Leo J Small, Stephen J Percival, Matthew J Hurlock, David X Rademacher, Michael E Ureña, Melissa L Meyerson, Mara E Schindelholz, Tina M Nenoff
{"title":"基于H2O共吸附的Cu(cyhdc) MOF传感器异常检测NH3。","authors":"Leo J Small, Stephen J Percival, Matthew J Hurlock, David X Rademacher, Michael E Ureña, Melissa L Meyerson, Mara E Schindelholz, Tina M Nenoff","doi":"10.1021/acsami.5c13480","DOIUrl":null,"url":null,"abstract":"<p><p>Metal-organic framework (MOF)-based electrical impedance sensors are a growing class of sensors that show utility in the detection of environmentally toxic gases. Detection of trace NH<sub>3</sub> has been particularly difficult to design due to the low electrical response of NH<sub>3</sub>. However, this has been circumvented by judiciously selecting a MOF that has enhanced electrical response to NH<sub>3</sub> due to coadsorption with predominant atmospheric gases such as water. Herein, an MOF Cu(cyhdc) based sensor has been successfully demonstrated for the enhanced detection of environmentally toxic NH<sub>3</sub> gas. The sensor shows a change in impedance when it is exposed to 5 ppm of NH<sub>3</sub>. At 20 °C, >30% relative humidity (RH) is necessary to elicit a change, with the response increasing with RH and reaching 3170× at 92% RH, producing the largest published response to NH<sub>3</sub> for a MOF direct electrical sensor. In the absence of water, no change is observed toward 5 ppm of NH<sub>3</sub> over 20-50 °C. This electrical response is largely driven by huge decreases in the imaginary component of the impedance, attributed to increased capacitance at the surface of the MOF crystallites upon NH<sub>3</sub> and H<sub>2</sub>O coadsorption. Complementary structural and microstructural characterization proves that the Cu(cyhdc) crystalline structure and morphology remain intact under trace NH<sub>3</sub> and/or H<sub>2</sub>O adsorption. Despite extremely low NH<sub>3</sub>, loadings seen in TGA, XPS, and FT-IR confirm NH<sub>3</sub> and H<sub>2</sub>O adsorption, and changes to the metal-carboxylate IR peak positions are observed upon NH<sub>3</sub> adsorption. Concentrated primarily at the outer surfaces of the MOF crystallites, this NH<sub>3</sub> and H<sub>2</sub>O coadsorption effectively increases the surface capacitance across the Cu(cyhdc) powder and enables direct electrical detection of trace NH<sub>3</sub>. Together, these results demonstrate how coadsorption of specific molecules (H<sub>2</sub>O) can be used to enable the electrical detection of trace toxic gases that would otherwise not have produced a MOF sensor response.</p>","PeriodicalId":5,"journal":{"name":"ACS Applied Materials & Interfaces","volume":" ","pages":""},"PeriodicalIF":8.2000,"publicationDate":"2025-10-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Exceptional NH<sub>3</sub> Detection by Cu(cyhdc) MOF Sensor Due to H<sub>2</sub>O Coadsorption.\",\"authors\":\"Leo J Small, Stephen J Percival, Matthew J Hurlock, David X Rademacher, Michael E Ureña, Melissa L Meyerson, Mara E Schindelholz, Tina M Nenoff\",\"doi\":\"10.1021/acsami.5c13480\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>Metal-organic framework (MOF)-based electrical impedance sensors are a growing class of sensors that show utility in the detection of environmentally toxic gases. Detection of trace NH<sub>3</sub> has been particularly difficult to design due to the low electrical response of NH<sub>3</sub>. However, this has been circumvented by judiciously selecting a MOF that has enhanced electrical response to NH<sub>3</sub> due to coadsorption with predominant atmospheric gases such as water. Herein, an MOF Cu(cyhdc) based sensor has been successfully demonstrated for the enhanced detection of environmentally toxic NH<sub>3</sub> gas. The sensor shows a change in impedance when it is exposed to 5 ppm of NH<sub>3</sub>. At 20 °C, >30% relative humidity (RH) is necessary to elicit a change, with the response increasing with RH and reaching 3170× at 92% RH, producing the largest published response to NH<sub>3</sub> for a MOF direct electrical sensor. In the absence of water, no change is observed toward 5 ppm of NH<sub>3</sub> over 20-50 °C. This electrical response is largely driven by huge decreases in the imaginary component of the impedance, attributed to increased capacitance at the surface of the MOF crystallites upon NH<sub>3</sub> and H<sub>2</sub>O coadsorption. Complementary structural and microstructural characterization proves that the Cu(cyhdc) crystalline structure and morphology remain intact under trace NH<sub>3</sub> and/or H<sub>2</sub>O adsorption. Despite extremely low NH<sub>3</sub>, loadings seen in TGA, XPS, and FT-IR confirm NH<sub>3</sub> and H<sub>2</sub>O adsorption, and changes to the metal-carboxylate IR peak positions are observed upon NH<sub>3</sub> adsorption. Concentrated primarily at the outer surfaces of the MOF crystallites, this NH<sub>3</sub> and H<sub>2</sub>O coadsorption effectively increases the surface capacitance across the Cu(cyhdc) powder and enables direct electrical detection of trace NH<sub>3</sub>. Together, these results demonstrate how coadsorption of specific molecules (H<sub>2</sub>O) can be used to enable the electrical detection of trace toxic gases that would otherwise not have produced a MOF sensor response.</p>\",\"PeriodicalId\":5,\"journal\":{\"name\":\"ACS Applied Materials & Interfaces\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":8.2000,\"publicationDate\":\"2025-10-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"ACS Applied Materials & Interfaces\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1021/acsami.5c13480\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Materials & Interfaces","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1021/acsami.5c13480","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Exceptional NH3 Detection by Cu(cyhdc) MOF Sensor Due to H2O Coadsorption.
Metal-organic framework (MOF)-based electrical impedance sensors are a growing class of sensors that show utility in the detection of environmentally toxic gases. Detection of trace NH3 has been particularly difficult to design due to the low electrical response of NH3. However, this has been circumvented by judiciously selecting a MOF that has enhanced electrical response to NH3 due to coadsorption with predominant atmospheric gases such as water. Herein, an MOF Cu(cyhdc) based sensor has been successfully demonstrated for the enhanced detection of environmentally toxic NH3 gas. The sensor shows a change in impedance when it is exposed to 5 ppm of NH3. At 20 °C, >30% relative humidity (RH) is necessary to elicit a change, with the response increasing with RH and reaching 3170× at 92% RH, producing the largest published response to NH3 for a MOF direct electrical sensor. In the absence of water, no change is observed toward 5 ppm of NH3 over 20-50 °C. This electrical response is largely driven by huge decreases in the imaginary component of the impedance, attributed to increased capacitance at the surface of the MOF crystallites upon NH3 and H2O coadsorption. Complementary structural and microstructural characterization proves that the Cu(cyhdc) crystalline structure and morphology remain intact under trace NH3 and/or H2O adsorption. Despite extremely low NH3, loadings seen in TGA, XPS, and FT-IR confirm NH3 and H2O adsorption, and changes to the metal-carboxylate IR peak positions are observed upon NH3 adsorption. Concentrated primarily at the outer surfaces of the MOF crystallites, this NH3 and H2O coadsorption effectively increases the surface capacitance across the Cu(cyhdc) powder and enables direct electrical detection of trace NH3. Together, these results demonstrate how coadsorption of specific molecules (H2O) can be used to enable the electrical detection of trace toxic gases that would otherwise not have produced a MOF sensor response.
期刊介绍:
ACS Applied Materials & Interfaces is a leading interdisciplinary journal that brings together chemists, engineers, physicists, and biologists to explore the development and utilization of newly-discovered materials and interfacial processes for specific applications. Our journal has experienced remarkable growth since its establishment in 2009, both in terms of the number of articles published and the impact of the research showcased. We are proud to foster a truly global community, with the majority of published articles originating from outside the United States, reflecting the rapid growth of applied research worldwide.