硫酸钠对smr10基压敏胶粘度、粘性和粘接性能的影响

IF 1.4 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Journal of Elastomers and Plastics Pub Date : 2011-01-01 DOI:10.1177/0095244310383545

I. Khan, B. T. Poh, C. Badriah

{"title":"硫酸钠对smr10基压敏胶粘度、粘性和粘接性能的影响","authors":"I. Khan, B. T. Poh, C. Badriah","doi":"10.1177/0095244310383545","DOIUrl":null,"url":null,"abstract":"The effect of sodium sulfate as filler on viscosity, tack, and adhesion properties of Standard Malaysian Rubber (SMR 10)-based pressure-sensitive adhesive were studied. Coumarone-indene resin and toluene were used as the tackifier and solvent respectively throughout the experiment. The results show that viscosity of adhesive increases with addition of sodium sulfate. For rolling ball tack test, the distance traveled by rolling ball decreases with increasing sodium sulfate concentration indicating the increase of tack value with sodium sulfate. The distance traveled by the rolling ball decreases with coating thickness of adhesive. For cross-hatch adhesion test, result shows that maximum adhesion occurs between 30 and 40 parts per hundred parts of rubber (phr) of sodium sulfate content, an observation which is attributed to the maximum of wettability of adhesive. The 60 μm of adhesive coating thickness shows good performance of adhesion property of SMR 10-based pressure-sensitive adhesive.","PeriodicalId":15644,"journal":{"name":"Journal of Elastomers and Plastics","volume":"68 1","pages":"85 - 95"},"PeriodicalIF":1.4000,"publicationDate":"2011-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"10","resultStr":"{\"title\":\"Effect of Sodium Sulfate on the Viscosity, Tack, and Adhesion Properties of SMR 10-based Pressure-sensitive Adhesive\",\"authors\":\"I. Khan, B. T. Poh, C. Badriah\",\"doi\":\"10.1177/0095244310383545\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The effect of sodium sulfate as filler on viscosity, tack, and adhesion properties of Standard Malaysian Rubber (SMR 10)-based pressure-sensitive adhesive were studied. Coumarone-indene resin and toluene were used as the tackifier and solvent respectively throughout the experiment. The results show that viscosity of adhesive increases with addition of sodium sulfate. For rolling ball tack test, the distance traveled by rolling ball decreases with increasing sodium sulfate concentration indicating the increase of tack value with sodium sulfate. The distance traveled by the rolling ball decreases with coating thickness of adhesive. For cross-hatch adhesion test, result shows that maximum adhesion occurs between 30 and 40 parts per hundred parts of rubber (phr) of sodium sulfate content, an observation which is attributed to the maximum of wettability of adhesive. The 60 μm of adhesive coating thickness shows good performance of adhesion property of SMR 10-based pressure-sensitive adhesive.\",\"PeriodicalId\":15644,\"journal\":{\"name\":\"Journal of Elastomers and Plastics\",\"volume\":\"68 1\",\"pages\":\"85 - 95\"},\"PeriodicalIF\":1.4000,\"publicationDate\":\"2011-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"10\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Elastomers and Plastics\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1177/0095244310383545\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Elastomers and Plastics","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1177/0095244310383545","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 10

摘要

研究了硫酸钠作为填料对马来西亚标准橡胶(smr10)基压敏胶粘度、黏度和粘接性能的影响。在整个实验过程中，香豆素树脂和甲苯分别作为增粘剂和溶剂。结果表明，随着硫酸钠的加入，胶粘剂的粘度增大。滚球黏着试验中，随着硫酸钠浓度的增加，滚球所走的距离减小，表明硫酸钠的黏着值增大。随着胶粘剂涂层厚度的增加，滚动球的运动距离减小。在交叉舱口粘接试验中，结果表明，在硫酸钠含量的橡胶(phr)中，最大粘接发生在30 ~ 40份橡胶(phr)之间，这一观察结果归因于粘合剂的最大润湿性。SMR - 10基压敏胶在60 μm的粘接层厚度下具有良好的粘接性能。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of Sodium Sulfate on the Viscosity, Tack, and Adhesion Properties of SMR 10-based Pressure-sensitive Adhesive

The effect of sodium sulfate as filler on viscosity, tack, and adhesion properties of Standard Malaysian Rubber (SMR 10)-based pressure-sensitive adhesive were studied. Coumarone-indene resin and toluene were used as the tackifier and solvent respectively throughout the experiment. The results show that viscosity of adhesive increases with addition of sodium sulfate. For rolling ball tack test, the distance traveled by rolling ball decreases with increasing sodium sulfate concentration indicating the increase of tack value with sodium sulfate. The distance traveled by the rolling ball decreases with coating thickness of adhesive. For cross-hatch adhesion test, result shows that maximum adhesion occurs between 30 and 40 parts per hundred parts of rubber (phr) of sodium sulfate content, an observation which is attributed to the maximum of wettability of adhesive. The 60 μm of adhesive coating thickness shows good performance of adhesion property of SMR 10-based pressure-sensitive adhesive.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of Elastomers and Plastics 工程技术-材料科学：综合

CiteScore

3.30

自引率

5.90%

发文量

审稿时长

6 months

期刊介绍： The Journal of Elastomers and Plastics is a high quality peer-reviewed journal which publishes original research on the development and marketing of elastomers and plastics and the area in between where the characteristics of both extremes are apparent. The journal covers: advances in chemistry, processing, properties and applications; new information on thermoplastic elastomers, reinforced elastomers, natural rubbers, blends and alloys, and fillers and additives.