Hanxu Ma,Shaoning Zheng,Runqiu Wang,Ying He,Yanjun Chen,Xiaorong Sun,Shunda Qiao,Yufei Ma
{"title":"由低频弹弓形石英音叉和光学增强实现的超灵敏CH4-LITES传感器。","authors":"Hanxu Ma,Shaoning Zheng,Runqiu Wang,Ying He,Yanjun Chen,Xiaorong Sun,Shunda Qiao,Yufei Ma","doi":"10.1021/acssensors.5c02573","DOIUrl":null,"url":null,"abstract":"This paper reports for the first time an ultrasensitive methane (CH4)-LITES sensor based on a low-frequency slingshot-shaped quartz tuning fork (QTF) and optical enhancement. The slingshot-shaped QTF serves as the core innovative component, featuring low resonant frequency (∼7.9 kHz), wide prong gap (>1000 μm), and slingshot-shaped curved transition structure, which significantly extends acoustic energy accumulation time, suppresses optical scattering noise, and optimizes stress distribution, thereby comprehensively enhancing sensing performance. Finite element simulation results demonstrate that, compared to a standard commercial QTF, the maximum temperature gradient and total surface charge of the slingshot-shaped QTF increased by factors of 3.53 and 2.68, respectively. Experimental validation shows that the signal-to-noise ratio (SNR) of the LITES system based on this slingshot-shaped QTF improved by 2.26 times compared to the system using a standard QTF. To further optimize the detection performance for CH4, a Raman fiber amplifier (RFA) was employed to enhance the power of the diode laser, while a multipass cell (MPC) with a dense spot pattern and an optical path length of approximately 80 m, along with a self-designed amplifier, were used to promote gas absorption and enhance signal gain, respectively. These three components work synergistically to effectively improve the sensor's detection capability by increasing excitation intensity, promoting gas absorption, and enhancing signal gain. In this configuration, the sensor's minimum detection limit (MDL) for CH4 was calculated to be 8.42 ppb, and the noise-equivalent normalized absorption coefficient (NNEA) was calculated as 1.38 × 10-9 cm-1·W·Hz-1/2. Allan deviation analysis indicated that at an averaging time of 350 s, the sensor's MDL was optimized to 0.72 ppb. This study provides a novel QTF structure with significant performance advantages and an optical enhancement strategy for highly sensitive CH4 gas detection, holding important application prospects in fields such as environmental monitoring and industrial safety.","PeriodicalId":24,"journal":{"name":"ACS Sensors","volume":"31 1","pages":""},"PeriodicalIF":9.1000,"publicationDate":"2025-10-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Ultra-Sensitive CH4-LITES Sensor Enabled by Low-Frequency Slingshot-Shaped Quartz Tuning Fork and Optical Enhancement.\",\"authors\":\"Hanxu Ma,Shaoning Zheng,Runqiu Wang,Ying He,Yanjun Chen,Xiaorong Sun,Shunda Qiao,Yufei Ma\",\"doi\":\"10.1021/acssensors.5c02573\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper reports for the first time an ultrasensitive methane (CH4)-LITES sensor based on a low-frequency slingshot-shaped quartz tuning fork (QTF) and optical enhancement. The slingshot-shaped QTF serves as the core innovative component, featuring low resonant frequency (∼7.9 kHz), wide prong gap (>1000 μm), and slingshot-shaped curved transition structure, which significantly extends acoustic energy accumulation time, suppresses optical scattering noise, and optimizes stress distribution, thereby comprehensively enhancing sensing performance. Finite element simulation results demonstrate that, compared to a standard commercial QTF, the maximum temperature gradient and total surface charge of the slingshot-shaped QTF increased by factors of 3.53 and 2.68, respectively. Experimental validation shows that the signal-to-noise ratio (SNR) of the LITES system based on this slingshot-shaped QTF improved by 2.26 times compared to the system using a standard QTF. To further optimize the detection performance for CH4, a Raman fiber amplifier (RFA) was employed to enhance the power of the diode laser, while a multipass cell (MPC) with a dense spot pattern and an optical path length of approximately 80 m, along with a self-designed amplifier, were used to promote gas absorption and enhance signal gain, respectively. These three components work synergistically to effectively improve the sensor's detection capability by increasing excitation intensity, promoting gas absorption, and enhancing signal gain. In this configuration, the sensor's minimum detection limit (MDL) for CH4 was calculated to be 8.42 ppb, and the noise-equivalent normalized absorption coefficient (NNEA) was calculated as 1.38 × 10-9 cm-1·W·Hz-1/2. Allan deviation analysis indicated that at an averaging time of 350 s, the sensor's MDL was optimized to 0.72 ppb. This study provides a novel QTF structure with significant performance advantages and an optical enhancement strategy for highly sensitive CH4 gas detection, holding important application prospects in fields such as environmental monitoring and industrial safety.\",\"PeriodicalId\":24,\"journal\":{\"name\":\"ACS Sensors\",\"volume\":\"31 1\",\"pages\":\"\"},\"PeriodicalIF\":9.1000,\"publicationDate\":\"2025-10-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"ACS Sensors\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://doi.org/10.1021/acssensors.5c02573\",\"RegionNum\":1,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"CHEMISTRY, ANALYTICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Sensors","FirstCategoryId":"92","ListUrlMain":"https://doi.org/10.1021/acssensors.5c02573","RegionNum":1,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, ANALYTICAL","Score":null,"Total":0}
Ultra-Sensitive CH4-LITES Sensor Enabled by Low-Frequency Slingshot-Shaped Quartz Tuning Fork and Optical Enhancement.
This paper reports for the first time an ultrasensitive methane (CH4)-LITES sensor based on a low-frequency slingshot-shaped quartz tuning fork (QTF) and optical enhancement. The slingshot-shaped QTF serves as the core innovative component, featuring low resonant frequency (∼7.9 kHz), wide prong gap (>1000 μm), and slingshot-shaped curved transition structure, which significantly extends acoustic energy accumulation time, suppresses optical scattering noise, and optimizes stress distribution, thereby comprehensively enhancing sensing performance. Finite element simulation results demonstrate that, compared to a standard commercial QTF, the maximum temperature gradient and total surface charge of the slingshot-shaped QTF increased by factors of 3.53 and 2.68, respectively. Experimental validation shows that the signal-to-noise ratio (SNR) of the LITES system based on this slingshot-shaped QTF improved by 2.26 times compared to the system using a standard QTF. To further optimize the detection performance for CH4, a Raman fiber amplifier (RFA) was employed to enhance the power of the diode laser, while a multipass cell (MPC) with a dense spot pattern and an optical path length of approximately 80 m, along with a self-designed amplifier, were used to promote gas absorption and enhance signal gain, respectively. These three components work synergistically to effectively improve the sensor's detection capability by increasing excitation intensity, promoting gas absorption, and enhancing signal gain. In this configuration, the sensor's minimum detection limit (MDL) for CH4 was calculated to be 8.42 ppb, and the noise-equivalent normalized absorption coefficient (NNEA) was calculated as 1.38 × 10-9 cm-1·W·Hz-1/2. Allan deviation analysis indicated that at an averaging time of 350 s, the sensor's MDL was optimized to 0.72 ppb. This study provides a novel QTF structure with significant performance advantages and an optical enhancement strategy for highly sensitive CH4 gas detection, holding important application prospects in fields such as environmental monitoring and industrial safety.
期刊介绍:
ACS Sensors is a peer-reviewed research journal that focuses on the dissemination of new and original knowledge in the field of sensor science, particularly those that selectively sense chemical or biological species or processes. The journal covers a broad range of topics, including but not limited to biosensors, chemical sensors, gas sensors, intracellular sensors, single molecule sensors, cell chips, and microfluidic devices. It aims to publish articles that address conceptual advances in sensing technology applicable to various types of analytes or application papers that report on the use of existing sensing concepts in new ways or for new analytes.