基于纳秒激光的铝合金表面尺寸控制微结构制备

2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) Pub Date : 2017-08-01 DOI:10.1109/3M-NANO.2017.8286309

Yanling Wan, Lining Xu, Jinkai Xu, Jing Li, Yonghua Wang

{"title":"基于纳秒激光的铝合金表面尺寸控制微结构制备","authors":"Yanling Wan, Lining Xu, Jinkai Xu, Jing Li, Yonghua Wang","doi":"10.1109/3M-NANO.2017.8286309","DOIUrl":null,"url":null,"abstract":"Aluminum alloy surface was machined by nanosecond laser equipment, and the effect of different processing parameters on the microstructure of aluminum alloy surface was studied. The surface microstructure was observed by scanning electron microscopy and confocal microscopy. Surface hydrophobicity was evaluated with deionized water. The experiment results show that, by controlling the machining parameters, the surface microstructure morphology can be designed and controlled, at the same time, the influence of processing parameters on microstructure depth and width are also determined.","PeriodicalId":6582,"journal":{"name":"2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","volume":"29 1","pages":"161-164"},"PeriodicalIF":0.0000,"publicationDate":"2017-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Fabrication of size-controlled microstructures of Al alloy surface based on nanosecond laser\",\"authors\":\"Yanling Wan, Lining Xu, Jinkai Xu, Jing Li, Yonghua Wang\",\"doi\":\"10.1109/3M-NANO.2017.8286309\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Aluminum alloy surface was machined by nanosecond laser equipment, and the effect of different processing parameters on the microstructure of aluminum alloy surface was studied. The surface microstructure was observed by scanning electron microscopy and confocal microscopy. Surface hydrophobicity was evaluated with deionized water. The experiment results show that, by controlling the machining parameters, the surface microstructure morphology can be designed and controlled, at the same time, the influence of processing parameters on microstructure depth and width are also determined.\",\"PeriodicalId\":6582,\"journal\":{\"name\":\"2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"volume\":\"29 1\",\"pages\":\"161-164\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/3M-NANO.2017.8286309\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/3M-NANO.2017.8286309","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

采用纳秒激光设备对铝合金表面进行加工，研究了不同加工参数对铝合金表面组织的影响。用扫描电镜和共聚焦显微镜观察了表面微观结构。用去离子水评价表面疏水性。实验结果表明，通过控制加工参数，可以设计和控制表面微观组织形态，同时确定加工参数对微观组织深度和宽度的影响。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Fabrication of size-controlled microstructures of Al alloy surface based on nanosecond laser

Aluminum alloy surface was machined by nanosecond laser equipment, and the effect of different processing parameters on the microstructure of aluminum alloy surface was studied. The surface microstructure was observed by scanning electron microscopy and confocal microscopy. Surface hydrophobicity was evaluated with deionized water. The experiment results show that, by controlling the machining parameters, the surface microstructure morphology can be designed and controlled, at the same time, the influence of processing parameters on microstructure depth and width are also determined.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2017 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)

自引率

0.00%

发文量