在芯片设计中运用信息技术进行芯片的工艺生产

E3S Web of Conferences Pub Date : 2023-01-01 DOI:10.1051/e3sconf/202339003027

V. Sivakov, S. Gryadunov, A. Buglaev, M.I. Lushpaeva, O. Timokhova, V. Makarov

{"title":"在芯片设计中运用信息技术进行芯片的工艺生产","authors":"V. Sivakov, S. Gryadunov, A. Buglaev, M.I. Lushpaeva, O. Timokhova, V. Makarov","doi":"10.1051/e3sconf/202339003027","DOIUrl":null,"url":null,"abstract":"Currently, there is an acute problem of reducing the harmful effects of humans on the environment, the introduction of resource-saving technologies that allow the maximum use of natural raw materials with a minimum percentage of waste. In the production of products at wood working and sawmill enterprises, a large amount of wood waste is generated that requires either disposal or use for the production of wood chips and shavings used in the production of chipboard, OSB boards, fuel briquettes and pellets. Processing of wood waste is carried out in various chippers of a stationary and mobile type, while it must be taken into account that a large amount of wood waste is generated in cutting areas, lower warehouses of enterprises, therefore, mobile chippers must be used for their processing. Given that the diameter of the chipping disc can exceed 1000 mm at a speed of up to 1500 rpm, during the operation of the chipper, significant loads on the working tool and vibration occur, which can lead to its failure. Vibration during the operation of the chipper can be the result of both design errors and occur when the cutting knives are blunt.","PeriodicalId":11445,"journal":{"name":"E3S Web of Conferences","volume":"1 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The use of information technology in the design of chippers for the production of technological chips\",\"authors\":\"V. Sivakov, S. Gryadunov, A. Buglaev, M.I. Lushpaeva, O. Timokhova, V. Makarov\",\"doi\":\"10.1051/e3sconf/202339003027\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Currently, there is an acute problem of reducing the harmful effects of humans on the environment, the introduction of resource-saving technologies that allow the maximum use of natural raw materials with a minimum percentage of waste. In the production of products at wood working and sawmill enterprises, a large amount of wood waste is generated that requires either disposal or use for the production of wood chips and shavings used in the production of chipboard, OSB boards, fuel briquettes and pellets. Processing of wood waste is carried out in various chippers of a stationary and mobile type, while it must be taken into account that a large amount of wood waste is generated in cutting areas, lower warehouses of enterprises, therefore, mobile chippers must be used for their processing. Given that the diameter of the chipping disc can exceed 1000 mm at a speed of up to 1500 rpm, during the operation of the chipper, significant loads on the working tool and vibration occur, which can lead to its failure. Vibration during the operation of the chipper can be the result of both design errors and occur when the cutting knives are blunt.\",\"PeriodicalId\":11445,\"journal\":{\"name\":\"E3S Web of Conferences\",\"volume\":\"1 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"E3S Web of Conferences\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1051/e3sconf/202339003027\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"E3S Web of Conferences","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1051/e3sconf/202339003027","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

目前，有一个严重的问题是减少人类对环境的有害影响，采用节约资源的技术，使天然原料得到最大限度的利用，浪费的百分比最少。在木材加工和锯木厂企业的产品生产中，产生了大量的木材废料，这些木材废料要么需要处理，要么需要用于生产刨花板、OSB板、燃料压块和颗粒的木屑和刨花。木材废料的处理是在固定式和移动式的各种削片机中进行的，同时必须考虑到大量的木材废料是在企业的切割区域、较低的仓库中产生的，因此必须使用移动式削片机进行处理。由于切屑盘直径可超过1000mm，转速可达1500rpm，切屑机在工作过程中，会对刀具产生较大的载荷和振动，从而导致其失效。切屑机工作时的振动可能是设计错误和切削刀钝时产生的结果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

The use of information technology in the design of chippers for the production of technological chips

Currently, there is an acute problem of reducing the harmful effects of humans on the environment, the introduction of resource-saving technologies that allow the maximum use of natural raw materials with a minimum percentage of waste. In the production of products at wood working and sawmill enterprises, a large amount of wood waste is generated that requires either disposal or use for the production of wood chips and shavings used in the production of chipboard, OSB boards, fuel briquettes and pellets. Processing of wood waste is carried out in various chippers of a stationary and mobile type, while it must be taken into account that a large amount of wood waste is generated in cutting areas, lower warehouses of enterprises, therefore, mobile chippers must be used for their processing. Given that the diameter of the chipping disc can exceed 1000 mm at a speed of up to 1500 rpm, during the operation of the chipper, significant loads on the working tool and vibration occur, which can lead to its failure. Vibration during the operation of the chipper can be the result of both design errors and occur when the cutting knives are blunt.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

E3S Web of Conferences Energy-Energy (all)

CiteScore

0.90

自引率

0.00%

发文量

1133

期刊介绍： E3S Web of Conferences is an Open Access publication series dedicated to archiving conference proceedings in all areas related to Environment, Energy and Earth Sciences. The journal covers the technological and scientific aspects as well as social and economic matters. Major disciplines include: soil sciences, hydrology, oceanography, climatology, geology, geography, energy engineering (production, distribution and storage), renewable energy, sustainable development, natural resources management… E3S Web of Conferences offers a wide range of services from the organization of the submission of conference proceedings to the worldwide dissemination of the conference papers. It provides an efficient archiving solution, ensuring maximum exposure and wide indexing of scientific conference proceedings. Proceedings are published under the scientific responsibility of the conference editors.