Reliability and maintainability optimization of load haul dump machines using genetic algorithm and particle swarm optimization

PurposeReliability and maintainability estimation of any system depends on the identification of the best-fitted probability distribution of failure and repair rates. The parameters of the best-fitted probability distribution are also contributing significantly to reliability estimation. In this work, a case study of load haul dump (LHD) machines is illustrated that consider the optimization of failure and repair rate parameters using two well established metaheuristic approaches, namely, genetic algorithm (GA) and particle swarm optimization (PSO). This paper aims to analyze the aforementioned points.Design/methodology/approachThe data on time between failures (TBF) and time to repairs (TTR) are collected for a LHD machine. The descriptive statistical analysis of TBF & TTR data is performed, trend and serial correlation tested and using Anderson–Darling (AD) value best-fitted distributions are identified for repair and failure times of various subsystems. The traditional methods of estimation like maximum likelihood estimation, method of moments, least-square estimation method help only in finding the local solution. Here, for finding the global solution two well-known metaheuristic approaches are applied.FindingsThe reliability of the LHD machine after 60 days on the real data set is 28.55%, using GA on 250 generations is 17.64%, and using PSO on 100 generations and 100 iterations is 30.25%. The PSO technique gives the global best value of reliability.Practical implicationsThe present work will be very convenient for reliability engineers, researchers and maintenance managers to understand the failure and repair pattern of LHD machines. The same methodology can be applied in other process industries also.Originality/valueIn this case study, initially likelihood function of the best-fitted distribution is optimized by GA and PSO. Reliability and maintainability of LHD machines evaluated by the traditional approach, GA and PSO are compared. These results will be very helpful for maintenance engineers to plan new maintenance strategies for better functioning of LHD machines.