1104 device, MATLAB/Simulink software and a ControlDesk interface. The paper shows that, the desired amount of active and reactive powers has been independently controlled and the implementation is successfully verified the effectiveness of the proposed control scheme achieved using the FLC strategy.","PeriodicalId":37664,"journal":{"name":"Periodica polytechnica Electrical engineering and computer science","volume":"36 1","pages":"260-267"},"PeriodicalIF":0.0000,"publicationDate":"2023-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental Investigation of DFIG-based Wind Energy Conversion System Using Fuzzy Logic Control\",\"authors\":\"M. Hallouz, N. Kabeche, S. Moulahoum, Z. Kechidi\",\"doi\":\"10.3311/ppee.21233\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, an experimental study of a Wind Energy Conversion System (WECS) is performed. A test bench with a power of 1.5 kW is setup. The system consists of a Doubly-Fed Induction Generator (DFIG) and a wind emulator based on a DC motor associated with a Maximum Power Point Tracking (MPPT) control. The proposed emulator is driven by a four quadrants DC/DC converter to produce a real wind turbine behavior. The aim of this work is to improve the DIFG performances by using the fuzzy logic-based intelligent controller. This control technic is designed to monitor the stator reactive and active powers. This can be achieved by the DFIG rotor side converter (RSC) using the field-oriented control. The experimental setup uses a dSPACE DS1104 device, MATLAB/Simulink software and a ControlDesk interface. The paper shows that, the desired amount of active and reactive powers has been independently controlled and the implementation is successfully verified the effectiveness of the proposed control scheme achieved using the FLC strategy.\",\"PeriodicalId\":37664,\"journal\":{\"name\":\"Periodica polytechnica Electrical engineering and computer science\",\"volume\":\"36 1\",\"pages\":\"260-267\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-05-17\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Periodica polytechnica Electrical engineering and computer science\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3311/ppee.21233\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Computer Science\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Periodica polytechnica Electrical engineering and computer science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3311/ppee.21233","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Computer Science","Score":null,"Total":0}

引用次数: 0

摘要

本文对风能转换系统(WECS)进行了实验研究。建立了功率为1.5 kW的试验台。该系统由一个双馈感应发电机(DFIG)和一个基于直流电机的风模拟器组成，该模拟器与最大功率点跟踪(MPPT)控制相关联。该仿真器由四象限DC/DC变换器驱动，以模拟真实的风力机行为。本文的目的是利用基于模糊逻辑的智能控制器来提高DIFG的性能。该控制技术用于监测定子无功和有功功率。这可以通过采用磁场定向控制的DFIG转子侧变换器(RSC)来实现。实验装置采用dSPACE DS1104器件、MATLAB/Simulink软件和ControlDesk接口。结果表明，所提出的有功功率和无功功率均可独立控制，并成功地验证了采用FLC策略实现的控制方案的有效性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Experimental Investigation of DFIG-based Wind Energy Conversion System Using Fuzzy Logic Control

In this paper, an experimental study of a Wind Energy Conversion System (WECS) is performed. A test bench with a power of 1.5 kW is setup. The system consists of a Doubly-Fed Induction Generator (DFIG) and a wind emulator based on a DC motor associated with a Maximum Power Point Tracking (MPPT) control. The proposed emulator is driven by a four quadrants DC/DC converter to produce a real wind turbine behavior. The aim of this work is to improve the DIFG performances by using the fuzzy logic-based intelligent controller. This control technic is designed to monitor the stator reactive and active powers. This can be achieved by the DFIG rotor side converter (RSC) using the field-oriented control. The experimental setup uses a dSPACE DS1104 device, MATLAB/Simulink software and a ControlDesk interface. The paper shows that, the desired amount of active and reactive powers has been independently controlled and the implementation is successfully verified the effectiveness of the proposed control scheme achieved using the FLC strategy.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Periodica polytechnica Electrical engineering and computer science Engineering-Electrical and Electronic Engineering

CiteScore

2.60

自引率

0.00%

发文量

期刊介绍： The main scope of the journal is to publish original research articles in the wide field of electrical engineering and informatics fitting into one of the following five Sections of the Journal: (i) Communication systems, networks and technology, (ii) Computer science and information theory, (iii) Control, signal processing and signal analysis, medical applications, (iv) Components, Microelectronics and Material Sciences, (v) Power engineering and mechatronics, (vi) Mobile Software, Internet of Things and Wearable Devices, (vii) Solid-state lighting and (viii) Vehicular Technology (land, airborne, and maritime mobile services; automotive, radar systems; antennas and radio wave propagation).