{"title":"一种新型复合电磁直线执行器在不同工作模式和工况下的损耗分析","authors":"X. Fan, Chengzhi Xie, Zhibing Zhu, Y. Li","doi":"10.3233/jae-220185","DOIUrl":null,"url":null,"abstract":"As an important actuator component, the electromagnetic linear actuator has a significant impact on the performance of fully flexible variable valve trains. Aiming at the shortcomings of the conventional moving coil electromagnetic linear actuator (MCELA) with low force density and insufficient end-passive self-holding ability, a novel compound electromagnetic linear actuator (CELA) integrating the advantages of MCELA and the moving iron electromagnetic linear actuator (MIELA) was proposed in this work. The CELA has two operating modes, including single drive mode and cooperative drive mode, and its loss variation is different from that of the single MCELA or MIELA. Firstly, the current and displacement curves under different operating modes were obtained through experiments, which were then used as the excitation source to quantitatively analyze the copper and iron losses under different working conditions by means of 3D finite element simulation. The loss distribution and ratio of CELA under typical operating conditions were discussed in detail. The effects of stroke and valve opening duration on CELA losses were analyzed. The results show that there are significant differences in the loss variation rules between the two operating modes, the losses increase as the working stroke increases in single drive mode. In the cooperative drive mode, the losses are much greater than in the single drive mode, with the losses decreasing in the initial stage and then increasing as the stroke increases. None of the valve opening durations had a significant effect on losses. This study provides a reference for loss studies of other novel electromagnetic linear actuators.","PeriodicalId":50340,"journal":{"name":"International Journal of Applied Electromagnetics and Mechanics","volume":"160 1 1","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2023-02-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Loss analysis of a novel compound electromagnetic linear actuator under different operating modes and working conditions\",\"authors\":\"X. Fan, Chengzhi Xie, Zhibing Zhu, Y. Li\",\"doi\":\"10.3233/jae-220185\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"As an important actuator component, the electromagnetic linear actuator has a significant impact on the performance of fully flexible variable valve trains. Aiming at the shortcomings of the conventional moving coil electromagnetic linear actuator (MCELA) with low force density and insufficient end-passive self-holding ability, a novel compound electromagnetic linear actuator (CELA) integrating the advantages of MCELA and the moving iron electromagnetic linear actuator (MIELA) was proposed in this work. The CELA has two operating modes, including single drive mode and cooperative drive mode, and its loss variation is different from that of the single MCELA or MIELA. Firstly, the current and displacement curves under different operating modes were obtained through experiments, which were then used as the excitation source to quantitatively analyze the copper and iron losses under different working conditions by means of 3D finite element simulation. The loss distribution and ratio of CELA under typical operating conditions were discussed in detail. The effects of stroke and valve opening duration on CELA losses were analyzed. The results show that there are significant differences in the loss variation rules between the two operating modes, the losses increase as the working stroke increases in single drive mode. In the cooperative drive mode, the losses are much greater than in the single drive mode, with the losses decreasing in the initial stage and then increasing as the stroke increases. None of the valve opening durations had a significant effect on losses. This study provides a reference for loss studies of other novel electromagnetic linear actuators.\",\"PeriodicalId\":50340,\"journal\":{\"name\":\"International Journal of Applied Electromagnetics and Mechanics\",\"volume\":\"160 1 1\",\"pages\":\"\"},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-02-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Applied Electromagnetics and Mechanics\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.3233/jae-220185\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Applied Electromagnetics and Mechanics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3233/jae-220185","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
Loss analysis of a novel compound electromagnetic linear actuator under different operating modes and working conditions
As an important actuator component, the electromagnetic linear actuator has a significant impact on the performance of fully flexible variable valve trains. Aiming at the shortcomings of the conventional moving coil electromagnetic linear actuator (MCELA) with low force density and insufficient end-passive self-holding ability, a novel compound electromagnetic linear actuator (CELA) integrating the advantages of MCELA and the moving iron electromagnetic linear actuator (MIELA) was proposed in this work. The CELA has two operating modes, including single drive mode and cooperative drive mode, and its loss variation is different from that of the single MCELA or MIELA. Firstly, the current and displacement curves under different operating modes were obtained through experiments, which were then used as the excitation source to quantitatively analyze the copper and iron losses under different working conditions by means of 3D finite element simulation. The loss distribution and ratio of CELA under typical operating conditions were discussed in detail. The effects of stroke and valve opening duration on CELA losses were analyzed. The results show that there are significant differences in the loss variation rules between the two operating modes, the losses increase as the working stroke increases in single drive mode. In the cooperative drive mode, the losses are much greater than in the single drive mode, with the losses decreasing in the initial stage and then increasing as the stroke increases. None of the valve opening durations had a significant effect on losses. This study provides a reference for loss studies of other novel electromagnetic linear actuators.
期刊介绍:
The aim of the International Journal of Applied Electromagnetics and Mechanics is to contribute to intersciences coupling applied electromagnetics, mechanics and materials. The journal also intends to stimulate the further development of current technology in industry. The main subjects covered by the journal are:
Physics and mechanics of electromagnetic materials and devices
Computational electromagnetics in materials and devices
Applications of electromagnetic fields and materials
The three interrelated key subjects – electromagnetics, mechanics and materials - include the following aspects: electromagnetic NDE, electromagnetic machines and devices, electromagnetic materials and structures, electromagnetic fluids, magnetoelastic effects and magnetosolid mechanics, magnetic levitations, electromagnetic propulsion, bioelectromagnetics, and inverse problems in electromagnetics.
The editorial policy is to combine information and experience from both the latest high technology fields and as well as the well-established technologies within applied electromagnetics.