多材料复合材料液压缸选用耐磨涂层的耐磨性

IF 0.8 Q3 ENGINEERING, AEROSPACE

Aviation Pub Date : 2022-10-20 DOI:10.3846/aviation.2022.17728

T. Leśniewski, M. Stosiak, M. Lubecki, J. Krawczyk

{"title":"多材料复合材料液压缸选用耐磨涂层的耐磨性","authors":"T. Leśniewski, M. Stosiak, M. Lubecki, J. Krawczyk","doi":"10.3846/aviation.2022.17728","DOIUrl":null,"url":null,"abstract":"The paper presents tribological tests of selected materials used as liners in a composite hydraulic cylinder. Three coating materials were used for the analysis: Sika F180 polyurethane, Huntsman Araldite LY1564 with Aradur 3487 amine hardener and Bezlona 1111 Super Metal. In addition, uncoated carbon epoxy laminate (CFRP) samples were used as reference material. The instantaneous course of the friction force, its maximum and average value, were the analysed parameters. Ball-on-disk tests were performed on a specialised tester that allows, among other things, to control the operating conditions (clamping force, operating temperature, speed, friction path) and measurement of the instantaneous value of the friction force. After these tests, the friction paths were observed using a Leica DCM8 contactless profilometer with an EPI 20x lens. The amount of energy dissipated due to friction was also determined. The conducted tests and comparative analyses allowed to conclude that the F180 material is the most desirable in terms of tribological properties.","PeriodicalId":51910,"journal":{"name":"Aviation","volume":" ","pages":""},"PeriodicalIF":0.8000,"publicationDate":"2022-10-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"WEAR RESISTANCE OF SELECTED ANTI-WEAR COATINGS USED IN MULTI-MATERIAL COMPOSITE HYDRAULIC CYLINDERS\",\"authors\":\"T. Leśniewski, M. Stosiak, M. Lubecki, J. Krawczyk\",\"doi\":\"10.3846/aviation.2022.17728\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper presents tribological tests of selected materials used as liners in a composite hydraulic cylinder. Three coating materials were used for the analysis: Sika F180 polyurethane, Huntsman Araldite LY1564 with Aradur 3487 amine hardener and Bezlona 1111 Super Metal. In addition, uncoated carbon epoxy laminate (CFRP) samples were used as reference material. The instantaneous course of the friction force, its maximum and average value, were the analysed parameters. Ball-on-disk tests were performed on a specialised tester that allows, among other things, to control the operating conditions (clamping force, operating temperature, speed, friction path) and measurement of the instantaneous value of the friction force. After these tests, the friction paths were observed using a Leica DCM8 contactless profilometer with an EPI 20x lens. The amount of energy dissipated due to friction was also determined. The conducted tests and comparative analyses allowed to conclude that the F180 material is the most desirable in terms of tribological properties.\",\"PeriodicalId\":51910,\"journal\":{\"name\":\"Aviation\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2022-10-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Aviation\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3846/aviation.2022.17728\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, AEROSPACE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Aviation","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3846/aviation.2022.17728","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, AEROSPACE","Score":null,"Total":0}

引用次数: 2

摘要

本文介绍了复合液压缸内衬材料的摩擦学试验。采用三种涂层材料进行分析:Sika F180聚氨酯，亨斯迈Araldite LY1564与Aradur 3487胺硬化剂和Bezlona 1111超级金属。另外，以未涂覆的碳环氧复合材料(CFRP)样品作为对照材料。摩擦力的瞬时过程、最大值和平均值为分析参数。球盘测试是在专门的测试机上进行的，除其他外，可以控制操作条件(夹紧力、操作温度、速度、摩擦路径)和测量摩擦力的瞬时值。在这些测试之后，使用Leica DCM8非接触式轮廓仪和EPI 20倍镜头观察摩擦路径。由于摩擦而耗散的能量也被确定。所进行的测试和比较分析允许得出结论，F180材料在摩擦学性能方面是最理想的。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

WEAR RESISTANCE OF SELECTED ANTI-WEAR COATINGS USED IN MULTI-MATERIAL COMPOSITE HYDRAULIC CYLINDERS

The paper presents tribological tests of selected materials used as liners in a composite hydraulic cylinder. Three coating materials were used for the analysis: Sika F180 polyurethane, Huntsman Araldite LY1564 with Aradur 3487 amine hardener and Bezlona 1111 Super Metal. In addition, uncoated carbon epoxy laminate (CFRP) samples were used as reference material. The instantaneous course of the friction force, its maximum and average value, were the analysed parameters. Ball-on-disk tests were performed on a specialised tester that allows, among other things, to control the operating conditions (clamping force, operating temperature, speed, friction path) and measurement of the instantaneous value of the friction force. After these tests, the friction paths were observed using a Leica DCM8 contactless profilometer with an EPI 20x lens. The amount of energy dissipated due to friction was also determined. The conducted tests and comparative analyses allowed to conclude that the F180 material is the most desirable in terms of tribological properties.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Aviation ENGINEERING, AEROSPACE-

CiteScore

2.40

自引率

10.00%

发文量

审稿时长

15 weeks

期刊介绍： CONCERNING THE FOLLOWING FIELDS OF RESEARCH: ▪ Flight Physics ▪ Air Traffic Management ▪ Aerostructures ▪ Airports ▪ Propulsion ▪ Human Factors ▪ Aircraft Avionics, Systems and Equipment ▪ Air Transport Technologies and Development ▪ Flight Mechanics ▪ History of Aviation ▪ Integrated Design and Validation (method and tools) Besides, it publishes: short reports and notes, reviews, reports about conferences and workshops