METHODS FOR REDUCING NOTCH SENSITIVITY OF HYBRID PSEUDO-DUCTILE POLYMER COMPOSITES WITH FABRIC REINFORCEMENT: EXPERIMENTAL STUDY

Composite materials reinforced with synthetic fibres have been used in aviation and space technology for more than half a century. Fibre-reinforced composites with high specific strength and corrosion resistance are an attractive alternative to traditional structural materials, including steels, aluminium and titanium alloys. At the same time, composites based on carbon and glass fibres are inherently brittle structural materials with high strength sensitivity to stress concentrations due to the design features of the structures or defects that occur in operation. One way to solve this problem is hybridisation which makes it possible to increase the nonlinearity of the composite stress-strain diagram and reduce sensitivity to notches. Hybrid composites combine several types of reinforcing filler with different fracture strains and exhibit a pronounced pseudo-ductile plateau in tension. Such material behaviour ensures the redistribution of stresses near the concentrator and potentially reduce notch sensitivity. When designing hybrids, it is necessary to take into account the influence of different factors including the ratio between the components and their lay-up, using various technological methods, and the specific strength of the finished material. This paper presents the results of an experimental study on the strength of hybrid composites based on glass and carbon fabrics in the open hole tests. It was found that hybrids with an extended hardening area after the pseudo-yield plateau are were more notch sensitive. A low elongation component layers rotation on angles up to 10°, as well as the use of thin polymer veils, also reduce the sensitivity of the composite strength to the presence of the defects.