Sheerin Masroor, M Z A Rafiquee, Ajay Kumar, Mohd Mobin, Omar Dagdag, Avni Berisha, Mohammad Ehtisham Khan
{"title":"阴离子表面活性剂及其纳米复合材料作为牙种植体的缓蚀剂。","authors":"Sheerin Masroor, M Z A Rafiquee, Ajay Kumar, Mohd Mobin, Omar Dagdag, Avni Berisha, Mohammad Ehtisham Khan","doi":"10.1007/s10266-025-01192-4","DOIUrl":null,"url":null,"abstract":"<p><p>Dental implants are continuously exposed to aggressive oral conditions that can trigger corrosion and compromise their long-term success. In the present work, findings highlight the potential of surfactant nanocomposities (NCs), sodium dodecyl sulfate (SDS) with the titanium oxide (TiO₂) nanoparticals (NPs), which were evaluated as corrosion inhibitors using mild steel as a model substrate in artificial saliva. Electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP) measurements revealed that the SDS-TiO₂ system achieved markedly higher inhibition efficiency than SDS alone, owing to strong adsorption and stable inhibitor-surface interactions. Structural characterization confirmed nanoscale particle size and stability. Transmission electron microscopy (TEM) confirmed nanoscale dimensions (13.9-28.6 nm) and and zeta-sizer analysis revealed a single sharp peak with an approximate size of 17 nm with good stability, supporting its effective performance. The high E<sub>ads</sub> value ( - 2585.50 kcal/mol) for the SDS-TiO<sub>2</sub> NCs system reflects the greater stability (inhibitor/surface interaction) and consequently increases their inhibition efficiencies. Statistical analysis (ANOVA, p < 0.05) further validated the significant improvement in resistance parameters with SDS-TiO₂. Computational modeling (DFT, Monte Carlo (MC), and Molecular Dynamics (MD) simulations) corroborated experimental findings by demonstrating the strong binding affinity of the inhibitor system adsorbed on the surface of Fe (110) by a horizontal orientation. While mild steel was employed as a surrogate, these results highlight the translational promise of SDS-TiO₂ NCs for enhancing corrosion resistance in dental implant environments. Future validation of the present findings on clinically relevant alloys (CP-Ti and Ti-6Al-4 V) is essential to confirm the translational potential of SDS-TiO₂ systems for real-world dental implant applications. This addition strengthens the clinical anchoring of the study by outlining a clear direction for future research.</p>","PeriodicalId":19390,"journal":{"name":"Odontology","volume":" ","pages":""},"PeriodicalIF":2.4000,"publicationDate":"2025-09-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Anionic surfactant and its nanocomposite as corrosion inhibitors for dental implants.\",\"authors\":\"Sheerin Masroor, M Z A Rafiquee, Ajay Kumar, Mohd Mobin, Omar Dagdag, Avni Berisha, Mohammad Ehtisham Khan\",\"doi\":\"10.1007/s10266-025-01192-4\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>Dental implants are continuously exposed to aggressive oral conditions that can trigger corrosion and compromise their long-term success. In the present work, findings highlight the potential of surfactant nanocomposities (NCs), sodium dodecyl sulfate (SDS) with the titanium oxide (TiO₂) nanoparticals (NPs), which were evaluated as corrosion inhibitors using mild steel as a model substrate in artificial saliva. Electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP) measurements revealed that the SDS-TiO₂ system achieved markedly higher inhibition efficiency than SDS alone, owing to strong adsorption and stable inhibitor-surface interactions. Structural characterization confirmed nanoscale particle size and stability. Transmission electron microscopy (TEM) confirmed nanoscale dimensions (13.9-28.6 nm) and and zeta-sizer analysis revealed a single sharp peak with an approximate size of 17 nm with good stability, supporting its effective performance. The high E<sub>ads</sub> value ( - 2585.50 kcal/mol) for the SDS-TiO<sub>2</sub> NCs system reflects the greater stability (inhibitor/surface interaction) and consequently increases their inhibition efficiencies. Statistical analysis (ANOVA, p < 0.05) further validated the significant improvement in resistance parameters with SDS-TiO₂. Computational modeling (DFT, Monte Carlo (MC), and Molecular Dynamics (MD) simulations) corroborated experimental findings by demonstrating the strong binding affinity of the inhibitor system adsorbed on the surface of Fe (110) by a horizontal orientation. While mild steel was employed as a surrogate, these results highlight the translational promise of SDS-TiO₂ NCs for enhancing corrosion resistance in dental implant environments. Future validation of the present findings on clinically relevant alloys (CP-Ti and Ti-6Al-4 V) is essential to confirm the translational potential of SDS-TiO₂ systems for real-world dental implant applications. This addition strengthens the clinical anchoring of the study by outlining a clear direction for future research.</p>\",\"PeriodicalId\":19390,\"journal\":{\"name\":\"Odontology\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":2.4000,\"publicationDate\":\"2025-09-17\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Odontology\",\"FirstCategoryId\":\"3\",\"ListUrlMain\":\"https://doi.org/10.1007/s10266-025-01192-4\",\"RegionNum\":3,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"DENTISTRY, ORAL SURGERY & MEDICINE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Odontology","FirstCategoryId":"3","ListUrlMain":"https://doi.org/10.1007/s10266-025-01192-4","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"DENTISTRY, ORAL SURGERY & MEDICINE","Score":null,"Total":0}
引用次数: 0
摘要
牙种植体不断暴露在具有侵略性的口腔环境中,这会引发腐蚀并危及其长期成功。在本研究中,研究结果强调了表面活性剂纳米复合材料(NCs)的潜力,十二烷基硫酸钠(SDS)和氧化钛(tio2)纳米颗粒(NPs),以低碳钢为模型底物在人工唾液中作为缓蚀剂进行了评估。电化学阻抗谱(EIS)和开路电位(OCP)测试结果表明,SDS- tio2体系具有较强的吸附能力和稳定的表面相互作用,明显优于SDS体系。结构表征证实了纳米级颗粒的大小和稳定性。透射电子显微镜(TEM)和zeta-size分析证实了其纳米尺寸(13.9-28.6 nm),并显示了一个约为17 nm的单峰,具有良好的稳定性,支持其有效性能。SDS-TiO2 NCs体系具有较高的Eads值(- 2585.50 kcal/mol),反映了SDS-TiO2 NCs体系具有较高的稳定性(抑制剂/表面相互作用),从而提高了其缓蚀效率。统计分析(ANOVA, p
Anionic surfactant and its nanocomposite as corrosion inhibitors for dental implants.
Dental implants are continuously exposed to aggressive oral conditions that can trigger corrosion and compromise their long-term success. In the present work, findings highlight the potential of surfactant nanocomposities (NCs), sodium dodecyl sulfate (SDS) with the titanium oxide (TiO₂) nanoparticals (NPs), which were evaluated as corrosion inhibitors using mild steel as a model substrate in artificial saliva. Electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP) measurements revealed that the SDS-TiO₂ system achieved markedly higher inhibition efficiency than SDS alone, owing to strong adsorption and stable inhibitor-surface interactions. Structural characterization confirmed nanoscale particle size and stability. Transmission electron microscopy (TEM) confirmed nanoscale dimensions (13.9-28.6 nm) and and zeta-sizer analysis revealed a single sharp peak with an approximate size of 17 nm with good stability, supporting its effective performance. The high Eads value ( - 2585.50 kcal/mol) for the SDS-TiO2 NCs system reflects the greater stability (inhibitor/surface interaction) and consequently increases their inhibition efficiencies. Statistical analysis (ANOVA, p < 0.05) further validated the significant improvement in resistance parameters with SDS-TiO₂. Computational modeling (DFT, Monte Carlo (MC), and Molecular Dynamics (MD) simulations) corroborated experimental findings by demonstrating the strong binding affinity of the inhibitor system adsorbed on the surface of Fe (110) by a horizontal orientation. While mild steel was employed as a surrogate, these results highlight the translational promise of SDS-TiO₂ NCs for enhancing corrosion resistance in dental implant environments. Future validation of the present findings on clinically relevant alloys (CP-Ti and Ti-6Al-4 V) is essential to confirm the translational potential of SDS-TiO₂ systems for real-world dental implant applications. This addition strengthens the clinical anchoring of the study by outlining a clear direction for future research.
期刊介绍:
The Journal Odontology covers all disciplines involved in the fields of dentistry and craniofacial research, including molecular studies related to oral health and disease. Peer-reviewed articles cover topics ranging from research on human dental pulp, to comparisons of analgesics in surgery, to analysis of biofilm properties of dental plaque.