V. Mochalova, A. Utkin, V. Sosikov, V. Yakushev, A. Zhukov
{"title":"多孔碳纤维-环氧复合材料的冲击波响应","authors":"V. Mochalova, A. Utkin, V. Sosikov, V. Yakushev, A. Zhukov","doi":"10.1007/s00193-022-01104-3","DOIUrl":null,"url":null,"abstract":"<div><p>An experimental investigation of the shock wave structure, Hugoniot states, and spall strength of a shock-compressed porous carbon fiber–epoxy composite was conducted. To generate high dynamic pressures in the material, the impact of flat-plate aluminum projectiles accelerated by explosive planar shock wave generators to velocities ranging from 0.65 to 5.05 km/s was used. Particle velocity profiles were recorded on the composite surface–water window interface with a multichannel VISAR laser interferometer. On the velocity profiles for the composite with a transverse fiber orientation, a single shock wave was recorded, while for the parallel orientation, a two-wave structure was observed. It was found that the shock wave compressibility of the porous composite did not depend on the fiber orientation relative to the direction of shock wave propagation. A kink on the Hugoniot curve was observed at the pressure of 19 GPa. The results obtained for the porous composite were compared with data for a non-porous carbon–epoxy composite and epoxy resin used as a matrix in the composites. When analyzing dynamic fracture of the porous composite under shock compression, it was found that the spall strength of the material was significantly lower than that of epoxy resin.</p></div>","PeriodicalId":775,"journal":{"name":"Shock Waves","volume":null,"pages":null},"PeriodicalIF":1.7000,"publicationDate":"2022-11-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s00193-022-01104-3.pdf","citationCount":"2","resultStr":"{\"title\":\"Shock wave response of porous carbon fiber–epoxy composite\",\"authors\":\"V. Mochalova, A. Utkin, V. Sosikov, V. Yakushev, A. Zhukov\",\"doi\":\"10.1007/s00193-022-01104-3\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>An experimental investigation of the shock wave structure, Hugoniot states, and spall strength of a shock-compressed porous carbon fiber–epoxy composite was conducted. To generate high dynamic pressures in the material, the impact of flat-plate aluminum projectiles accelerated by explosive planar shock wave generators to velocities ranging from 0.65 to 5.05 km/s was used. Particle velocity profiles were recorded on the composite surface–water window interface with a multichannel VISAR laser interferometer. On the velocity profiles for the composite with a transverse fiber orientation, a single shock wave was recorded, while for the parallel orientation, a two-wave structure was observed. It was found that the shock wave compressibility of the porous composite did not depend on the fiber orientation relative to the direction of shock wave propagation. A kink on the Hugoniot curve was observed at the pressure of 19 GPa. The results obtained for the porous composite were compared with data for a non-porous carbon–epoxy composite and epoxy resin used as a matrix in the composites. When analyzing dynamic fracture of the porous composite under shock compression, it was found that the spall strength of the material was significantly lower than that of epoxy resin.</p></div>\",\"PeriodicalId\":775,\"journal\":{\"name\":\"Shock Waves\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.7000,\"publicationDate\":\"2022-11-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s00193-022-01104-3.pdf\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Shock Waves\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s00193-022-01104-3\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Shock Waves","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s00193-022-01104-3","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MECHANICS","Score":null,"Total":0}
Shock wave response of porous carbon fiber–epoxy composite
An experimental investigation of the shock wave structure, Hugoniot states, and spall strength of a shock-compressed porous carbon fiber–epoxy composite was conducted. To generate high dynamic pressures in the material, the impact of flat-plate aluminum projectiles accelerated by explosive planar shock wave generators to velocities ranging from 0.65 to 5.05 km/s was used. Particle velocity profiles were recorded on the composite surface–water window interface with a multichannel VISAR laser interferometer. On the velocity profiles for the composite with a transverse fiber orientation, a single shock wave was recorded, while for the parallel orientation, a two-wave structure was observed. It was found that the shock wave compressibility of the porous composite did not depend on the fiber orientation relative to the direction of shock wave propagation. A kink on the Hugoniot curve was observed at the pressure of 19 GPa. The results obtained for the porous composite were compared with data for a non-porous carbon–epoxy composite and epoxy resin used as a matrix in the composites. When analyzing dynamic fracture of the porous composite under shock compression, it was found that the spall strength of the material was significantly lower than that of epoxy resin.
期刊介绍：
Shock Waves provides a forum for presenting and discussing new results in all fields where shock and detonation phenomena play a role. The journal addresses physicists, engineers and applied mathematicians working on theoretical, experimental or numerical issues, including diagnostics and flow visualization.
The research fields considered include, but are not limited to, aero- and gas dynamics, acoustics, physical chemistry, condensed matter and plasmas, with applications encompassing materials sciences, space sciences, geosciences, life sciences and medicine.
Of particular interest are contributions which provide insights into fundamental aspects of the techniques that are relevant to more than one specific research community.
The journal publishes scholarly research papers, invited review articles and short notes, as well as comments on papers already published in this journal. Occasionally concise meeting reports of interest to the Shock Waves community are published.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
