{"title":"地震作用下独立岩滑刚性块体的地震易损性","authors":"Nicola A. Nodargi, Paolo Bisegna","doi":"10.1007/s11012-025-01986-4","DOIUrl":null,"url":null,"abstract":"<div><p>The seismic fragility of free-standing rigid blocks under earthquake excitation is investigated, focusing on the combined effect of rocking and sliding in their dynamic response. A variational-based formulation of the non-smooth contact dynamics method is employed for the problem solution, requiring the solution of a quadratic programming problem at each time step in the three unknown block scalar velocities. Such an approach efficiently captures all possible block response modes, including rocking, sliding, rocking-sliding, and free flight. The seismic fragility of both slender and stocky blocks is evaluated through a multiple-stripe analysis, introducing overturning-sliding fragility curves that account for overturning and excessive-sliding limit states. Numerical validation against benchmark results confirms the accuracy of the proposed formulation, showing that while a no-sliding assumption is reliable for slender blocks, it may prove unsafe for stocky blocks, even assuming high friction at the foundation. The resulting overturning-sliding fragility curves highlight the dependence of the block response on the normalized friction coefficient, defined as the ratio of the friction coefficient to the block slenderness. Blocks with a normalized friction coefficient below unity exhibit an isolation effect, preventing overturning at the cost of significant sliding. Conversely, blocks with normalized friction coefficient above unity undergo rocking-sliding or pure-rocking motion, which can lead to overturning. Accordingly, the overturning-sliding fragility curves are determined by the interplay between overturning and excessive-sliding limit states, as governed by a prescribed sliding displacement capacity. For typical values of the friction coefficient at the block-foundation interface, slender blocks are largely unaffected by sliding, whereas overturning-sliding or sliding fragility curves are crucial for accurately assessing the seismic performance of stocky blocks.</p></div>","PeriodicalId":695,"journal":{"name":"Meccanica","volume":"60 8","pages":"2411 - 2435"},"PeriodicalIF":2.1000,"publicationDate":"2025-05-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Seismic fragility of free-standing rocking-sliding rigid blocks under earthquake excitation\",\"authors\":\"Nicola A. Nodargi, Paolo Bisegna\",\"doi\":\"10.1007/s11012-025-01986-4\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The seismic fragility of free-standing rigid blocks under earthquake excitation is investigated, focusing on the combined effect of rocking and sliding in their dynamic response. A variational-based formulation of the non-smooth contact dynamics method is employed for the problem solution, requiring the solution of a quadratic programming problem at each time step in the three unknown block scalar velocities. Such an approach efficiently captures all possible block response modes, including rocking, sliding, rocking-sliding, and free flight. The seismic fragility of both slender and stocky blocks is evaluated through a multiple-stripe analysis, introducing overturning-sliding fragility curves that account for overturning and excessive-sliding limit states. Numerical validation against benchmark results confirms the accuracy of the proposed formulation, showing that while a no-sliding assumption is reliable for slender blocks, it may prove unsafe for stocky blocks, even assuming high friction at the foundation. The resulting overturning-sliding fragility curves highlight the dependence of the block response on the normalized friction coefficient, defined as the ratio of the friction coefficient to the block slenderness. Blocks with a normalized friction coefficient below unity exhibit an isolation effect, preventing overturning at the cost of significant sliding. Conversely, blocks with normalized friction coefficient above unity undergo rocking-sliding or pure-rocking motion, which can lead to overturning. Accordingly, the overturning-sliding fragility curves are determined by the interplay between overturning and excessive-sliding limit states, as governed by a prescribed sliding displacement capacity. For typical values of the friction coefficient at the block-foundation interface, slender blocks are largely unaffected by sliding, whereas overturning-sliding or sliding fragility curves are crucial for accurately assessing the seismic performance of stocky blocks.</p></div>\",\"PeriodicalId\":695,\"journal\":{\"name\":\"Meccanica\",\"volume\":\"60 8\",\"pages\":\"2411 - 2435\"},\"PeriodicalIF\":2.1000,\"publicationDate\":\"2025-05-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Meccanica\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11012-025-01986-4\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Meccanica","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s11012-025-01986-4","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MECHANICS","Score":null,"Total":0}
Seismic fragility of free-standing rocking-sliding rigid blocks under earthquake excitation
The seismic fragility of free-standing rigid blocks under earthquake excitation is investigated, focusing on the combined effect of rocking and sliding in their dynamic response. A variational-based formulation of the non-smooth contact dynamics method is employed for the problem solution, requiring the solution of a quadratic programming problem at each time step in the three unknown block scalar velocities. Such an approach efficiently captures all possible block response modes, including rocking, sliding, rocking-sliding, and free flight. The seismic fragility of both slender and stocky blocks is evaluated through a multiple-stripe analysis, introducing overturning-sliding fragility curves that account for overturning and excessive-sliding limit states. Numerical validation against benchmark results confirms the accuracy of the proposed formulation, showing that while a no-sliding assumption is reliable for slender blocks, it may prove unsafe for stocky blocks, even assuming high friction at the foundation. The resulting overturning-sliding fragility curves highlight the dependence of the block response on the normalized friction coefficient, defined as the ratio of the friction coefficient to the block slenderness. Blocks with a normalized friction coefficient below unity exhibit an isolation effect, preventing overturning at the cost of significant sliding. Conversely, blocks with normalized friction coefficient above unity undergo rocking-sliding or pure-rocking motion, which can lead to overturning. Accordingly, the overturning-sliding fragility curves are determined by the interplay between overturning and excessive-sliding limit states, as governed by a prescribed sliding displacement capacity. For typical values of the friction coefficient at the block-foundation interface, slender blocks are largely unaffected by sliding, whereas overturning-sliding or sliding fragility curves are crucial for accurately assessing the seismic performance of stocky blocks.
期刊介绍:
Meccanica focuses on the methodological framework shared by mechanical scientists when addressing theoretical or applied problems. Original papers address various aspects of mechanical and mathematical modeling, of solution, as well as of analysis of system behavior. The journal explores fundamental and applications issues in established areas of mechanics research as well as in emerging fields; contemporary research on general mechanics, solid and structural mechanics, fluid mechanics, and mechanics of machines; interdisciplinary fields between mechanics and other mathematical and engineering sciences; interaction of mechanics with dynamical systems, advanced materials, control and computation; electromechanics; biomechanics.
Articles include full length papers; topical overviews; brief notes; discussions and comments on published papers; book reviews; and an international calendar of conferences.
Meccanica, the official journal of the Italian Association of Theoretical and Applied Mechanics, was established in 1966.