Crystal Structure, Magnetic, and Dielectric Properties of (x)CoFe2O4–(1−x)Ba0.8Sr0.2TiO3 Multiferroics

The composites (x)CoFe2O4–(1−x)Ba0.8Sr0.2TiO3 are prepared by solid‐state reaction method using microwave double‐step sintering. Ba0.8Sr0.2TiO3 crystallizes to tetragonal crystal symmetry with P4mm space group and CoFe2O4 crystallizes to cubic crystal symmetry with Fd3¯m space group. Electron microscopy techniques are used to understand the microstructure, elemental composition, and morphology of the composites. The dielectric properties are measured in the 1 Hz–1 MHz frequency range and 40–400 °C temperature range. Composite with x = 0.1 (ε′ ≈ 170, tan δ = 0.08 at 1 kHz) and 0.2 (ε′ ≈ 390, tan δ = 0.07 at 1 kHz) has better dielectric properties than the parent Ba0.8Sr0.2TiO3 ferroelectric (ε′ ≈ 125, tan δ = 0.16 at 1 kHz) and CoFe2O4 ferrimagnetic phases (ε′ ≈ 375, tan δ = 0.72 at 1 kHz), respectively. Composite with 10% cobalt ferrite has the highest saturation polarization (2.1 μC cm−2), the highest remanent polarization (0.9 μC cm−2), and coercive field (23.9 kV cm−1) compared to ferroelectric phase followed by x = 0.2 composite (PS = 1.6 μC cm−2, Pr = 0.8 μC cm−2, and EC = 19.2 kV cm−1). Composite with x = 0.2 shows the highest magnetic coercive field of 1.96 kOe. Hence, this article advocates that 20% ferrite in the composites is the optimized composition for multiferroic applications. The present study will help to explore piezoelectric, magnetostrictive, and magnetoelectric properties of (x)CoFe2O4–(1−x)Ba0.8Sr0.2TiO3 for the technological application.