Mechanical characteristics of compressed earth blocks, compressed stabilized earth blocks and stabilized adobe bricks with cement in the town of Ngaoundere - Cameroon

The aim of this study is to examine the effects of cement stabilization on the mechanical stress of compressed stabilized earth blocks (CSEBs) and adobe stabilized earth bricks (ASEBs). Hence, this work is based on an experimental study carried out in order to determine the geotechnical properties of the samples soil, namely, the dry particle size analysis after washing, the particle size distribution by sedimentometry, Atterberg limits, and the preparation of specimens with different levels of cement  proportions. Moreover, single compression and three-point bending compression out on specimens measuring 4x4x4cm3 and 4x4x16cm3 respectively. The findings indicate that dosing with 8% cement results in a clear increase in compression stress of approximately 25.55% for CSEBs compared to the reference set at 0% and 22.85% for ASEBs. On the other hand, for a dosage of 4%, we observe a slight increase in stress by simple compression of around 3.26% for CSEBs and 3.14% for ASEBs. For three-point bending compression for a cement dosage of 8%, there is also an increase in stress of about 25% for the CSEBs compared to the reference taken at 0% and 23.02% for the ASEBs.