{"title":"掺银 Ti3C2Tx 传感器:有望用于低浓度 H2S 气体传感的候选器件","authors":"Fuping Zeng, Xiaoxuan Feng, Xiaoyue Chen, Hao Qiu, Yiming Yan, Qiang Yao, Ju Tang","doi":"10.1049/hve2.12376","DOIUrl":null,"url":null,"abstract":"<p>Trace hydrogen sulphide (H<sub>2</sub>S) could reflect the severity of insulation faults in gas-insulated switchgear (GIS), therefore, accurate and fast detection of low-concentration H<sub>2</sub>S is important for on-line monitoring, fault diagnosis, and state evaluation in GIS. Ag-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> chemiresistive-type sensors were fabricated via drop-coating with self-reduction synthesised Ag-doped Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub>. The as-prepared sensors exhibited an excellent sensitivity and selectivity to H<sub>2</sub>S with an extremely low detection of limit of 18.57 parts per billion (ppb) at 25°C (room temperature). The response of Ag-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> sensor to 10 parts per million (ppm) H<sub>2</sub>S was enhanced ∼12 times than that of the pristine Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> sensor. The compositing of Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> with Ag nanoparticles (NPs) enabled the fast response/recovery time for H<sub>2</sub>S detection. Further analysis found that the enhanced H<sub>2</sub>S sensing performances could be attributed to chemical sensitisation, adsorbed oxygen species regulation and high Brunauer–Emmett–Teller (BET) surface area. This study paves the way for Ag-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> as room-temperature sensing materials to detect low-concentration H<sub>2</sub>S in GIS.</p>","PeriodicalId":48649,"journal":{"name":"High Voltage","volume":"9 3","pages":"537-545"},"PeriodicalIF":4.4000,"publicationDate":"2023-09-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://onlinelibrary.wiley.com/doi/epdf/10.1049/hve2.12376","citationCount":"0","resultStr":"{\"title\":\"Ag-doped Ti3C2Tx sensor: A promising candidate for low-concentration H2S gas sensing\",\"authors\":\"Fuping Zeng, Xiaoxuan Feng, Xiaoyue Chen, Hao Qiu, Yiming Yan, Qiang Yao, Ju Tang\",\"doi\":\"10.1049/hve2.12376\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>Trace hydrogen sulphide (H<sub>2</sub>S) could reflect the severity of insulation faults in gas-insulated switchgear (GIS), therefore, accurate and fast detection of low-concentration H<sub>2</sub>S is important for on-line monitoring, fault diagnosis, and state evaluation in GIS. Ag-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> chemiresistive-type sensors were fabricated via drop-coating with self-reduction synthesised Ag-doped Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub>. The as-prepared sensors exhibited an excellent sensitivity and selectivity to H<sub>2</sub>S with an extremely low detection of limit of 18.57 parts per billion (ppb) at 25°C (room temperature). The response of Ag-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> sensor to 10 parts per million (ppm) H<sub>2</sub>S was enhanced ∼12 times than that of the pristine Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> sensor. The compositing of Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> with Ag nanoparticles (NPs) enabled the fast response/recovery time for H<sub>2</sub>S detection. Further analysis found that the enhanced H<sub>2</sub>S sensing performances could be attributed to chemical sensitisation, adsorbed oxygen species regulation and high Brunauer–Emmett–Teller (BET) surface area. This study paves the way for Ag-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> as room-temperature sensing materials to detect low-concentration H<sub>2</sub>S in GIS.</p>\",\"PeriodicalId\":48649,\"journal\":{\"name\":\"High Voltage\",\"volume\":\"9 3\",\"pages\":\"537-545\"},\"PeriodicalIF\":4.4000,\"publicationDate\":\"2023-09-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://onlinelibrary.wiley.com/doi/epdf/10.1049/hve2.12376\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"High Voltage\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://onlinelibrary.wiley.com/doi/10.1049/hve2.12376\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"High Voltage","FirstCategoryId":"5","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1049/hve2.12376","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
Ag-doped Ti3C2Tx sensor: A promising candidate for low-concentration H2S gas sensing
Trace hydrogen sulphide (H2S) could reflect the severity of insulation faults in gas-insulated switchgear (GIS), therefore, accurate and fast detection of low-concentration H2S is important for on-line monitoring, fault diagnosis, and state evaluation in GIS. Ag-Ti3C2Tx chemiresistive-type sensors were fabricated via drop-coating with self-reduction synthesised Ag-doped Ti3C2Tx. The as-prepared sensors exhibited an excellent sensitivity and selectivity to H2S with an extremely low detection of limit of 18.57 parts per billion (ppb) at 25°C (room temperature). The response of Ag-Ti3C2Tx sensor to 10 parts per million (ppm) H2S was enhanced ∼12 times than that of the pristine Ti3C2Tx sensor. The compositing of Ti3C2Tx with Ag nanoparticles (NPs) enabled the fast response/recovery time for H2S detection. Further analysis found that the enhanced H2S sensing performances could be attributed to chemical sensitisation, adsorbed oxygen species regulation and high Brunauer–Emmett–Teller (BET) surface area. This study paves the way for Ag-Ti3C2Tx as room-temperature sensing materials to detect low-concentration H2S in GIS.
High VoltageEnergy-Energy Engineering and Power Technology
CiteScore
9.60
自引率
27.30%
发文量
97
审稿时长
21 weeks
期刊介绍:
High Voltage aims to attract original research papers and review articles. The scope covers high-voltage power engineering and high voltage applications, including experimental, computational (including simulation and modelling) and theoretical studies, which include:
Electrical Insulation
● Outdoor, indoor, solid, liquid and gas insulation
● Transient voltages and overvoltage protection
● Nano-dielectrics and new insulation materials
● Condition monitoring and maintenance
Discharge and plasmas, pulsed power
● Electrical discharge, plasma generation and applications
● Interactions of plasma with surfaces
● Pulsed power science and technology
High-field effects
● Computation, measurements of Intensive Electromagnetic Field
● Electromagnetic compatibility
● Biomedical effects
● Environmental effects and protection
High Voltage Engineering
● Design problems, testing and measuring techniques
● Equipment development and asset management
● Smart Grid, live line working
● AC/DC power electronics
● UHV power transmission
Special Issues. Call for papers:
Interface Charging Phenomena for Dielectric Materials - https://digital-library.theiet.org/files/HVE_CFP_ICP.pdf
Emerging Materials For High Voltage Applications - https://digital-library.theiet.org/files/HVE_CFP_EMHVA.pdf