Assessment of Gravity Dressability of Gold Ore - GRG Test

Gravity methods are widely used for processing of gold ores. But many aspects of these processing techniques require improvement. In the study, methods of fire assay, gravimetric, chemical, mineralogical analyses of gold ores were used. In terms of sulfide sulfur content and degree of sulfur oxidation, the gold ore is assigned to the low-sulfide type of ore in the primary zone. Mineralogical analysis showed the ore-bearing rock is represented by phyllite. Gold in the ore occurs mainly in the form of free large and fine particles. The fine gold is closely associated with pyrite. GRG test was carried out for assessing gravity dressability of the gold ore. The total gold recovery is more than 41 %. The highest gold recoveries were achieved at the first stage at 100 % of -1.6 mm ore grain size, and at the third stage at 80 % of -0.071 mm ore grain size. This indicates that both relatively large gold and fine free gold particles are present in the ore. This is also confirmed by mineralogical analysis. The GRG test results showed that the gold ore can be effectively concentrated using centrifugal concentrators. The level of gold recovery by gravity at the multi-stage ore grinding is quite high. When developing the ore concentration process flow sheet, gravity separation in centrifugal concentrators should be included.